As a man who A) has never operated a welder, B) who wants to learn welding, and C) is fascinated by welding, your channel is one of my favorites. Your presentation is excellent. Cheers from Hillsdale, Kansas (Kansas City).
As a welder for over twenty years I think this is good info, keep it up, I see some guys laughing at the idea of having scissors etc in their tool box. I always do , very usefull when making paper templates , duh.😊😊
Could you not just put the pipe up against the end and draw round it onto the pipe? Or measure the angles of the piece you are attaching to and mark them onto the pipe?
Yes he could have, and that's why as a 30 year weld vet I do not approve of this method. Sure it does the job. But in a shop environment there are a few faster ways. One of witch you described
If your pipe is a conduit for a media , learning pipe layout like tees, elbows, and cones etc is very handy. I would use my "Curvo Mark" wrap around and my contour marker. If making a truncated cone of a big dia from round to square the layout is a bit more involved, but doing the piece in sections many times is the only way. Just remember that if one man can do it so can another.
Un bricoleur du dimanche après-midi Quo mais des gants 🧤 pour faire un mini bricolage comme sa 😢😢un chat qui mais des gants 🧤 quant il vas a la chasse il rentre bredouille 😂😂😂😂😂
i'd get fired if i would take that long to cut a pipe. it's kinda neat but takes to long. butt it, mark it, cut and weld. if it looks like garbage when ur done, ur just a shitty fabricator.
I love it. I said the same shit when I saw it. I thought. Um...ok...to each his own. The people that don't know any better I imagine it looks amazing. 😅😂
As a man who A) has never operated a welder, B) who wants to learn welding, and C) is fascinated by welding, your channel is one of my favorites. Your presentation is excellent.
Cheers from Hillsdale, Kansas (Kansas City).
@@isthatbikedieselmate Neither am I.
And no, I’m not. 👍🏻
I knew this was going to be good when I seen the rubber gloves!!
Thank you for sharing some wonderful techniques
As a welder for over twenty years I think this is good info, keep it up, I see some guys laughing at the idea of having scissors etc in their tool box. I always do , very usefull when making paper templates , duh.😊😊
Paper - old school 👍
Dude! That was actually very educating. Thank you so much for sharing this kind of experience.
Aloha
Годная работа! Спасибо!👍👏👏👏
Excelente metodo
Love your videos dude thanks for making this. Keep doing
That was awesome 👍😎
I’ll use this all the time. Thanks
Bonjour,
Petit soudeur de formation, Monteur-soudeur sur le tas je vous remercie c'est très intéressant et instructif ^^
😍😍😍👏👏👏👍👍👍
Awesome ❤
Super👍🏻
What type of paper are you using... 😁😁😁!!
Thanks for sharing bro!
Здравствуйте , благодарю.
Браво!
Thank you
Could you not just put the pipe up against the end and draw round it onto the pipe? Or measure the angles of the piece you are attaching to and mark them onto the pipe?
Yes he could have, and that's why as a 30 year weld vet I do not approve of this method. Sure it does the job. But in a shop environment there are a few faster ways. One of witch you described
@@stretchhfab7315Who asked for your approval?
天才！
Начерталка в действии.
Спасибо 💓 Автор за практику в начертальной геометрии
Булатный лайк мой👍
Zabardast well
Awesome
If your pipe is a conduit for a media , learning pipe layout like tees, elbows, and cones etc is very handy. I would use my "Curvo Mark" wrap around and my contour marker. If making a truncated cone of a big dia from round to square the layout is a bit more involved, but doing the piece in sections many times is the only way. Just remember that if one man can do it so can another.
thanks
They don't discuss it because there are a plethora of other ways to do it that don't take more than 30 seconds
Please share.
Yes, Called T&E, Trial & Error. Leads to a lot of scrap pieces left over that cost you money on a job,
Sungguh luar biasa
Make sure you remember where you put these templates at because they will be handy in the future. "Welding machine"
So pelo barrulho da lixadeira da p ver que ja ta nas últimas kkk
What? that's too smart!! just use a dozen rods and weld 20 pieces of scrap!! it'll hold a kleenex box👍🏼
I don't think I ever welded a pipe onto an angle iron.
👍👍👍
Wearing gloves with holes in them is rather pointless.
Как все сложно. У нас сварщик на большом токе "сдувал" с трубы лишнее и потом привариварил
Un bricoleur du dimanche après-midi Quo mais des gants 🧤 pour faire un mini bricolage comme sa 😢😢un chat qui mais des gants 🧤 quant il vas a la chasse il rentre bredouille 😂😂😂😂😂
First day on the job I see😂
Had to go check for sure... Yup, no scissors in my tool box.
Why not?
👍
Paper is cheaper than metal:)
Kreatif
El Hummer ev aunque pierda me gusta mas que la caja de zapatos para mujer
처음 자른 걸 옆으로 돌려서 앵글 안으로 붙이면...
mejor impocible
25mm cut
Profesional ok
"Round pipe metal" huh
That’s because this isn’t how welders do it 👎
😊
why did you decide to give yourself zinc poisoning?
Don't know a single welder that would go to all that bother
A lot of work and an incomplete job....
Ohhay
Quá mất việc
i'd get fired if i would take that long to cut a pipe. it's kinda neat but takes to long. butt it, mark it, cut and weld. if it looks like garbage when ur done, ur just a shitty fabricator.
I love it. I said the same shit when I saw it. I thought. Um...ok...to each his own. The people that don't know any better I imagine it looks amazing. 😅😂
Welders rarely discuss it cos it’s bs
Are pagal admi engal pass rakh kr marking kr leta time west kiya
I see a thumb!
少しは開先切るでしょう！薄物なら良いけど？これも簡単な現場での事ですが図面でも起こせますよ簡単にて設計してる者なら！中肉以上なら隅肉溶接が原則ですからね６mm換算ですよね