Hola, no contesta mucho este genio, el tema de dos a la vez depende que esten descargadas igual, como asi tambien igual marca, etc... es mas, este circuito debería ponerse un diodo a la salida positiva hacia la bateria ya que puede sobrepasar toda la carga hacia el circuito, hay muchos videos mostrando el peligro que puede ser cargar varias juntas, consejo carga de a una o hacete dos circuitos idem. saludos
La idea de cargar en paralelo es menos peligrosa que cargar en serie, pero como dice el otro comentario, es recomendable cargar una pila a la vez, solo por seguridad, saludos.
You can use any NPN power transistor, but take care of pin outs as different transistors have different pin configurations. 13005/13003 has pin (1 Base, 2 Collector, 3 Emitter)
@@CreativeTechos You have a great creativity in yourself . But it's just a waste of time and money tp4056 would cost around like 0.25 USD .And it will give 1A output and if you modify it just by changing resistor it can give 2A output the.
This circuit requires 5v dc and output voltage is dropped to 4.2 v using TL431 shunt regulator and 680R resistor, with limiting current with 47R. It requires 4.2v to charge a 3.7v lithium batteries.
I have a power supply charger for cameras, and its capacity is 12 volts - 16 amps. It has a variable resistance to raise and lower the voltage. Is it suitable for this project?
Buenos días hice los dos tipos de cargador de batería 12v que aparecen en los vídeos pero ninguno marca cuando la batería está cargada alguna solución o que hice mal ?
TRANSITOR HAI YA MOSFET VIDEO ME DIKHATE HO MAGAR DIKH NAHI PATA ES LIYE SCREEN PAR BAJU ME ALAG SE JO BHI COMPONENT LAGATE HO SCREEN PAR DIKHANA CHAHIYE VARNA AAP KE VIDEO DEKHNE VALE KO KYA FAIDA
I thing so This channel maybe fake because i can make more circuit but this channel showing is wrong info only this channel circuit not working i can try many time but result is not working so guys plzz avoid this channel video and save your time and money
Circuit Diagram link & Part List Given in video description.
Интересное решение. Можно добавить пищалку для оповещения об окончании заряда акб.
Good work 👍
Super 👍👍😎✊️
Thanks for watching my friend 🙂
very very good video ❤❤❤❤❤❤ but ,can i use 13007 instead of 13005?
Thanks thanks thanks thanks your support good bless you 🙏🌹🌹🌹
My pleasure, Thanks for watching my friend 🙂
Nice video🙂👍
Thanks for watching 🙂
Bro it is too nice it will get for us for volt two battery
Keep up the good work
Thanks for sharing
Thanks for watching 🙂
Very nice👏👍💝
Thanks for watching 🙂
Terima kasih atas tutorialnya
My pleasure, Thanks for watching 🙂
nice video, did u hv simple auto cut for 2s lithium battery video? thx.
Recently uploaded, check out on channel
I like your work
Glad to hear that, Thanks for watching 🙂
can it charge 5000mah also shouldnt it be 4.2v when fully charged?
Yes, absolutely it can charge, and charging te may be little longer
10часов ждать
Thank you bro❤
Nice, circuit. Your multimeter is very good please give link for purchase this type multimeter
amzn.eu/d/5Tls5PH
Thanks 1000 for always! place the circuit. I feel very respected. Thank you! And good life
Thanks for watching 🙂
Thank you very much
can it use for powerbank or smartphone?whats must be modified
Osm dear 💕
Thanks for liking
MUY BUENO GENIO ,MI PREGUNTA ES SI SE PUEDE CARGAR DOS BATERIAS 18650 EN PARALELO CON ESTE CIRCUITO
Hola, no contesta mucho este genio, el tema de dos a la vez depende que esten descargadas igual, como asi tambien igual marca, etc... es mas, este circuito debería ponerse un diodo a la salida positiva hacia la bateria ya que puede sobrepasar toda la carga hacia el circuito, hay muchos videos mostrando el peligro que puede ser cargar varias juntas, consejo carga de a una o hacete dos circuitos idem. saludos
La idea de cargar en paralelo es menos peligrosa que cargar en serie, pero como dice el otro comentario, es recomendable cargar una pila a la vez, solo por seguridad, saludos.
Can still battery put without removing after fully time in these circuit as auto cut off by mosfet?
Good work
If I do not have 13005 Transistor
Is there an alternative to it ??
You can use any NPN power transistor, but take care of pin outs as different transistors have different pin configurations. 13005/13003 has pin (1 Base, 2 Collector, 3 Emitter)
how many ampere charger use ?
You can use minimum 1A and max 3A
Sir can I use w431 instead of TL431 #please #reply
bhai 1.2 volt nimh battery charge karne ke liye kya modification karna parega is circuit pe?
That will require a different circuit, I'll try to upload that video ASAP
MJE13005 ki jagah bc546 transistor laga sakte hai kya
Hi... Can you place a link to buy the Multimeter you use.? Thanks.
amzn.eu/d/efden02
Battery ke fix 4.2v hone chahiye tab battery 💯 percent hoti hai aagar batter main 4v honge toh 80 percent battery hogi
What if i connect two parallel battery will this work
Muy bueno 👍
Thanks for watching my friend 🙂
so this circuit autocut off battery when is full charged ?
Can we leave it overnight charging?
Can we add more batteries to this circuit?
This is put current controlled, suitable for single battery
I can use bc547 or bc557 transistor
very good
Thanks for watching 🙂
hello, why 4,08V ? 4,12-4,15 is be fine and better and secend question help me and show mi how do thi but 20,5V :(
How many 18650 batteries can be charged in parallel with this circuit and what is the max amp output of this circuit??
Which transistor used??
MJE13005 NPN Transistor, You can use any NPN Transistor, let me know which one you have?
Can it be used for charging mobile phones?
Nope, only charging battery directly
Can you give a list of parts?
The Anode is not working I don’t know why???
Try another TL431 Shut Regulator ic
@@CreativeTechos please give me an alternative for Tl 431 ❤️
What's the maximum amp output ?
400ma max output current
@@CreativeTechos You have a great creativity in yourself . But it's just a waste of time and money tp4056 would cost around like 0.25 USD .And it will give 1A output and if you modify it just by changing resistor it can give 2A output the.
Saludos una pregunta es posible hacer el mismo circuito usando el transistor 13003 ya q no cuento con el 13005.? Gracias de antemano
Pode ser com um tip 41c
The 13005 transistor is overheating when connected to the battery.
Could you redesign for Lifepo4 battery cell (3.65 Volt) Thnx.
Let me have the list of components and Diagram sir.
Am from Nigeria Africa
Thanks for your interest in this project, i have already given components list and diagram download link in description
Please Sir, what changes required to upgrade the charger to charge 8.4v lithium ion batteries?
Those dont exist?
How much is charge current?
I hope you can teach me how to make it
Can I charge 6 pcs battery?
What is the ampere of this charger?
sir you are make very well battery.charger.but sir plese lead acide battery charger make only for transistor and capacitor 4.2 volt cutoff voltage.
thanks
My pleasure,🥰
Dear can you make 4.1v 10a solar charger
it would be nice if you explain the circuit logic. great video anyway
Thanks for appreciating and watching, 🙂
Excelente
Thanks for watching my friend 🙂
Sar 4.2 volt par auto cut chiye
Charging would require 5V from source, in this circuit there will be a lot of voltage drop then how can the battery be charged ?
This circuit requires 5v dc and output voltage is dropped to 4.2 v using TL431 shunt regulator and 680R resistor, with limiting current with 47R.
It requires 4.2v to charge a 3.7v lithium batteries.
Kindly uplode 3.7x2 mean's 7.4 volt battery charger with auto cut off Circuit Diagram.
No worries, I'll try to upload asap for 2s & 3s too
I have a power supply charger for cameras, and its capacity is 12 volts - 16 amps. It has a variable resistance to raise and lower the voltage. Is it suitable for this project?
No, you actually need to use 5v 2-3A mobile charger
Bhai first transistor kon sa hai aapne value to bataye hi nhi
Any power transistor can be used, i used 13003 also small one is TL431 shunt regulator or we can say a adjustable zener diode
Appears, to be a ' comparison ' circuit; the transistor switches off, when its' voltage, is the same as the INPUT voltage....
Bro i didn't get 4.1 volts as output from it . I only gets 3.6 volts what can i do . What's the problem 😢😢 plzz..... reply plz...
Try to check transistor, or tl431 ic
Do I need to change the circuit to add 3 batteries to this circuit?
Since this is current limited circuit, you can connect 3 batteries in parallel, but it will take longer to full charge them
Esse sircuito proteje a bateria
Buenos días hice los dos tipos de cargador de batería 12v que aparecen en los vídeos pero ninguno marca cuando la batería está cargada alguna solución o que hice mal ?
Circuit Diagram ?
sir, is it possible to use the TIP41c transistor?
ਤੁਸੀ ਟਰਾਂਜਿਸਟਰ ਦਾ ਨੰਬਰਨਹੀ ਦਸਿਆ ਵੀਡੀਓ ਕਲੀਅਰ ਬਣਾਇਆ ਕਰੋ ਜੀ
Same circuit 6v battery auto cut off please request
Please give me the answer request
Follow the Video not schematic diagram, it's a little bit confusing, in video LED common pin to 470 ohms to 431 pin 1, in diagram it varies
Bhai main tumko like bhi kya Aisa stripe bhi Kiya comment bhi kiya hai aur vah ghanta bhi daba Diya
Hola amigo 👋
Hey hi, nice to see you here 🥰
Por favor amigo 🙏🙏
👍👍👍👍👍👍
Thanks for watching 🙂
just use a TP4056
Just 25cent in price
Please frist transister no. in written
Part list & Circuit Diagram check in video description.
@@CreativeTechos The first element is not a transistor. İt is a TL431 programmable voltage regulator.
The bc547 looking/sized, TO-92 is TL431 Adjustable zener, or original called voltage shunt regulator.
Its not cut off
Сегналезирует что зарядил я но не отключает
This's cathode led
First view
Thankyou so much for watching 🙂
👑👑👑👑👑🎶🎶🎶🎶🎶
Thanks for watching my friend 🙂
TRANSITOR HAI YA MOSFET VIDEO ME DIKHATE HO MAGAR DIKH NAHI PATA ES LIYE SCREEN PAR BAJU ME ALAG SE JO BHI COMPONENT LAGATE HO SCREEN PAR DIKHANA CHAHIYE VARNA AAP KE VIDEO DEKHNE VALE KO KYA FAIDA
it take so long to charge battery, not useful at all, i will prefer to use charger for lithium battery from company made.
बडा वाला Tragister का क्या नम्बर है बताया नहीं गया है फेक विडियो.
Bekar Circuit
Use Lm358 in place of Lm431
I thing so This channel maybe fake because i can make more circuit but this channel showing is wrong info only this channel circuit not working i can try many time but result is not working so guys plzz avoid this channel video and save your time and money