quick question: How high are your walls? and what is the ceiling height? I am thinking the ceiling is open, so even if the walls are 9 ft, there would be clearance in the ceiling for the lift. I'm planning to pull the trigger on a 20 x 26 2-car garage/steel A-frame building. I want to install a 2-post car lift that requires a 12ft ceiling. Can I get away with a 9 foot wall or do I have to go with a 10- or 12-foot wall option?
12' in the corners. Overall probably 14'-15' in the middle. I'd just check with the manufacturer of the lift. Also depends on the kind of cars you're working on. The ones I like are small. It would easily have fit with a smaller height.
Man I'm so happy for you a honda dream come true ! Your. A great inspiration to me and others .. I'm building my crx right. Now cant wait to drive it .. thank you
Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.
I had 3 CRXs a 87 a 90 si and 91si ... got into American 💪 after that.. Now I have a built up 95 Trans Am with a 98-02 front end swap and did a 24x conversion so no more opti spark and obd1.5 now it's OBD2 and can be tuned with HP tuners... I'm in the process now of doing what you did to my 30x50x14 metal building great video!!
Wow! What a difference that made . I didn't think about the dust and dirt getting into the cracks. That should also help with noise if you had problems with metal rubbing together with wind. Well worth the time and money in my opinion. Gotta keep you babies clean. I always look forward to your vids.
Awesome garage! Pretty cool crx's. Just found your channel today and I've been binge watching your vids. Made me appreciate Honda's on another level 😀😎. Currently driving my beloved integra and planning to get a crv/civic in the near future! Honda ❤
Woah, just bumped into your channel to check out spray foam and saw you have CRX's. I had an 88 CRX Si brand new and sold it after 10 years with over 120k miles. I loved that car.
Lowe’s has garage door foam board R4 rating helps insulate, provide sound barrier, and prevent condensation. Will help maintain Garage temperatures especially in the summer. Boards are 0.78” thick 8’x4’ Use Liquid Nails for easy application
Wow my dream garage with all the EF goodness can’t say much more but...Wow!!! Grats man you have come a long way all respect from San Bernardino California. And by the way thanks for inspiring doing DIY on my EG 👍🏼👍🏼👍🏼
I’m sure it definitely helped a ton sealing it but it’s going to get dusty just having the doors open I’m guessing. It’s looking so nice, time for a lift.
Just trying to get answer to my transmission /.clutch replacement. Anyways, removed the transmission to change the worn input shaft bearing, replaced clutch, throwout bearing/spring, flywheel, rear main oil seal. Put everything back, tried to start it but it's revving trying to turn over and there's this sound like something hitting a plastic container or something. It only happens after the engine is trying to crank up. Then, boom, not too low but sounds like hitting a plastic container as I am sitting inside my car. Battery is brand new. Adjusted the clutch cable per ErictheCarGuy. Followed your transmission removal video as a guide. Thanks for your help.
@@GarageBuiltHondas Thanks for the quick reply. More questions, if you don't mind. When you say check starter, meaning take it out and check it? How? The same question to the flywheel cover plate. Again, appreciate your help.
@@ekneegoaler7717 you can apply power to it out of the car and see if it kicks the rod out. Remove the flywheel inspection plate and just see if you can hear or see anything. Also make sure its tightened completely.
I'm fortunate with floor space in my garage. So what made it much easier for me to move my cars around with ease was some car/wheel dollys under each wheel. Full 360 control. Harbor Freight.
Man, you're giving me some major garage envy. I was researching on getting a 24 x 24 steel building to work on my civics, but now I'm thinking of pulling out from my retirement to get a setup like yours. lol. I think my 5 EG civics 1 FJ & del sol deserve a home like yours. I could only dream. :-)
Man, all I can say is build big enough for what you're happy with. When building my garage I had 4 cars. It quickly spiraled out of control having the extra room but I'm happy. Next is a couple 4 post lifts to stack a couple cars and keep one bay just to work on something.
@@GarageBuiltHondas I just gotta convince my better half :-) btw, awesome updates on the garage build from flooring to sealing the joints. Learning a lot. I'm sure I can learn even more from your actual car vids. following.
Keep up the good work! If I may, I have a recommendation for your work space. Listening (not watching) your videos, I notice a lot of echo, slap back noise in the garage. It might be on your “to do” list all ready, but if you could do some acoustic treatment, you’ll reduce a lot of ear fatigue. When the air gun, air hammer and even the normal use of the air compressor gets going, it could really be annoying. In my garage, with inside metal walls, the top 4 feet are stippled with holes that soak up some annoying frequencies. I’ve also hung banners, all over, similar to what you have on the upper back wall, which help a lot! Just some thoughts with the goal of only wanting to be of help...enjoy the new garage! Rob
love the garage and what it has become. all those Efs there. priceless. i just got a 88crx (non si) in Oct. but unfortunately live in Cali so swaps or high hp will have to wait lol. Jon, due you plan on getting an EG or EK in the future? i'm curious how you would build one. my taste in mods are similar to yours XD simple but efficient mods. i do plan on going all out in interior on the CRX, prob put some gaming references since i'm a gamer too. Keep up the great work and looking forward to the next vid!
Thanks, I appreciate the love and support!! EK? Just bought one last week. It's a sedan and supposed to be a 2nd daily, but it might just be a flip so we'll see. I really like it, needs a new water pump but that's a pretty easy job so we might see a DIY on that setup. I was huge into Halo 1-2 and then GOW1-2-3 where I was a beast in Annex. I gave up gaming 4 years ago when I wanted to devote more time to making videos and doing car stuff. I'll get a huge urge to play though sometimes, I miss the gnasher from GOW. Those shottie battles were so fun to me.
@@GarageBuiltHondas dude! Im a huge halo fan, grew up with that. Now i mainly play leauge of legends. But my close friends are big GOW players. Im thinking of putting some game related carpet on the back of the crx. Since im missing some interior prices. Cut out a board to flatten out the entire back. And knit something on it. Idk yet.
I like your shop man it’s nice and you have a nice collection of efs in there! I would be in there all day. And that’s good to keep all the dirt coming in. That would bother me as well
Great work! Do you get any condensation build up on the roof since sealing everything up? I've been considering sealing my garage up also. I just don't want the condensation to be an issue. I live in SC where it gets super humid. Thanks in advance!
Finally got my 90 crx sorted out, but now the only problem I have is the race header and the O2 sensor potions on it. I can fit my O2 because of my fan shroud is in the way. But wanted to know if you have race headers on any of your single cams, if you had the same problem I had, and what brand headers you might suggest for single cams?!?!??
Off subject of the video but i have a 2013 civic coupe non si ex i believe and want to drop it but not sure if skunk2 will fit? Any information of what part number will fit my car would be helpful thanks for your time 👍
April 2019. Been working on it here and there. I've recorded any footage but haven't pieced together the videos yet. Hoping to get it running this year and have some fun with it.
Hey, I recently put an intake manifold from an SI on my non-vtec sohc zc and everything plugged up perfect. I have a 4/2/1 exhausted manifold on my car, but my fan is in the way for the O2 sensor. So what I did was rout the O2 to the secondary location of the exhaust. But driving it for about 30min a check engine light came on and was wondering if it could be me routing the O2 sensor on the bottom end of my exhaust. My ecu is flashing what I want to believe is a code 1, but it's so damn hard to read the codes to know what it really is.
Relocation shouldn't affect an obd0 o2 sensor. I've done it many times to the position right before the catalytic converter. Recheck your wiring, and maybe even the o2 sensor isn't working now.
@@GarageBuiltHondas okay, I'll definitely check wiring and check the o2 sensor. Also when you rerouted your o2 did you have to extend any of the wires?
I'm having one of these types of buildings put up soon and will probably be doing something similar. In hind sight, would you say it would be worth it to buy one of the battery powered caulk guns?
I didn't need it. I only used caulking on the floor joints and it didn't take long. I don't use caulking often so for me it was inexpensive to use the cheap $5 guns from Lowe's.
Garage Built Hondas cool thanks. Last question I swear. Do you wish you had opted for the bubble wrap insulation stuff? I ordered mine with the insulation on the roof only. Thinking about having them do the whole thing. Also, 7:02 reeeee I’m offended! Jk.
I didn't do the insulation just to save on money when I was building it. After experience almost 1 year in it, I definitely think it would've helped during the summer to keep it cooler. I may try to insulate the roof eventually.
@@GarageBuiltHondas they have to come down on the price first lol I paid $1,000 for my first one and she was in amazing shape. She's my daily now, running great! For the right price I couldn't say no hahaha
@@GarageBuiltHondas hey Jon I have a question. I recently changed my injectors on my dpfi D15 and I noticed that when I put the car in reverse it shakes like a low rumble. I recently checked my codes nothing is showing. Could this be related to the injectors? It runs fine doesn't do it any other time, only in reverse.
You should have sealed it the day they built it? Big fan but com'on man lol that's shed/garage 101. You're going to get hornet or bees nests some day and that will be why, no seal. Only openings should be controlled - Meshed vents or filtered vents that can be cleaned or replaced easily. Gluck
Life didn't work out that way. We had a baby the next day after electrical was finished back on October 8th and with work/life I don't have frequent time to be outside more than 1 day a week if I'm lucky. I had plans of how I wanted to finish it but have never owned a structure of this magnitude and therefore was unaware of the gaps/openings. It's fixed now, shouldn't pose much of a problem in the future either.
@@GarageBuiltHondas It had issues with the distributer where the spark plugs connect and left it there since 2012. A Fedex delivery driver female was offering $1000.00 as is but I know that restorers would love to get their hands on it.
I remember these cars brand new in the late 80s and early 90s and thought these cars were ahead of it's time. Surprised Honda discontinued the CRX model.
@@GarageBuiltHondas I was mostly joking about the flex seal but who knows iv'e never used the product, i think you did a good choice here. Thanks for all the content you make.
It's been over 3 weeks and the garage has been so much cleaner!
Now throw some 2*4's in there with insulation and drywall and it'll be 100% better
quick question: How high are your walls? and what is the ceiling height? I am thinking the ceiling is open, so even if the walls are 9 ft, there would be clearance in the ceiling for the lift. I'm planning to pull the trigger on a 20 x 26 2-car garage/steel A-frame building. I want to install a 2-post car lift that requires a 12ft ceiling. Can I get away with a 9 foot wall or do I have to go with a 10- or 12-foot wall option?
12' in the corners. Overall probably 14'-15' in the middle. I'd just check with the manufacturer of the lift. Also depends on the kind of cars you're working on. The ones I like are small. It would easily have fit with a smaller height.
@@GarageBuiltHondas This helps a great deal. Thanks so much for the info. I also like working my 5 EG hondas :-)
Man I'm so happy for you a honda dream come true ! Your. A great inspiration to me and others .. I'm building my crx right. Now cant wait to drive it .. thank you
When my dream comes true through someone else... salute!
Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.
I had 3 CRXs a 87 a 90 si and 91si ... got into American 💪 after that.. Now I have a built up 95 Trans Am with a 98-02 front end swap and did a 24x conversion so no more opti spark and obd1.5 now it's OBD2 and can be tuned with HP tuners... I'm in the process now of doing what you did to my 30x50x14 metal building great video!!
Congratulations on the new building! So happy to see your channel growing!! Rooting for you, bro!
I wouldn't have even considered that being a problem with a steel structure. Awesome fix! Curious to see how the shop does in the summer down there
I'll keep you all updated on that!
So much room and super clean straight pro looking spot, I can see a Dyno up in there too! 😁
It's so cool seeing 5 classic Honda's in there! Nice garage!
Thank you
Wow! What a difference that made . I didn't think about the dust and dirt getting into the cracks. That should also help with noise if you had problems with metal rubbing together with wind. Well worth the time and money in my opinion. Gotta keep you babies clean. I always look forward to your vids.
Man.....you have some of the cleanest ef collections I've ever seen.you truly are a lucky bastard lol.
Awesome garage! Pretty cool crx's. Just found your channel today and I've been binge watching your vids. Made me appreciate Honda's on another level 😀😎. Currently driving my beloved integra and planning to get a crv/civic in the near future! Honda ❤
Glad you're here! These cars are fantastic, I love em, so much fun for me.
Woah, just bumped into your channel to check out spray foam and saw you have CRX's. I had an 88 CRX Si brand new and sold it after 10 years with over 120k miles. I loved that car.
That's rad!
I love them still. Old man who can't get away from old Hondas. 😁
Lowe’s has garage door foam board R4 rating helps insulate, provide sound barrier, and prevent condensation. Will help maintain Garage temperatures especially in the summer.
Boards are 0.78” thick 8’x4’
Use Liquid Nails for easy application
Wow my dream garage with all the EF goodness can’t say much more but...Wow!!! Grats man you have come a long way all respect from San Bernardino California. And by the way thanks for inspiring doing DIY on my EG 👍🏼👍🏼👍🏼
As always love the content forget to comment on the Civic detail I know the camera doesn't do it justice your friend did a great job
Great work as always! I say leave the foam the way it is. It obviously serves a purpose and is working well just the way it is.
Agreed. I haven't touched it since.
I’m sure it definitely helped a ton sealing it but it’s going to get dusty just having the doors open I’m guessing. It’s looking so nice, time for a lift.
I'd love to have a steel building filled with Honda's. That's awesome man!
I hope some day to also have a garage like this with a couple clean hondas😎🙌🏽
Your space is legit bro !!!!! Love your channel !!
Thanks brotha!
Beautiful garage,Jon. Excellent work as usual.
Thanks
Those garage door brushes are really cool. good tip too
They made a fantastic difference!!
Quite the fleet your building up! I'd be lying if I said I wasn't jealous. :)
Just trying to get answer to my transmission /.clutch replacement. Anyways, removed the transmission to change the worn input shaft bearing, replaced clutch, throwout bearing/spring, flywheel, rear main oil seal. Put everything back, tried to start it but it's revving trying to turn over and there's this sound like something hitting a plastic container or something. It only happens after the engine is trying to crank up. Then, boom, not too low but sounds like hitting a plastic container as I am sitting inside my car. Battery is brand new. Adjusted the clutch cable per ErictheCarGuy. Followed your transmission removal video as a guide. Thanks for your help.
Check the starter. Check the flywheel cover plate on the bottom of the engine. Everything else sounds copacetic.
@@GarageBuiltHondas Thanks for the quick reply. More questions, if you don't mind. When you say check starter, meaning take it out and check it? How? The same question to the flywheel cover plate. Again, appreciate your help.
@@ekneegoaler7717 you can apply power to it out of the car and see if it kicks the rod out. Remove the flywheel inspection plate and just see if you can hear or see anything. Also make sure its tightened completely.
I'm fortunate with floor space in my garage. So what made it much easier for me to move my cars around with ease was some car/wheel dollys under each wheel. Full 360 control.
Harbor Freight.
I want to get some!
It looks great! Very professional
Thanks Dale
Dod gammit.... I want your garage so bad!!! Im happy for you that you have your dream shop and a super bad ass car collection!!
that is super nice and thanks for sharing your garage. really feel part of your garage build.
You're welcome, thanks for being a part of the channel.
Best way to seal the floor gaps is with sack concrete.. Mix it up and put it between the floor and the bottom plate, will seal it AIR TIGHT!
Thanks for the tip!
Man, you're giving me some major garage envy. I was researching on getting a 24 x 24 steel building to work on my civics, but now I'm thinking of pulling out from my retirement to get a setup like yours. lol. I think my 5 EG civics 1 FJ & del sol deserve a home like yours. I could only dream. :-)
Man, all I can say is build big enough for what you're happy with. When building my garage I had 4 cars. It quickly spiraled out of control having the extra room but I'm happy. Next is a couple 4 post lifts to stack a couple cars and keep one bay just to work on something.
@@GarageBuiltHondas I just gotta convince my better half :-) btw, awesome updates on the garage build from flooring to sealing the joints. Learning a lot. I'm sure I can learn even more from your actual car vids. following.
Glad you liked them, appreciate the comments and support!
"How to build a garage for your garage built hondas" Nice work as always.! Seal the deal brother
Thank you
Keep up the good work! If I may, I have a recommendation for your work space. Listening (not watching) your videos, I notice a lot of echo, slap back noise in the garage. It might be on your “to do” list all ready, but if you could do some acoustic treatment, you’ll reduce a lot of ear fatigue. When the air gun, air hammer and even the normal use of the air compressor gets going, it could really be annoying. In my garage, with inside metal walls, the top 4 feet are stippled with holes that soak up some annoying frequencies. I’ve also hung banners, all over, similar to what you have on the upper back wall, which help a lot! Just some thoughts with the goal of only wanting to be of help...enjoy the new garage! Rob
Thanks for the recommendations, definitely a good idea. I want more banners, just haven't bought more so far too the help that.
Looks like it’s time for a lift or two. What a great set up!
Agreed, thanks!
Thanks for the tips. What did you use on your concrete floor? It looks dope.
This th-cam.com/video/Cd9zKHY4uig/w-d-xo.html
love the garage and what it has become. all those Efs there. priceless. i just got a 88crx (non si) in Oct. but unfortunately live in Cali so swaps or high hp will have to wait lol. Jon, due you plan on getting an EG or EK in the future? i'm curious how you would build one. my taste in mods are similar to yours XD simple but efficient mods. i do plan on going all out in interior on the CRX, prob put some gaming references since i'm a gamer too.
Keep up the great work and looking forward to the next vid!
Thanks, I appreciate the love and support!!
EK? Just bought one last week. It's a sedan and supposed to be a 2nd daily, but it might just be a flip so we'll see. I really like it, needs a new water pump but that's a pretty easy job so we might see a DIY on that setup.
I was huge into Halo 1-2 and then GOW1-2-3 where I was a beast in Annex. I gave up gaming 4 years ago when I wanted to devote more time to making videos and doing car stuff. I'll get a huge urge to play though sometimes, I miss the gnasher from GOW. Those shottie battles were so fun to me.
@@GarageBuiltHondas dude! Im a huge halo fan, grew up with that. Now i mainly play leauge of legends. But my close friends are big GOW players. Im thinking of putting some game related carpet on the back of the crx. Since im missing some interior prices. Cut out a board to flatten out the entire back. And knit something on it. Idk yet.
That'd be hella cool
I like your shop man it’s nice and you have a nice collection of efs in there! I would be in there all day. And that’s good to keep all the dirt coming in. That would bother me as well
You know what's up!
Looks good. Congrats
Thanks buddy!!
Congratulations Jon! Next will be the Lift😎
I hope so!
That’s awesome that you have your own space
Thanks Antoine!!
You have a fine stable of EFs. Garage is fantastic, maybe some insulation, sheet rocks, and you're good.
Agree Johnny
More videos! Digging your cars!!!! O and really nice garage......
Thanks John, more soon!!
Great work!
Do you get any condensation build up on the roof since sealing everything up? I've been considering sealing my garage up also. I just don't want the condensation to be an issue. I live in SC where it gets super humid.
Thanks in advance!
I don't, but I live in the desert. We are really dry here in El Paso, TX.
@@GarageBuiltHondas
Thank you for the prompt reply!
Keep up the great work brother, and may God bless you
Finally got my 90 crx sorted out, but now the only problem I have is the race header and the O2 sensor potions on it. I can fit my O2 because of my fan shroud is in the way. But wanted to know if you have race headers on any of your single cams, if you had the same problem I had, and what brand headers you might suggest for single cams?!?!??
What "brand" of header are you using?
Goals man you care along way ❤️👍👍👍
Looks great bud!!!
Thanks Randy.
Off subject of the video but i have a 2013 civic coupe non si ex i believe and want to drop it but not sure if skunk2 will fit? Any information of what part number will fit my car would be helpful thanks for your time 👍
I don't know either. Check skunk2.com I'm sure it'll have the info if available.
great job loving it
Thank you
Really nice setup for your efs
Thank you!
How well is the polyurethane concrete adhesive working/holding up?
I love it. I also used it to glue some weather strips to the floor where the 3 garage doors close and it's solid as hell.
A real honda dream garage
How is the caulking do for the base rails?
No issues. It worked out really well.
That Seahawks banner!!!
I'm sure you have answered this in the past but what are the dimensions of the shop ? And do you plan to put in a lift ?
50x20
Yes 👍
When did you pick up that rattle canned hatch? Did you make a vid on it?
April 2019. Been working on it here and there. I've recorded any footage but haven't pieced together the videos yet. Hoping to get it running this year and have some fun with it.
Wish I still had a garage to just store/work my car in. Not that common to find that type of setup while in Japan.
I hear ya
Where you'd get the brush seals from?
North Shore Commercial Door online. They've got a really nice selection of seals and brackets.
Hey, I recently put an intake manifold from an SI on my non-vtec sohc zc and everything plugged up perfect. I have a 4/2/1 exhausted manifold on my car, but my fan is in the way for the O2 sensor. So what I did was rout the O2 to the secondary location of the exhaust. But driving it for about 30min a check engine light came on and was wondering if it could be me routing the O2 sensor on the bottom end of my exhaust. My ecu is flashing what I want to believe is a code 1, but it's so damn hard to read the codes to know what it really is.
Relocation shouldn't affect an obd0 o2 sensor. I've done it many times to the position right before the catalytic converter. Recheck your wiring, and maybe even the o2 sensor isn't working now.
@@GarageBuiltHondas okay, I'll definitely check wiring and check the o2 sensor. Also when you rerouted your o2 did you have to extend any of the wires?
Judt the o2 sensor wiring. You may want to try shielded wiring if you're still having issues. Sometimes that'll do the trick.
I'm having one of these types of buildings put up soon and will probably be doing something similar. In hind sight, would you say it would be worth it to buy one of the battery powered caulk guns?
I didn't need it. I only used caulking on the floor joints and it didn't take long. I don't use caulking often so for me it was inexpensive to use the cheap $5 guns from Lowe's.
Garage Built Hondas cool thanks. Last question I swear. Do you wish you had opted for the bubble wrap insulation stuff? I ordered mine with the insulation on the roof only. Thinking about having them do the whole thing.
Also, 7:02 reeeee I’m offended! Jk.
I didn't do the insulation just to save on money when I was building it. After experience almost 1 year in it, I definitely think it would've helped during the summer to keep it cooler. I may try to insulate the roof eventually.
Do you have room to build in a loft for additional storage?
I probably could
Just here to drool over the white and yellow hondas 🤤
Nice, thanks!!
Did the stuff you sprayed ooze out to the outside at all?
A few spots, but I just cut it off with a blade from outside.
Can you give me some details on those brushes you installed on the doors?
www.northshorecommercialdoor.com/brush-seals.html
@@GarageBuiltHondas Thanks!
I might be getting another EF myself, it's in rough shape but for a track car not too bad. I just don't know if I want one that far gone lol
Just get it. Save it!!
@@GarageBuiltHondas they have to come down on the price first lol I paid $1,000 for my first one and she was in amazing shape. She's my daily now, running great! For the right price I couldn't say no hahaha
You'll find one if you keep looking!
@@GarageBuiltHondas hey Jon I have a question. I recently changed my injectors on my dpfi D15 and I noticed that when I put the car in reverse it shakes like a low rumble. I recently checked my codes nothing is showing. Could this be related to the injectors? It runs fine doesn't do it any other time, only in reverse.
Possibly, especially if it didn't do it before. Is the car an automatic?
Dream Garage all day super nice 👌 👍
Thanks Oscar
How's the polyurethane holding up at the base,?
Zero issues
That seahawks banner though!!
You know what's up!!
My freaking dream to have this garage setup one day
You'll get there, be persistent and you'll have one too!
@@GarageBuiltHondas facts just have the right mind set and keep pushing to my goals
Love to hear it, it can be hard to stay focused though too!
Does this keep water out too??
Yes
do you have a driver side fender for sale?
I do not, sorry.
Any chance of getting a garage built honda sticker for my honda?
garagebuilthondas.bigcartel.com/
how much was the garage?
th-cam.com/video/KV7PWdaHOP4/w-d-xo.html
You should have sealed it the day they built it? Big fan but com'on man lol that's shed/garage 101. You're going to get hornet or bees nests some day and that will be why, no seal. Only openings should be controlled - Meshed vents or filtered vents that can be cleaned or replaced easily. Gluck
Life didn't work out that way. We had a baby the next day after electrical was finished back on October 8th and with work/life I don't have frequent time to be outside more than 1 day a week if I'm lucky. I had plans of how I wanted to finish it but have never owned a structure of this magnitude and therefore was unaware of the gaps/openings. It's fixed now, shouldn't pose much of a problem in the future either.
I got a 1991 Honda CRX, how much can I get for it. Engine turns but not running?
Depends on cleanliness. How rough is it?
@@GarageBuiltHondas It had issues with the distributer where the spark plugs connect and left it there since 2012. A Fedex delivery driver female was offering $1000.00 as is but I know that restorers would love to get their hands on it.
Might need a new gas tank and fuel pump also.
@@GarageBuiltHondas yea sounds right.
I remember these cars brand new in the late 80s and early 90s and thought these cars were ahead of it's time. Surprised Honda discontinued the CRX model.
How has that polyurethane held up over time?
Zero issues so far and had kept all water out.
A clean space to work on cars makes all the difference!
It is, we'll share some beers out there next time.
@@GarageBuiltHondas sounds like a plan to me 👌 and I need to take a couple of them out for a ride
Definitely, we'll go beat on any that are running!
If I give u the lead to a crx si that is for sale would u buy it lol is here in ep
I'm down!
I’ll send u a pic they are asking 1700 single cam with working a/c
I send u the pics in IG
👏👍
Bro I’d like to see it one day xD
Come on over!
Do you know who manufactured the garage?
A company called Infinity Carports out of Alba, TX
This is my dream
Thanks Logan
Man tooooo dam sickkkk 👍
Thanks brotha
Build a loft over the area where your going to park ur cars
I might possibly in the future.
-Relatively inexpensive $6-8 a bottle
- Me buying the $1.50 bottles...
Lol
should of used flex seal lol. great work
Thought about it, but wanted something more industrial.
@@GarageBuiltHondas I was mostly joking about the flex seal but who knows iv'e never used the product, i think you did a good choice here. Thanks for all the content you make.
It's all good. I consider all options since I'm usually budget minded as well.
All u need is a lift nice garage setup
Agreed. Future plans I hope
These add kids are hillarious.
I don't think they built yours well, I have a similar one and it doesn't have the gaps you do. I used spray foam on the corners.
It is what it is, I'm happy still. They probably have a better built design for yours.
Add some lifts
I want to!
Flex seal!!
Might have been easier, I don't believe it expands though and some of the joints were 1" wide.
Garage Built Hondas I used flex seal on mine . But no gaps that large
👍
Just get a Roomba, bro!
Lol, nice!!
Everything is perfect...except for the SeaChickens flag
😂😂😂. Who's your team brotha?
Garage Built Hondas ...my team is the 49ers....😳. Nice garage tho. I’m jealous man.
Yup, I hate your team too. Lmao!
And thanks man, I'm super grateful to be able to own it.
Dramamine
Bro just get the whole thing spray insulated with closed cell foam