ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Black smoke solution! Laser welding settings that only a few know about
ฝัง
- เผยแพร่เมื่อ 17 ส.ค. 2024
- For information on welders and peripheral devices, please contact the manufacturer to receive a more accurate answer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
In order to correctly output the electricity input to the laser welder, correct laser spacing control is required.
If the gap adjustment is poor, the output may be reduced or black smoke may appear.
I know that it can also be a problem when the laser interval is too long or too short.
If you have problems with laser welding, it wouldn't be a bad idea to try various spacing adjustments.
And sometimes, you may need to use these settings in reverse.
I will introduce those as well later.
Thank you for watching and have a great week.
#laser
#problem
#solution
#welding
#test
#factory
#machine
#steel
#crafts
#Tips
#secret
#trick
#amazing
#DIY
#idea
#future
#technology
#technique
#pipe
#HAGOJIBI
#video
welding machine
#Laserweldingmachine
#laserwelder
여러분 안녕하세요.
레이저용접기에 입력된 전기를 올바르게 출력하기 위해서는 올바른 레이저 간격 조절이 필요합니다.
간격조절이 나쁘다면 출력이 줄어들거나 또는 검은 연기가 발생하는 경우가 있습니다.
레이저 간격이 너무 길거나 너무 짧을때에도 문제가 된다고 알고 있습니다.
레이저용접 작업에 문제가 있다면 다양한 간격조절을 시도해보는것도 나쁘지 않을 겁니다.
그리고 가끔은 이런 설정들을 반대로 이용해야 되는경우도 있을겁니다.
그런것들도 차후에 소개시켜드리도록 하겠습니다.
시청해주셔서 감사합니다 그리고 즐거운 한주 보내세요.
용접기 및 주변기기에 대한 내용은 제조사에 문의 하시면 더 정확한 답변을 얻으실수 있습니다.
↓↓↓↓↓↓↓
korea@nswel.com
내쇼날시스템 대표전화
051-941-9701~2
Thank you
very useful content
make more videos on laser welding machine your only the person in TH-cam uploading laser welding techniques 👍
Thank you so much . I enjoy all your demonstrations. Despite the fact that you do not speak, your message is always clear. I hope to be able to obtain a laser welder in the not too distant future. My confidence and continued interest in this method stems directly from you . Thank you.
Super thank you man😮
EXCELENTE VIDEO¡¡... Y MUY FACIL DE ENTENDER¡¡...SALUDOS DESDE MEXICO¡¡
Muito bom seus vídeos
I miss your Korean comments.
"Pram-param-sssamidA!"
Boa tarde meu amigo,eu não estou conseguindo fazer a luz branca do Laíse ,só sai a vermelha
Super solution.
Merci
Спасибо! Очень наглядно!))
Aí sim mestre valeu mais uma bela apresentação de como regular a tocha a laiser para definir um bom resultado na soldagem 🇧🇷🙏
Варил сваркой лазером, что я могу сказать, это только стационарно если какая-нибудь мелочь всё это очень окуратно..
Всем привет кто может подсказать по сиз для органов зрения работал лазерной сваркой 3 дня первый день работал в очках которые шли с апаратом загорело лицо от оражавсегося излучения от свариваемой детали на второй день попробовал работать в маске хамелионе к концу второго дня начали болеть глаза.
Особенность изготавливаемого изделия такова что нужно постоянно следить за сплавлением кромок- внешний угловой шов.
Что можно решить по сиз,кто может подказать что то дельное?
Есть здесь опытные сварщики работающие на лазере ?
Я так понял что при лазерной сварке идет инфракрасное излучение а при электродуговой ультрафиолетовое, поэтому сиз предназначенное для электродуговой на лазер не подходит.
Тебя спасёт сварочная маска, плюс очки от ЛИ
Ролик для людей которые ничего не понимают в лазерной сварке! Врубил расход газа несколько Бар и у него всё сдувает)) Расфокус +13мм., что он сможет сварить на такой плотности мощности если у тебя не источник в 10 кВт !??))
Спасибо
Merci, excellente video tres utile et explicite
The welding results are very beautiful
스텐말고 EGI 철판으로 그을음 안나는것도 보여 주실수 있나요~
I bought this welding machine
But I'm having problems with penetration, the weld is easily broken
Can you assist me?
What are you trying to weld and what settings have given you the best results? Sometimes it’s not lack of heat and it’s possible you’re just going too fast. Also the wobble length.. try doing a narrower weld and slowing down. A second option would be to decrease the wobble frequency(Hz). If all fails then I would try more heat.
@@Freddy-st5ty Thank you
I weld 316l stainless steel
My problem is exactly what you brought up, I'm going too fast.
Thank you again
This is incorrect... It's not measured from the body of the pistol. It should be measured from the focal lens.
Depending on which focal length the actual focus lens is set.
Also depending if there are extra focal lenses inside the pistol.
If the focus is not set correctly, you will have more problems than just black smoke!
Manufacturers (copycats) have been making these wrong from the beginning, with the best intentions, the practical side was not accurate.
I have been discussing this very item with my contacts at the laser manufacturing company about a year and half ago.
And still have documentation about this. (ofcourse not available for public)
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥👍👍👍👍👍👍👍👍👍👍👍👍👍
저번에 댓글로 문의했던 걸 영상으로 만들어주셨네요. 감사합니다 ㅎㅎ 레이저용접이 대중화가 안돼있고 가격이 비싸서 함부로 만지기가 무서운데... 잔고장이 어떤 게 있는지 어떻게 대처하는지 만들어주시면 더 감사할 거 같습니다. Co2랑 비슷한 구조처럼 보여서요...
Поясни що ти робив