5:20 There's also a vent plug at the top of each wheel axle that needs to be removed when draining and adding fluid back in. If not removed it will be hard to get all the fluid back in and at the proper level.
I would really appreciate a 50 hr review. I’m trying to decide between the 474 and 574. I was originally leaning toward a new JD 4 series can. But have now turned to TYM. I’m just concerned about the stability of the 474 vs the 574. Thanks
I got it from my local rural king store. Yes J20C. don’t buy any yellow bucket stuff. Most mechanics recommend case IH or John Deere hydraulic fluid. Claim it’s significantly better.
New part numbers edit. Filter numbers HST/Hydraulic: NAPA FIL 1586, Wix 51586, Donaldson P169078 Oil filter: NAPA FIL 1626, Wix 51626 Air filter: ST sa9269, wix546671 Air filter Donaldson P772579 P827653 off eBay. Then that first fuel filter number is wrong above. I bought a kit off Amazon to change it over to a better filter system and cheaper as well. Part number below is straight off Amazon. iFJF 35-60494-1 Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 S3213 S3214 B32013 18-7932-1 18-7922 18-7932 18-7928-1 18-7928 18-7919 10 Micron Marine 35-809097
New part numbers edit. Filter numbers HST/Hydraulic: NAPA FIL 1586, Wix 51586, Donaldson P169078 Oil filter: NAPA FIL 1626, Wix 51626 Air filter: ST sa9269, wix546671 Air filter Donaldson P772579 P827653 off eBay. Then that first fuel filter number is wrong above. I bought a kit off Amazon to change it over to a better filter system and cheaper as well. Part number below is straight off Amazon. iFJF 35-60494-1 Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 S3213 S3214 B32013 18-7932-1 18-7922 18-7932 18-7928-1 18-7928 18-7919 10 Micron Marine 35-809097
You turned a sub 5 minute video into a 20 minute video, and still didn't say where to add the hydro fluid... if you did it wasn't around the time you were filling the hydro..
I thought this was a comment on my mower video. Hydraulic fluid goes into fill hole on back of tractor by 3pt hitch. (Yellow) plastic plug. Takes almost 10 gallons.
I just had my new 474 delivered yesterday. Thanks for this video!
Really good video, I appreciate you taking the time to explain the amounts of fluids needed. I was wondering how much to buy for the front axle.
5:20 There's also a vent plug at the top of each wheel axle that needs to be removed when draining and adding fluid back in. If not removed it will be hard to get all the fluid back in and at the proper level.
Cool! Thank you 👍🏻
What spin on transmission filter did you use and I can’t find sight glass?
I would really appreciate a 50 hr review. I’m trying to decide between the 474 and 574. I was originally leaning toward a new JD 4 series can. But have now turned to TYM. I’m just concerned about the stability of the 474 vs the 574. Thanks
I did do a 50hr review on this tractor. Go to my videos.
Did you go with the TYM, I decide to trade my Kubota 3901 in for the T474 cab model with backhoe, its a work horse with 250 hours on it now.
Where did you get the J20C recommendation, or is this a universal hydraulic oil? Thx
I got it from my local rural king store. Yes J20C. don’t buy any yellow bucket stuff. Most mechanics recommend case IH or John Deere hydraulic fluid. Claim it’s significantly better.
Can you share a list of the TYM filter # to aftermarket #?
Donaldson P169078 hydraulic filter
Wix hydraulic filter (wix 51586)
Oil filter (wix 51334)
Air filter (stp sa9269)
Fuel filter (wix 33263)
That’s the ones I know and use.
New part numbers edit.
Filter numbers
HST/Hydraulic: NAPA FIL 1586, Wix 51586, Donaldson P169078
Oil filter: NAPA FIL 1626, Wix 51626
Air filter: ST sa9269, wix546671
Air filter Donaldson P772579 P827653 off eBay.
Then that first fuel filter number is wrong above. I bought a kit off Amazon to change it over to a better filter system and cheaper as well.
Part number below is straight off Amazon.
iFJF 35-60494-1 Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 S3213 S3214 B32013 18-7932-1 18-7922 18-7932 18-7928-1 18-7928 18-7919 10 Micron Marine 35-809097
What engine oil did you use?
15-40 valvoline my self but most any 15-40 oil will work.
I see the sight glass I was looking in wrong area
Can you add some part numbers to the description?
When I get a chance I will. My stuff all came from smith enterprises though.
Donaldson P169078 hydraulic filter
Wix hydraulic filter (wix 51586)
Oil filter (wix 51334)
Air filter (stp sa9269)
Fuel filter (wix 33263)
That’s the ones I know and use.
New part numbers edit.
Filter numbers
HST/Hydraulic: NAPA FIL 1586, Wix 51586, Donaldson P169078
Oil filter: NAPA FIL 1626, Wix 51626
Air filter: ST sa9269, wix546671
Air filter Donaldson P772579 P827653 off eBay.
Then that first fuel filter number is wrong above. I bought a kit off Amazon to change it over to a better filter system and cheaper as well.
Part number below is straight off Amazon.
iFJF 35-60494-1 Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 S3213 S3214 B32013 18-7932-1 18-7922 18-7932 18-7928-1 18-7928 18-7919 10 Micron Marine 35-809097
Can you send me a better picture of the hydro fluid
Just cams J20C adequate hydraulic fluid.
I’ve been told John Deere and international harvester J20C is the best hydraulic fluid on the market though.
You didn’t have to do the fuel filter at 50 hours
No I didn’t. I’m almost to 150hrs now. Then I’ll change it along with oil and hydraulic filter only not the hydraulic fluid.
You turned a sub 5 minute video into a 20 minute video, and still didn't say where to add the hydro fluid... if you did it wasn't around the time you were filling the hydro..
It’s in the video. The hydro fluid goes into the 2 reservoirs under the seat. 5.25 quarts per reservoir.
I thought this was a comment on my mower video.
Hydraulic fluid goes into fill hole on back of tractor by 3pt hitch. (Yellow) plastic plug. Takes almost 10 gallons.