Hello from Atlanta Georgia well I've been following you for years I remember when you were young man I just noticed that you got a little bit older but that's cool because you're smart I love your presentation you do a great job for white metal detectors you really know your stuff thanks for sharing this video I'm real interested in that unit thank you
Hmm... I just bought a new Treasure Pro, but I cannot do what you say you can at 33 Seconds into the video. Hold the TRack button and pump coil for manual ground balancing?? NO way, on my unit. The Track button only locks and unlocks the ground balancing tracking. If I press and hold the Track button it does nothing else, but lock the tracking, and when released and pressed in again and HELD, it unlocks it (puts it back in tracking mode). How to heck are you able to press and hold the track button and pump you coil to manually balance???? Is my unit one of the first to be manufactured, and the software release on the TPro does not allow for manual balancing?? Can you clarify what you had posted on the video at :33 seconds into it??? I'd love to hear more about it, as this option definitely does not work as described by you in the video..... Hmm.....
Martin - thanks for letting us know about this, we will change the video to clarify. The correct process is to pump the coil in TRACKING mode, then push LOCK to freeze the ground balance point.
I've dealt with WHITES Electronics a few different times and their Customer Service was great without Exception - Based upon that, I decided to purchase a TreasurePro.. - ( :
i purchased a White's Treasure Pro off Amazon and i think i might have to send it in for repair. the target ID is always off, if i do an air test a nickel will show up as a quarter, and a quarter will show up as a half dollar, etc... for the year i have owned it i've yet to dig what it says is in the ground. i know from viewing other videos that this machine can be reliable at accurately IDing a target at least compared to mine. what could be the cause of this? ill end up with a repair cost on top of the price of the machine itself, if i would have known this i would of went with a different machine.
+White's Electronics, Inc. thank you. Is there a coil you would recommend for high trash areas that will work with the Tpro? I just purchased the Tpro after watching all your videos just concerned about the size of the coil and trashy areas. thanks
All of the Prizm coils will work with the TPro. This is the tiniest one we have, might be too small for your needs but worth a shot- www.whiteselectronics.com/prizm-mini-dd
I'm in market for my first upgrade. Would you say that biggest difference between this model and MX Sport would be Waterproof, tones, and Coil? Still new to hobby and trying to find best/cost efficient upgrade I can get...Thanks!
+Dirk Ayala Well, as far as performance both machines will do you right. The MX sport goes deeper than the TPro, but both have good recovery speed. Since it's higher-frequency, the MX Sport will find smaller targets (especially gold).The options are where the MX Sport has a huge edge. It can "do more"- more discrimination, more audio options, more programs, and you can tweak it to suit your needs more than the TPro. It's also waterproof. BUT, it's about double the price. Either machine is a great choice, it's really up to your budget and how much horsepower you need.
I would like to see an updated video on the treasure pro
Hello from Atlanta Georgia well I've been following you for years I remember when you were young man I just noticed that you got a little bit older but that's cool because you're smart I love your presentation you do a great job for white metal detectors you really know your stuff thanks for sharing this video I'm real interested in that unit thank you
Excelente detector Treasure Pro.
Hmm... I just bought a new Treasure Pro, but I cannot do what you say you can at 33 Seconds into the video. Hold the TRack button and pump coil for manual ground balancing?? NO way, on my unit. The Track button only locks and unlocks the ground balancing tracking. If I press and hold the Track button it does nothing else, but lock the tracking, and when released and pressed in again and HELD, it unlocks it (puts it back in tracking mode). How to heck are you able to press and hold the track button and pump you coil to manually balance???? Is my unit one of the first to be manufactured, and the software release on the TPro does not allow for manual balancing?? Can you clarify what you had posted on the video at :33 seconds into it??? I'd love to hear more about it, as this option definitely does not work as described by you in the video..... Hmm.....
Martin - thanks for letting us know about this, we will change the video to clarify. The correct process is to pump the coil in TRACKING mode, then push LOCK to freeze the ground balance point.
Ahhh, that would explain it. Thank you very much for that clarification. I appreciate your quick reply. Wonderful machine. I love my Treasure Pro.
I've dealt with WHITES Electronics a few different times and their Customer Service was great without Exception
-
Based upon that, I decided to purchase a TreasurePro..
-
( :
i purchased a White's Treasure Pro off Amazon and i think i might have to send it in for repair. the target ID is always off, if i do an air test a nickel will show up as a quarter, and a quarter will show up as a half dollar, etc... for the year i have owned it i've yet to dig what it says is in the ground. i know from viewing other videos that this machine can be reliable at accurately IDing a target at least compared to mine. what could be the cause of this?
ill end up with a repair cost on top of the price of the machine itself, if i would have known this i would of went with a different machine.
in the beginning of the video you mention pumping the coil to ground balance I thought this detector had auto ground balancing. Am I mistaken?
It's a common way to speed up the auto ground balance process.
+White's Electronics, Inc. thank you. Is there a coil you would recommend for high trash areas that will work with the Tpro? I just purchased the Tpro after watching all your videos just concerned about the size of the coil and trashy areas. thanks
All of the Prizm coils will work with the TPro. This is the tiniest one we have, might be too small for your needs but worth a shot- www.whiteselectronics.com/prizm-mini-dd
I'm in market for my first upgrade. Would you say that biggest difference between this model and MX Sport would be Waterproof, tones, and Coil? Still new to hobby and trying to find best/cost efficient upgrade I can get...Thanks!
+Dirk Ayala Well, as far as performance both machines will do you right. The MX sport goes deeper than the TPro, but both have good recovery speed. Since it's higher-frequency, the MX Sport will find smaller targets (especially gold).The options are where the MX Sport has a huge edge. It can "do more"- more discrimination, more audio options, more programs, and you can tweak it to suit your needs more than the TPro. It's also waterproof. BUT, it's about double the price. Either machine is a great choice, it's really up to your budget and how much horsepower you need.
Very Cool-Thanks!
Thank you sooo much for a great lesson,,,
Thank you I didn't know how to turn the damn thing on now I do
Hi I am from India ..I have treser pro sensetevety 6 or 8 detecter say overload way ?
More than likely iron in the ground or it's too much for where you are detecting. try 5.
Estos gringos nunca hacen pruebas en tierra para no quedar mal