Big B is a virtual fountain of rc knowledge, sparking proudly for all to bathe in here on you tube!!🎉 seriously bro you deliver good knowledge in a very relatable and entertaining way. That is a rare combo. Go boatgang go boatgang go!
I must say, your videos are becoming more helpful and informative every day, especially for those new to the hobby. If I were Big King B for a day, I would use a prop blast water pickup that mounted somewhere on the existing hardware, so the only modification you would need to make is the through-hull for the tubing. That way, you could remove it with no patching required if it did not help.
Good informational stuff. On key with ovals and it’s a completely different set up to Saw. Especially trying for ovals full pack running near or at 70 mph. Keep it going. Love seeing your channel grow and give back to the community
Hi, nice craft. I just bought a NTN600 green as the gecko 😅. You have some amazing videos, but have you done a video on a stock boat and what to do first, like in car where you have, step one, step two and so one.. I meant a guide what to do first and what to put your money on. Regards from Sweden 😊
great video big b,i learn so much from you, props are still confusing for me,im on a budget and i buy off brand props, a couple of them work really good on my 24,the problem is they don't have any numbers on them so i don't know what im running,lol have a good one brother
Good runs, good vid B! You have any vids putting in a thru hull pick up? Cant seem to find one anywhere. Due to the boat and setup Im really limited options, so I have 4 singles coming. Thinking about drilling a smaller hole and filing to size and shape. That seem about right?
That's what I did to my scale fishing boat, I drilled a hole & filled to fit, then epoxies into the boat. It's easier than you think hardest part is getting up the nerve to drill a hole in a perfectly good boat...
lost my oxidean 4519 the blue one. lost it less then 5 feet from shore after a full run lucky it wasn't way out, any way I waded out but couldnt find from all the aquatic plants. bummed shaft is fine nut backed off I recon. boat build day.peace
I watched your balancing of propellers. The metal Proboat propellers are they pre balanced? I’m tired of braking the plastic ones especially with the updated motors I put in my boats. Of course it doesn’t help to run in the fall with all the leaves falling into the lake. By the way Rhinelander Wisconsin where I live is going down to 31 degrees tonight.
31° wow it's mid 70's at night here in the Carolina's right now. Yes sir proboat props are 99% balanced, you shouldn't need to balance them stainless steel props so you shouldn't break them. Oxidean & ose sells cnc aluminum balanced props also.
One last question, I’m going to buy another propeller shaft and I have stowed my boats away for our trip to Florida. Do our Proboats turn clockwise or counterclockwise? Thanks in advance for your help.
Can you make a video with the sonic also please thinking on getting one but just want to bash it but I' do like power an speed thank you for your vids thumbs up my utube friend
What would cause my transmitter to loose signal from the receiver? Ran at the pond yesterday and on my last run my boat was dead. Brought it back and saw the light blinking on the receiver so I did a re bind and then it seemed good.
Big B is a virtual fountain of rc knowledge, sparking proudly for all to bathe in here on you tube!!🎉 seriously bro you deliver good knowledge in a very relatable and entertaining way. That is a rare combo. Go boatgang go boatgang go!
I must say, your videos are becoming more helpful and informative every day, especially for those new to the hobby. If I were Big King B for a day, I would use a prop blast water pickup that mounted somewhere on the existing hardware, so the only modification you would need to make is the through-hull for the tubing. That way, you could remove it with no patching required if it did not help.
Probably add a pickup on the stinger mounting holes,
Good informational stuff. On key with ovals and it’s a completely different set up to Saw. Especially trying for ovals full pack running near or at 70 mph. Keep it going. Love seeing your channel grow and give back to the community
That was cool! No broken props either! 👍
😆 😆
Awesome video Big B. Keep up the great content!
Very Informative video. Great run.
Hi, nice craft. I just bought a NTN600 green as the gecko 😅. You have some amazing videos, but have you done a video on a stock boat and what to do first, like in car where you have, step one, step two and so one.. I meant a guide what to do first and what to put your money on. Regards from Sweden 😊
My Recoil V1 worked great and oh so fast on 6s. Seems it was almost running out of water, over reved in the last 10% of the throttle. Way cool.
Big B you should put a small spot of velcro on your battery's on the bottom so the don't migrate during operation 😉.
great video big b,i learn so much from you, props are still confusing for me,im on a budget and i buy off brand props, a couple of them work really good on my 24,the problem is they don't have any numbers on them so i don't know what im running,lol have a good one brother
Another great video B. Just wondering, at one point I think you said the LVC was 4.8?? I can only see lower numbers on my program box.
3.8 v is my cut off I must of overlooked that in the editing sorry
Good runs, good vid B! You have any vids putting in a thru hull pick up? Cant seem to find one anywhere. Due to the boat and setup Im really limited options, so I have 4 singles coming. Thinking about drilling a smaller hole and filing to size and shape. That seem about right?
That's what I did to my scale fishing boat, I drilled a hole & filled to fit, then epoxies into the boat. It's easier than you think hardest part is getting up the nerve to drill a hole in a perfectly good boat...
@@IRONCLADRC Yea, not looking forward to making those first holes. The wait for the parts aint helping lmao
lost my oxidean 4519 the blue one. lost it less then 5 feet from shore after a full run lucky it wasn't way out, any way I waded out but couldnt find from all the aquatic plants. bummed shaft is fine nut backed off I recon. boat build day.peace
I feel your pain I lost an abc 1817 last week my fastest prop on the blackjack 42
I watched your balancing of propellers. The metal Proboat propellers are they pre balanced? I’m tired of braking the plastic ones especially with the updated motors I put in my boats. Of course it doesn’t help to run in the fall with all the leaves falling into the lake. By the way Rhinelander Wisconsin where I live is going down to 31 degrees tonight.
31° wow it's mid 70's at night here in the Carolina's right now. Yes sir proboat props are 99% balanced, you shouldn't need to balance them stainless steel props so you shouldn't break them. Oxidean & ose sells cnc aluminum balanced props also.
One last question, I’m going to buy another propeller shaft and I have stowed my boats away for our trip to Florida. Do our Proboats turn clockwise or counterclockwise? Thanks in advance for your help.
oxidean 4814 is good and fast on my impulse32 and the swv2 seems to like the blackjack 42 prop at least with my set up. peace
4814 is a beast
Can you make a video with the sonic also please thinking on getting one but just want to bash it but I' do like power an speed thank you for your vids thumbs up my utube friend
Sonicwake videos coming soon
What would cause my transmitter to loose signal from the receiver? Ran at the pond yesterday and on my last run my boat was dead. Brought it back and saw the light blinking on the receiver so I did a re bind and then it seemed good.
I had the same Issues last week? Not sure what was going on with mine?
SMOKIN
How do you know if the prop you’re running is too small?
Usually, you'll experience cavitation. Basically, your boat doesn't get up on plan, or your prop catches and you have a lower speed that you want
@@IRONCLADRC Good to know, thank you!