The snap-on model is a red version of the “mp-600 pro scout” which features the blade exchanger and comes with the Remgrit multipurpose cutting blade (poor on metal, good on laminate or hard wood). Overall the blade exchanger is a good but very old idea, as finding the “u type with hole” jigsaw blades are very hard to find compared to the “t shank with hole” blade exchanger found on the leatherman surge. Also, unlike a leatherman or victorinox, the file is not 3 sided. One hand opening with a lot of sacrifices for that feature is kind of sad considering its missing a few features, ie. saw, can opener, longer blades, longer scissors and screwdrivers, and the much better regular wire cutters. Oh well.
Good video. Nice looking tool but I wouldn’t buy it purely because of the Snap-On name. My very first experience with Snap-On was fresh out of UTI. When you graduate they give you a $1,000 Snap-On tool voucher. I used mine on an impact gun and socket set. I oiled it and did all the pre-use stuff the owner’s manual said to do. The gun burned up the very first time I used it. All I was doing was taking the lug nuts off of a 1989 Ford Probe. When I took it to a Snap-On rep who came to the dealership I worked for at the time he said I had abused the tool and refused to replace it. I had to fight with them to get them to honor the warranty. When they finally replaced it I sold the new one along with the sockets and bought a Craftsman gun and socket set which I still have and use to this day (7 years later). When I told my boss about my experience with Snap-On he told the rep to never come to our lot again
I have no personal experience of Snap-On but I do have a friend who's a professional mechanic and his nick-name for Snap-On is Snap-Off (we're based in UK/Europe, I'm not sure if they sell different quality stuff here compared to the US). I do have my own reasons for not liking this specific tool and it's the proprietary bolts (and the blades for that matter). The Gerber version had standard Torx where-as the Snap-On had...??? I accept that if I install after-market parts on my tractor/iPhone/multitool I'm probably voiding my warranty, I'm fine with that, but any company that makes it harder for me to repair my tools for a non engineering related reasons (e.g John Deer, Apple etc) are being idiotic. BTW, Apple's latest phones won't even accept genuine, like-for-like Apple parts unless you have the software to re-flash the phone, which they only give to recognised repair centres obvs. We were told that the open market would encourage competition but I guess that's capitalism in action for you! Edit: Another problem with this tool is the main blade being interior. It's not accessibility that's the problem so much but that you have to keep the tool open to cut anything on a flat surface. With the blade open and the rest of the tool closed you can only use the last inch of the blade.
Worth the doubled price for 3 reasons. No-questions-asked lifetime warranty with weekly visits, the talon-grip tips (they actually make a difference) and the replaceable carbide cutters. Funny story. The hunter brake lathe at my shop uses bits that interchange with it.
I've carried the Gerber Pro Scout for 30 years now. A buddy gave me a Snap-On version that he didn't care for and I switched back and forth between the Pro Scout and the Snap On for a month, what I found was that the Snap On showed more wear cosmetically than the Gerber did, which at the time was over 5 years old. The red paint and oxide finish wears with use. Its not a deal killer but its worth mentioning. The Snap On currently is selling for $180, I bought my last Gerber Pro Scout for $58. The added price for the Snap On name is not worth over $120 more. I do like the single pocket, lower profile Snap On pouch though, its a red version of the original MP600 pouch but a bit better made, or at least it seems to be so far. As to the diamond saw blade in those things, it works better than you would expect. I drive a truck for a living and one day I noticed my battery box hanging down, one of the 1/2 bolts that supports the box had snapped off. The bolt had snapped off and folded over making removing it with a wrench impossible and I used the tiny saw to cut through that bolt and nut, it took a while but it did the job and I got it fixed well enough to keep going that day. Over the years I've had several Gerber tools, mostly all were Pro Scouts, and one plain MP600. My first one was given to me by a buddy who had had his replaced under warranty after one of the clips had failed, they sent him a new one and returned the old one. I found a master link clip to match it and used it for years. I replaced it with a new one when I found them on sale, and bought two, with the intent to keep one for a spare. I bought one used at a fleamarket once too, with the carbide cutter, what I found was that the cutter kept chipping and just didn't last long. I tried various brand carbide inserts and a few were better than others but they all eventually chipped or shattered. I gave that tool to a guy I work with. In the past I've had other brands, and the one I liked the best up until getting the first Gerber was a Schrade, also from Snap On, but it was bulky and harder to use. It was stronger but not as versatile and the blade didn't hold an edge like the Gerber does. Gerber changed the profile of the knife blade in recent years, the older models had a slightly curved blade with a finer tip. Of the two failures I've had, two were broken knife blade tips, one was a broken small flat screwdriver blade. I avoid the plain MP600 due to the lack of scissors, which for me is a key advantage in these things along with the needle nose design. The plier head on the Snap On varies in several ways from the Gerber, besides the obvious carbide cutter, like mentioned in the video, its slightly thicker at the tip, and it has more mass around the back edges as well, but they tapered it off on an odd angle. It gives me the impression they did that just to keep folks from using it as a hammer there, something I've done often with my Gerber. When and if I buy my next one, it'll be the Gerber Pro Scout, the carbide cutter, red finish and black oxide on the Snap On loses out to the satin stainless steel of the Gerber. Early one, Gerber did offer the Pro Scout version in red and black, just like the Snap On model, and about 18 years ago they had a gunmetal gray/black version as well that more resembled a dull black chrome finish. The color versions were sold as Custom Pro Scout models but carried the same part number on the package.
WHAT?!? No way, I gotta get one!! How come I've never seen this particular model?? This is the first time I have even seen this model of Gerber MP600 but there are obvious differences.
Because I’m a big fan of muti tools myself , this Snap on muti tool is on my list to pick up . Problem is the price there asking for it ( $ 166.50 ) is absolutely ridiculous . For that , I could get a G10 Leatherman charge or a Leatherman surge with a bit extender . Also the Surge will put this tool to shame . I like this tool but bring down that price first .
Go on ebay and look up tcmt 731. These are for lathes but are the correct dimensions and work the same but are around £1 (I'm in the UK) to replace vs the £25 for gerber branded ones.
Loving all the content! Your main thing is multi-tools but I have a bit of an unconventional suggestion on a type of multi-tool: the Knipex Pliers Wrench. If you’ve never used one it will change your life. Keep them coming!
Jim Bonney I have a full set of the Knipex plier wrenches and the Cobras as well. I used the 7” version in a repair video I did on my bathroom faucet. You’re right, they were a game changer. I have intention to get into regular tool reviews as well. In about a month or so I should actually have some down time to get my tool trailer back home to Texas. It’s been a busy year.
TX Tool Crib I figured a man of class and taste such as yourself had twisted a screw or two with a plierswrench. They do great with metal work. Used them a ton for fabricating on a totaled Audi R8 I was helping my friend rebuild. In any case, I’m having a great time catching up on all your content. I hope your subscriber base grows as you’re offering a unique perspective. I find the absence of tactical bullshit appealing.
I have really enjoyed watching your videos, and have watched most of them. I see you are producing at a high rate, and since what you are reviewing doesn’t “go bad” there’s nothing wrong with it. People like me who just recently got into multi-tools and knives need to play catch up, and your channel is like a reference library to do just that. I write a blog in my spare time and know the drain of creation. When I get some thanks (which is rare) I am so happy. SO THANK YOU FOR CREATING! I hope you keep up for a long time to come.
Thank you, I appreciate that very much. Keeping up with a channel while keeping up with work can be quite challenging at times, but I do enjoy it. I’m at an age where I think it is time to start giving back. Eventually I would like to show tricks and tips, as well as the tools used in metal fabrication. That is the area that I am most comfortable with. I was fortunate in my life to have an entire family of craftsmen. I know that others are not always that fortunate. Maybe one day my modest little channel can grow into something. For now, I’ll just keep plugging away. Thank you very much for taking the time to watch my videos. It’s comments such as yours that give me incentive to keep making videos. It helps that multi tools are a big hobby of mine.
You’re a smart man watching this guys videos. He is the only person I’ve found on TH-cam that actually knows how a wrench spins AND reviews multitools. Most are tactical/survival/knife people, which is fine, but they don’t know squat about what makes a good trade tool. The Tool Crib is the real deal. This guy’s pinched the meat of his hand in many a plier head on many a grey day.
Nice enough tool but grossly overpriced IMO. Any chance you're going to review the basic mp600? It sounds strange, you've reviewed this Gerber-snap on collaboration, the Gerber diesel, Gerber center-drive, etc, but from what I can tell, never Gerber's most common multi-tool; the mp600.
This type of saw is not that great. I have an MXZ saw with this type of blad that's supposed to cut tile and such, but I just replaced it with a standard reciprocating saw blade of my choosing.
Hello friend In two other videos I see you demonstrating Leatherman multi tool To Ozark trail multi-tool And I seen you using them and the paracord and other then items but not wood with the knife of the Both of them
I’ve owned a couple different Gerbers and they are junk. I’ll take a leatherman over this snap on any day. I’ve been using leatherman multi tools at work for the past 20 years and I abuse the hell out of them. Great tool to have on my belt to use in a pinch when my tool box is not near by. I’ve been doing building maintenance for over 22 years and nothing beats leatherman. The one time I broke one of my leatherman multitools they fixed it, no questions asked.
Couldn't agree more. I did a ton of research before buying my leatherman surge for use at work. I have had Gerbers break in moderate use scenarios (not really beating on them) and I have seen some shoddy workmanship with Gerber multitools. I have not seen a multi tool that is comparable in the quality, value, and versatility of the Surge... if I could find one better I would have bought it.
Better off than buying in Australia: $229.21 USD ($328.83 AUD). Mind you a Leatherman Surge (from the leatherman AU website) is $339.95 AUD ($236.96 USD) and it won't even tell me what the shipping cost is.
Holy copy the hell outta the Gerber multiplyer. But it's happening alot with multi tools losing the patent. I love alot of the other people makeing them again. I didn't see the video before I replied hahahaha I carry the multiplayer and just see the outside similarities.
@@txtoolcrib right hahaha I hadn't watched all they way through but I can see why I love that removable saw blade now that should be for alot of tools to keep it going longer
I would like to point out a couple things concerning the mp600 , i have the exact same design as the snapon and i have used these tools 4 years ive had nearly every make there is and i kept parts from each , i have the pouch with 2 pockets 4 the extra bit set that connects on the philips bit , i have the half serrated blade turned inward intentionally and preffered because of its widdeling capabilities , and ive heard people say "well u can't widdle with a hacksaw blade" and to that i say "so turn the blade around" just pull it loose run it over the file 10 to 15 times and it locks in backwards for a excellent saw capable of really eating through some seriously thick hardened steel and that blade can take it 2 , i think the only reason its replaceable is for the option of using a different style of saw (wood perhaps) ohh and mine has the 1 piece cast jaws and i have the base stainless mp600 (not the snapon) i do however agree that the carbide cutters are not for me and mine is missing those but the scissors are by far the most heavily used item within the tool and i have an early model that says "Fiskar" across the blade , although a bit short they are simply the best it has ever been , Gerber in my opinion has outdone themselves much like Dalorean and they made a perfect tool and now ill likely never find this combination again 🤬 the tool i hold now is my preferred sidearm and i dont leave home without it . . . (Wallet , keys & Gerber
I have one. Enjoy using it. Agree the handle could be redesigned to give more leverage but that is when i go for the regular multigrip pliers. A pity they did not include a bit holder. Thanks for a good review
I've had these for years. I killed the knives blade on accident and my snap on guy gave me a new pair just like the other tools thet sell. Price is around others, that cross hatch is the same as snap on pliers, which work great.
They probably use those carbide cutters because they are the same as what's used to cut rotors and they thought it would be easier to get replacements for mechanics.
You can get that saw on a Gerber MP600. However, you have to go with their MP600 Bladeless model. Designed specifically for travel with airlines. Can be used at workplaces that have those idiotic zero tolerance weapons policies too. On the Bladeless, you don't get any knife at all. You do get scissors. Instead of a blade, you get that Rem-grit saw. Honestly, I'm not a fan. For airline travel or in those work environments, having a bladeless multi-tool is a must. Having some sort of easily detachable and replaceable friction cutting saw is a good option. But the saw itself is not very useful. Requires too much effort that is definitely not aided but a rather lose fit onto the saw-holder on the tool. Very limited usefulness. On something designed to comply with ridiculously strict restrictions, it makes sense. On a normal daily-use multi-tool, no clue why Gerber would go with that design as their saw. Still, if someone likes the Rem-grit saw but wished it came on a multi-tool that also has a knife on it too, this Gerber-made Snap-On model is going to be their best option.
With you on the combo straight / serrated blades. I like common easy to sharpen blades. In fact I don`t know how to sharpen a serrated blade. I like the Gerber MP600 styled multi tools. I prefer Leatherman. I look at SOG and they look nice but don`t seem to rate like the others. Snap On prices on some products made by other`s aren`t too bad, Not knowing what these cost. Nice looking tool. A metallic blue would be sharp too.
I figured out how to get a Rebar into a Wave / Charge in place of the eyeglass driver. Should’ve taken pictures. First run on my Wave. Since I couldn’t find exact instructions, it took about 1 hour of filing and testing. I put the interior cutting tools on one handle, and the bit driver & flathead on the other. I still have to go back and polish out the file marks, and finish adding some thin Teflon & PB washers. Sorry to post here, wasn’t sure how to DM you!
The most useless feature on any knife/multitool is a bottle opener in 90times out of a 100 do I use something else to open a bottle so for me they can put something else there.
Well actually it’s a can opener that you can open bottles. But a dedicated bottle opener tool is kind pointless these days. I’d just use the pliers myself.
Good Review! I have a Gerber version of this tool...I notice the stamping of the sheet metal on the label side ( with the 3-inch measure) is rather crude, compared to my Gerber ( which is very cleanly and neatly stamped) Other than that, I love my Gerber, and would never part with it! It is a shame that I cannot show you a pic of the Gerber !
I think a holder for standard jigsaw blades would be a way more useful feature than the wood saw so many include. I don't know about the grit saw Gerber uses (seems like it would wear fast) but a small hacksaw on my multitool would be extremely handy and way more convenient than clamping a blade in the jaws of a Vise-Grip. lol
@@txtoolcrib Might be a patent issue since that's what Leatherman uses. If it was a T-shank, I would replace the saw with the leatherman file/sharpener. But then I'd have to replace the file with something else.
This is just like the blade less mp600 just with a knife instead of a can opener. I love mine. It’s the only tool I have that gives my surge a run for its money for EDC. Sure the wire cutters aren’t as good but as long as I use them just for electrical wire I haven’t had a issue.
That’s true I like the triangle shape but they are too hard. I do HVAC work and cut the banding in flex duct all day long with my surge with no issues but I destroyed the cutter on my mp600 when I tried to cut it.
One of my viewers said that it was a carbon copy of the pro scout version. I’ve been busy and haven’t had a chance to verify that but I would imagine that he is probably right.
Besides the color, it looks like the knife shape is different. The Pro Scout doesn’t have replaceable carbide cutters, but other MP 600s do. So just a couple minor differences. But the red color is very nice looking.
@@txtoolcrib Almost but not the same. The knife is worse on the Pro Scout but the wire cutters are normal ones instead of carbide inserts. Also you're not paying the Snap-Tax for the Pro Scout and it's about $100 cheaper in cost.
I have to agree with your assessment of the color combination. I don't usually place significant value on the cosmetic impression, function and ergonomics being so much more important in a tool than looks, but it would weigh a little for me in this case. I must say, my initial excitement at seeing that Snap-On has a multi-tool was immediately extinguished upon learning that Gerber makes it for them. It is disappointing that they haven't come up with a design of their own and that disappointment is multiplied several fold by their choice of Gerber over any of the better multi-tool makers.
@@txtoolcrib Or simply someone who has used a tool so they can have a valid opinion. Yours is not a review, it seems it’s just the irrelevant initial observations of some ass hat who likes the sound of his own voice.
Actually it’s done by someone who knows more about tools then you can learn in three lifetimes. I think you might wanna go check out some more of my videos before running your mouth.
@@txtoolcrib You have nothing to base that on, however, thanks to your own admission you’re reviewing something you’ve never seen or used. Therefore any other knowledge you claim to have is irrelevant, you know nothing about this tool and yet you’re arrogant enough to review it. How important you must be. Or maybe just another American Wanker.
Lol. I know more about tools and industry than you could learn in three lifetimes. You’re right about me being arrogant, I’ll give you that. However there’s quite a difference between someone being arrogant and someone being arrogant with the ability to back it up.
Thank you for introducing this beautiful and rare multitool! I haven't purchased this product because it was too expensive in the past Are snap-on and GERBER affiliated with each other? GERBER MP600 Military Replacement Versions of Plier MP600 PRO SCOUT Replacement Saw Blades and Composite Blades The color and sheath of the handles have been changed, but the color is too expensive. It is difficult to obtain a separate saw blade for the GERBER saw blade adapter that is not available. If you were equipped with a saw blade adapter of TOOL 300 EOD, you would be loved as a modified multitool.
I don’t know much about this particular multi tool. This was actually my first time seeing one up close. I didn’t really ever pay that much attention to it because I don’t care for OTF plier designs. To my knowledge, the companies are not affiliated in any way. Gerber is contracted to make this tool for Snap-On, that is the extent of their relationship.
Great vid as always bud. I enjoyed it and have a couple of older Gerbers. I wonder why Snap On didn't partner with Leatherman. I am with you in that I can't stand the carbide cutters..Keep the videos coming. We enjoy them.
You’re right. The Surge has been out since 2013 on the second generation too. Most of the multi tools I own have been out for multi years. What’s your point?
Rien que la vérité Who cares if he makes a different review??? Haven’t you noticed the same exact thing with EVERY OTHER THING ON TH-cam!!?? Look up the new Toyota Supra for example......have you made comments on every person who “wasn’t the first to review it”. TX Toolcrib makes very good videos. I’d rather watch his reviews than many others. To each their own but....if repetition or product saturation bothers you....you should NOT be on TH-cam. Lol🤣🤣🤣🤷🏼♂️
The snap-on model is a red version of the “mp-600 pro scout” which features the blade exchanger and comes with the Remgrit multipurpose cutting blade (poor on metal, good on laminate or hard wood). Overall the blade exchanger is a good but very old idea, as finding the “u type with hole” jigsaw blades are very hard to find compared to the “t shank with hole” blade exchanger found on the leatherman surge. Also, unlike a leatherman or victorinox, the file is not 3 sided. One hand opening with a lot of sacrifices for that feature is kind of sad considering its missing a few features, ie. saw, can opener, longer blades, longer scissors and screwdrivers, and the much better regular wire cutters. Oh well.
Thank you for clarifying. I must admit I haven’t even looked at a pro scout version of the MP 600. I need to brush up on my Gerber models.
Dont worry if u dont have the money. Snap on will give it to you for the low amount of 50 bucks a week for the next 35 years.
Good video. Nice looking tool but I wouldn’t buy it purely because of the Snap-On name. My very first experience with Snap-On was fresh out of UTI. When you graduate they give you a $1,000 Snap-On tool voucher. I used mine on an impact gun and socket set. I oiled it and did all the pre-use stuff the owner’s manual said to do. The gun burned up the very first time I used it. All I was doing was taking the lug nuts off of a 1989 Ford Probe. When I took it to a Snap-On rep who came to the dealership I worked for at the time he said I had abused the tool and refused to replace it. I had to fight with them to get them to honor the warranty. When they finally replaced it I sold the new one along with the sockets and bought a Craftsman gun and socket set which I still have and use to this day (7 years later). When I told my boss about my experience with Snap-On he told the rep to never come to our lot again
That sounds reasonable and intelligent. So if a shit brand renames their product you're considering the purchase? 😂
That’s a shame. My father had a garage back in the 70s and Snap-On was very solid.
I have no personal experience of Snap-On but I do have a friend who's a professional mechanic and his nick-name for Snap-On is Snap-Off (we're based in UK/Europe, I'm not sure if they sell different quality stuff here compared to the US).
I do have my own reasons for not liking this specific tool and it's the proprietary bolts (and the blades for that matter). The Gerber version had standard Torx where-as the Snap-On had...???
I accept that if I install after-market parts on my tractor/iPhone/multitool I'm probably voiding my warranty, I'm fine with that, but any company that makes it harder for me to repair my tools for a non engineering related reasons (e.g John Deer, Apple etc) are being idiotic. BTW, Apple's latest phones won't even accept genuine, like-for-like Apple parts unless you have the software to re-flash the phone, which they only give to recognised repair centres obvs.
We were told that the open market would encourage competition but I guess that's capitalism in action for you!
Edit: Another problem with this tool is the main blade being interior. It's not accessibility that's the problem so much but that you have to keep the tool open to cut anything on a flat surface. With the blade open and the rest of the tool closed you can only use the last inch of the blade.
Snap on way over priced
Worth the doubled price for 3 reasons. No-questions-asked lifetime warranty with weekly visits, the talon-grip tips (they actually make a difference) and the replaceable carbide cutters. Funny story. The hunter brake lathe at my shop uses bits that interchange with it.
I've carried the Gerber Pro Scout for 30 years now. A buddy gave me a Snap-On version that he didn't care for and I switched back and forth between the Pro Scout and the Snap On for a month, what I found was that the Snap On showed more wear cosmetically than the Gerber did, which at the time was over 5 years old. The red paint and oxide finish wears with use. Its not a deal killer but its worth mentioning. The Snap On currently is selling for $180, I bought my last Gerber Pro Scout for $58. The added price for the Snap On name is not worth over $120 more. I do like the single pocket, lower profile Snap On pouch though, its a red version of the original MP600 pouch but a bit better made, or at least it seems to be so far.
As to the diamond saw blade in those things, it works better than you would expect. I drive a truck for a living and one day I noticed my battery box hanging down, one of the 1/2 bolts that supports the box had snapped off. The bolt had snapped off and folded over making removing it with a wrench impossible and I used the tiny saw to cut through that bolt and nut, it took a while but it did the job and I got it fixed well enough to keep going that day.
Over the years I've had several Gerber tools, mostly all were Pro Scouts, and one plain MP600.
My first one was given to me by a buddy who had had his replaced under warranty after one of the clips had failed, they sent him a new one and returned the old one. I found a master link clip to match it and used it for years. I replaced it with a new one when I found them on sale, and bought two, with the intent to keep one for a spare.
I bought one used at a fleamarket once too, with the carbide cutter, what I found was that the cutter kept chipping and just didn't last long. I tried various brand carbide inserts and a few were better than others but they all eventually chipped or shattered. I gave that tool to a guy I work with.
In the past I've had other brands, and the one I liked the best up until getting the first Gerber was a Schrade, also from Snap On, but it was bulky and harder to use. It was stronger but not as versatile and the blade didn't hold an edge like the Gerber does.
Gerber changed the profile of the knife blade in recent years, the older models had a slightly curved blade with a finer tip.
Of the two failures I've had, two were broken knife blade tips, one was a broken small flat screwdriver blade.
I avoid the plain MP600 due to the lack of scissors, which for me is a key advantage in these things along with the needle nose design.
The plier head on the Snap On varies in several ways from the Gerber, besides the obvious carbide cutter, like mentioned in the video, its slightly thicker at the tip, and it has more mass around the back edges as well, but they tapered it off on an odd angle. It gives me the impression they did that just to keep folks from using it as a hammer there, something I've done often with my Gerber.
When and if I buy my next one, it'll be the Gerber Pro Scout, the carbide cutter, red finish and black oxide on the Snap On loses out to the satin stainless steel of the Gerber.
Early one, Gerber did offer the Pro Scout version in red and black, just like the Snap On model, and about 18 years ago they had a gunmetal gray/black version as well that more resembled a dull black chrome finish.
The color versions were sold as Custom Pro Scout models but carried the same part number on the package.
Huh. Interesting. A Snap-On tool that is decent. I wonder how long you have to work to pay off this tool.
$160...The Snap-Tax is too much for me, so I gave it a pass...
WHAT?!? No way, I gotta get one!! How come I've never seen this particular model?? This is the first time I have even seen this model of Gerber MP600 but there are obvious differences.
Do you know where I could find more blades for the blade exchanger?
Hey Ben have you ever reviewed the Gerber MP650 Evolution? It has interchangeable plier heads. Curious, would like to hear your take on it.
It's a snap on product, probably grossly overpriced. I wouldn't be surprised if the price point on this is $140 or better from snap-on
Because I’m a big fan of muti tools myself , this Snap on muti tool is on my list to pick up . Problem is the price there asking for it ( $ 166.50 ) is absolutely ridiculous . For that , I could get a G10 Leatherman charge or a Leatherman surge with a bit extender . Also the Surge will put this tool to shame . I like this tool but bring down that price first .
I like the red. Easy to find in a pile of other tools.
Is there aftermarket alternatives that can replace the carbide cutters with something better?
None that I am aware of at the moment.
Go on ebay and look up tcmt 731. These are for lathes but are the correct dimensions and work the same but are around £1 (I'm in the UK) to replace vs the £25 for gerber branded ones.
Loving all the content! Your main thing is multi-tools but I have a bit of an unconventional suggestion on a type of multi-tool: the Knipex Pliers Wrench. If you’ve never used one it will change your life. Keep them coming!
Jim Bonney I have a full set of the Knipex plier wrenches and the Cobras as well. I used the 7” version in a repair video I did on my bathroom faucet. You’re right, they were a game changer. I have intention to get into regular tool reviews as well. In about a month or so I should actually have some down time to get my tool trailer back home to Texas. It’s been a busy year.
TX Tool Crib I figured a man of class and taste such as yourself had twisted a screw or two with a plierswrench. They do great with metal work. Used them a ton for fabricating on a totaled Audi R8 I was helping my friend rebuild. In any case, I’m having a great time catching up on all your content. I hope your subscriber base grows as you’re offering a unique perspective. I find the absence of tactical bullshit appealing.
I have really enjoyed watching your videos, and have watched most of them. I see you are producing at a high rate, and since what you are reviewing doesn’t “go bad” there’s nothing wrong with it. People like me who just recently got into multi-tools and knives need to play catch up, and your channel is like a reference library to do just that.
I write a blog in my spare time and know the drain of creation. When I get some thanks (which is rare) I am so happy.
SO THANK YOU FOR CREATING! I hope you keep up for a long time to come.
Thank you, I appreciate that very much. Keeping up with a channel while keeping up with work can be quite challenging at times, but I do enjoy it. I’m at an age where I think it is time to start giving back.
Eventually I would like to show tricks and tips, as well as the tools used in metal fabrication. That is the area that I am most comfortable with. I was fortunate in my life to have an entire family of craftsmen. I know that others are not always that fortunate. Maybe one day my modest little channel can grow into something. For now, I’ll just keep plugging away.
Thank you very much for taking the time to watch my videos. It’s comments such as yours that give me incentive to keep making videos. It helps that multi tools are a big hobby of mine.
Well said I agree
You’re a smart man watching this guys videos. He is the only person I’ve found on TH-cam that actually knows how a wrench spins AND reviews multitools. Most are tactical/survival/knife people, which is fine, but they don’t know squat about what makes a good trade tool. The Tool Crib is the real deal. This guy’s pinched the meat of his hand in many a plier head on many a grey day.
Jim Bonney that is exactly why I have been going through his catalogue looking for a good tool for work. Excellent quality videos with real knowledge.
Nice enough tool but grossly overpriced IMO. Any chance you're going to review the basic mp600? It sounds strange, you've reviewed this Gerber-snap on collaboration, the Gerber diesel, Gerber center-drive, etc, but from what I can tell, never Gerber's most common multi-tool; the mp600.
I need to buy one. I own that particular model.
This type of saw is not that great.
I have an MXZ saw with this type of blad that's supposed to cut tile and such, but I just replaced it with a standard reciprocating saw blade of my choosing.
I just noticed mine doesn’t say usa stamped on it that one does…..weird
😂 it’s a diesel.. and the tools are a grab bag of the tools available on various Gerber tools.
Replace the carbide cutters with Little Machine Shop tcmw 21.51 hss inserts and all the cutter problems are not there.
ngl the blade exhanger ive been switching it with fine metal saw blades. and the one it came with i would use it for wood fibre galss etc.
fabricator here i drill little holes in jig saw blades to put em in place of the diamond saw
Hello friend
In two other videos I see you demonstrating
Leatherman multi tool
To Ozark trail multi-tool
And I seen you using them and
the paracord and other then items
but not wood with the knife of the
Both of them
I got Gerber 600s for $7 each.
I bought 4.
Does this tool fit in kydex sheath for mp600
I would imagine it would fit just perfect. It utilizes the same frame as far as I know.
I’ve owned a couple different Gerbers and they are junk. I’ll take a leatherman over this snap on any day. I’ve been using leatherman multi tools at work for the past 20 years and I abuse the hell out of them. Great tool to have on my belt to use in a pinch when my tool box is not near by. I’ve been doing building maintenance for over 22 years and nothing beats leatherman. The one time I broke one of my leatherman multitools they fixed it, no questions asked.
kmacnumber2 I’m more of a Leatherman man myself.
I'd have my Gerber over any leatherman.
Couldn't agree more. I did a ton of research before buying my leatherman surge for use at work. I have had Gerbers break in moderate use scenarios (not really beating on them) and I have seen some shoddy workmanship with Gerber multitools. I have not seen a multi tool that is comparable in the quality, value, and versatility of the Surge... if I could find one better I would have bought it.
snap-on are not as good as they were in the 90s now we call it snap-off
Snap on its kinda over rated
For the now asking price of $175 they should at least update this and give us a 1 handed opening blade . I mean come on now .
Better off than buying in Australia: $229.21 USD ($328.83 AUD). Mind you a Leatherman Surge (from the leatherman AU website) is $339.95 AUD ($236.96 USD) and it won't even tell me what the shipping cost is.
For the price I'd just get a Leatherman surge. Although I do love having a driver that takes regular bits.
Holy copy the hell outta the Gerber multiplyer. But it's happening alot with multi tools losing the patent. I love alot of the other people makeing them again. I didn't see the video before I replied hahahaha I carry the multiplayer and just see the outside similarities.
This one was actually a Gerber collaboration. These were built specifically for them.
@@txtoolcrib right hahaha I hadn't watched all they way through but I can see why I love that removable saw blade now that should be for alot of tools to keep it going longer
I would like to point out a couple things concerning the mp600 , i have the exact same design as the snapon and i have used these tools 4 years ive had nearly every make there is and i kept parts from each , i have the pouch with 2 pockets 4 the extra bit set that connects on the philips bit , i have the half serrated blade turned inward intentionally and preffered because of its widdeling capabilities , and ive heard people say "well u can't widdle with a hacksaw blade" and to that i say "so turn the blade around" just pull it loose run it over the file 10 to 15 times and it locks in backwards for a excellent saw capable of really eating through some seriously thick hardened steel and that blade can take it 2 , i think the only reason its replaceable is for the option of using a different style of saw (wood perhaps) ohh and mine has the 1 piece cast jaws and i have the base stainless mp600 (not the snapon) i do however agree that the carbide cutters are not for me and mine is missing those but the scissors are by far the most heavily used item within the tool and i have an early model that says "Fiskar" across the blade , although a bit short they are simply the best it has ever been , Gerber in my opinion has outdone themselves much like Dalorean and they made a perfect tool and now ill likely never find this combination again 🤬 the tool i hold now is my preferred sidearm and i dont leave home without it . . . (Wallet , keys & Gerber
I have one. Enjoy using it. Agree the handle could be redesigned to give more leverage but that is when i go for the regular multigrip pliers. A pity they did not include a bit holder. Thanks for a good review
they call it a rem grit saw and it can cut wood metal and plastic. it is on other mp600 models as well
ryan lavallee thank you. In your experience how well do they work?
TX Tool Crib it cuts all three fine but is limited by its length
Those cutters are the worst.I don't carry my mp 600 anymore because if you cut hard wire with these carbide inserts they will crumble.
Yeah i have no use for a can/bottle opener. I can use just about anything to open a bottle and have few use cases fir a can opener. Just saying.
I've had these for years. I killed the knives blade on accident and my snap on guy gave me a new pair just like the other tools thet sell. Price is around others, that cross hatch is the same as snap on pliers, which work great.
They probably use those carbide cutters because they are the same as what's used to cut rotors and they thought it would be easier to get replacements for mechanics.
You can get that saw on a Gerber MP600. However, you have to go with their MP600 Bladeless model. Designed specifically for travel with airlines. Can be used at workplaces that have those idiotic zero tolerance weapons policies too.
On the Bladeless, you don't get any knife at all. You do get scissors. Instead of a blade, you get that Rem-grit saw. Honestly, I'm not a fan. For airline travel or in those work environments, having a bladeless multi-tool is a must. Having some sort of easily detachable and replaceable friction cutting saw is a good option. But the saw itself is not very useful. Requires too much effort that is definitely not aided but a rather lose fit onto the saw-holder on the tool. Very limited usefulness.
On something designed to comply with ridiculously strict restrictions, it makes sense. On a normal daily-use multi-tool, no clue why Gerber would go with that design as their saw. Still, if someone likes the Rem-grit saw but wished it came on a multi-tool that also has a knife on it too, this Gerber-made Snap-On model is going to be their best option.
NGMonocrom Thank you for sharing. I don’t have any experience with that Rem-grit saw, because frankly, I don’t use Gerber multi tools very often.
hey what do you know.. a tool reviewer with scars on his hands! i’m subing
Also, the bit driver for the Leatherman Super Tool also fits the Gerber MP600. Not too many people know this.
Sir can u review Bosch 12 in 1 multitool (green)
I’m going to have to look that one up. I wasn’t aware that they made one.
@@txtoolcrib ok sir
The diamond grit saw is good for sawing glass bottles.
Leatherman Surge beats all.
I agree
Only problem is Leatherman is a company that is an Anti-2a company so they won't get my money.
@@DarkAvatar1313 how do you know that
@@luckymeziere3675 Tim Leatherman openly campaigned for John Kerry. Google it.
Agree this is why I love my Center drive. I like the otf pliers and the blade is outside accessible with 1 hand opening for both👍
With you on the combo straight / serrated blades. I like common easy to sharpen blades. In fact I don`t know how to sharpen a serrated blade. I like the Gerber MP600 styled multi tools. I prefer Leatherman. I look at SOG and they look nice but don`t seem to rate like the others. Snap On prices on some products made by other`s aren`t too bad, Not knowing what these cost. Nice looking tool. A metallic blue would be sharp too.
Metallic blue would have looked pretty awesome, I can envision that.
I figured out how to get a Rebar into a Wave / Charge in place of the eyeglass driver. Should’ve taken pictures.
First run on my Wave.
Since I couldn’t find exact instructions, it took about 1 hour of filing and testing. I put the interior cutting tools on one handle, and the bit driver & flathead on the other.
I still have to go back and polish out the file marks, and finish adding some thin Teflon & PB washers.
Sorry to post here, wasn’t sure how to DM you!
You can email me at txtoolcrib@gmail.com
The most useless feature on any knife/multitool is a bottle opener in 90times out of a 100 do I use something else to open a bottle so for me they can put something else there.
Well actually it’s a can opener that you can open bottles. But a dedicated bottle opener tool is kind pointless these days. I’d just use the pliers myself.
Interesting muti tool . 🤔
Nice, but I'm guessing you won't be trading your Surge for it. I wouldn't either.
No sir, it sure won’t.
How’s this snap on if it’s Gerber made?
Maybe you don’t understand how Snap-On works.
Have you heard of the crkt multitool or the shrade multitool? Forgot which one it was but looks cool
Yes sir, heard of them both.
Good Review! I have a Gerber version of this tool...I notice the stamping of the sheet metal on the label side ( with the 3-inch measure) is rather crude, compared to my Gerber ( which is very cleanly and neatly stamped) Other than that, I love my Gerber, and would never part with it! It is a shame that I cannot show you a pic of the Gerber !
I realize it is kinda off topic but do anyone know a good site to stream new movies online?
@Rocky Nasir Try Flixzone. You can find it on google :)
I think a holder for standard jigsaw blades would be a way more useful feature than the wood saw so many include. I don't know about the grit saw Gerber uses (seems like it would wear fast) but a small hacksaw on my multitool would be extremely handy and way more convenient than clamping a blade in the jaws of a Vise-Grip. lol
DefMunkyYT would be better had they used T-shank instead.
@@txtoolcrib Might be a patent issue since that's what Leatherman uses.
If it was a T-shank, I would replace the saw with the leatherman file/sharpener. But then I'd have to replace the file with something else.
This is just like the blade less mp600 just with a knife instead of a can opener. I love mine. It’s the only tool I have that gives my surge a run for its money for EDC. Sure the wire cutters aren’t as good but as long as I use them just for electrical wire I haven’t had a issue.
Adam Argue I wish they would get rid of that carbide inserts and replace it with a better material. Their tools would be so much better for it.
That’s true I like the triangle shape but they are too hard. I do HVAC work and cut the banding in flex duct all day long with my surge with no issues but I destroyed the cutter on my mp600 when I tried to cut it.
@@SpacedSpec does it just bolt in or does it need to be modified?
So close to a win- Why do they use the stupid carbide cutters?
They are are also more expensive than Leatherman‘a replacement cutters, which is discouraging.
And, when they shatter, you cannot just rotate the three-sided cutter, because the whole unit is destroyed.
Hard hard pass on something that can’t cut the wire and I could just by ger
I understand.
Still not a Victornox.
I misjudged this too. I thought it just a red version of the Gerber.
One of my viewers said that it was a carbon copy of the pro scout version. I’ve been busy and haven’t had a chance to verify that but I would imagine that he is probably right.
Yeah it looks just like my MP600 lol
Besides the color, it looks like the knife shape is different. The Pro Scout doesn’t have replaceable carbide cutters, but other MP 600s do.
So just a couple minor differences. But the red color is very nice looking.
@@txtoolcrib Almost but not the same. The knife is worse on the Pro Scout but the wire cutters are normal ones instead of carbide inserts. Also you're not paying the Snap-Tax for the Pro Scout and it's about $100 cheaper in cost.
Damn that’s a nice looking colour ! Love it! I like those kind of multi tool design where the pliers slide in
Sacha Turkot I don’t necessarily care for the design, but I do like that color.
I have to agree with your assessment of the color combination. I don't usually place significant value on the cosmetic impression, function and ergonomics being so much more important in a tool than looks, but it would weigh a little for me in this case.
I must say, my initial excitement at seeing that Snap-On has a multi-tool was immediately extinguished upon learning that Gerber makes it for them. It is disappointing that they haven't come up with a design of their own and that disappointment is multiplied several fold by their choice of Gerber over any of the better multi-tool makers.
Can you imagine if they had partnered with Leatherman with a specialized multi tool? That could’ve been pretty cool.
Good video, new sub here 👍🏻🙂
Thank you sir, and thank you for your subscription.
Wow amazing looking design edc tool!!!
Thanks for watching.
Nice et excellent review !!!!
Thank you very much. Thanks for watching too.
You’re doing a review and it’s the first time you’ve used the scissors? Stopped watching.
Maybe you should go find a weekend warrior wannabe channel then.
@@txtoolcrib
Or simply someone who has used a tool so they can have a valid opinion. Yours is not a review, it seems it’s just the irrelevant initial observations of some ass hat who likes the sound of his own voice.
Actually it’s done by someone who knows more about tools then you can learn in three lifetimes. I think you might wanna go check out some more of my videos before running your mouth.
@@txtoolcrib
You have nothing to base that on, however, thanks to your own admission you’re reviewing something you’ve never seen or used. Therefore any other knowledge you claim to have is irrelevant, you know nothing about this tool and yet you’re arrogant enough to review it. How important you must be. Or maybe just another American Wanker.
Lol. I know more about tools and industry than you could learn in three lifetimes. You’re right about me being arrogant, I’ll give you that. However there’s quite a difference between someone being arrogant and someone being arrogant with the ability to back it up.
Hi
Oh man. I love snap on
What do you think of that multi tool?
StrapOn...Over priced BS
I agree that they are overpriced, but they make some really great automotive tools. Just have to give up your first born to buy them.
I’ve got one snap on breaker bar that I’m not sure where it came from. I just like there stuff. If I could afford more of it I’d have it.
Thank you for introducing this beautiful and rare multitool! I haven't purchased this product because it was too expensive in the past Are snap-on and GERBER affiliated with each other? GERBER MP600 Military Replacement Versions of Plier MP600 PRO SCOUT Replacement Saw Blades and Composite Blades The color and sheath of the handles have been changed, but the color is too expensive. It is difficult to obtain a separate saw blade for the GERBER saw blade adapter that is not available. If you were equipped with a saw blade adapter of TOOL 300 EOD, you would be loved as a modified multitool.
I don’t know much about this particular multi tool. This was actually my first time seeing one up close. I didn’t really ever pay that much attention to it because I don’t care for OTF plier designs. To my knowledge, the companies are not affiliated in any way. Gerber is contracted to make this tool for Snap-On, that is the extent of their relationship.
@@diezelle57 Cher diezelle57 Merci ~! Enchanté de vous rencontrer ici. Bonne journée aujourd'hui ^^
@@diezelle57 Avoir un beau rêve ~!
Great vid as always bud. I enjoyed it and have a couple of older Gerbers. I wonder why Snap On didn't partner with Leatherman. I am with you in that I can't stand the carbide cutters..Keep the videos coming. We enjoy them.
DBoom70 I wish Leatherman had partnered with them instead. I think that could have been a very special multi tool.
Can I have a Shout out
I still have not found a multi-tool that compares to my "Swisstool"
The only multi tool that compares to the Swiss tool is the Leatherman Surge in my book.
@@txtoolcrib Agreed!
I agree.
Yesterday newspaper! 🙄...This tool came out few years ago, there are TH-cam video reviews from 2016
You’re right. The Surge has been out since 2013 on the second generation too. Most of the multi tools I own have been out for multi years. What’s your point?
@@txtoolcrib One too many videos already.
Well, sorry you feel that way.
Rien que la vérité Who cares if he makes a different review??? Haven’t you noticed the same exact thing with EVERY OTHER THING ON TH-cam!!??
Look up the new Toyota Supra for example......have you made comments on every person who “wasn’t the first to review it”. TX Toolcrib makes very good videos. I’d rather watch his reviews than many others. To each their own but....if repetition or product saturation bothers you....you should NOT be on TH-cam. Lol🤣🤣🤣🤷🏼♂️
Rien que la vérité 5 billion videos are watched daily on TH-cam. Good luck having a private conversation or comment. 🤣
4:52 are you blind? Cant you see that the blades need to be changed??
Apparently I must be blind.
TX Tool Crib yes clearly
andre92h I am surmising that you are unfamiliar with sarcasm. The cutters were brand new, they are just worthless.
TX Tool Crib its a big chip missing
andre92h They are designed that way. Meant to be a hard wire cutter.
Gg
Thanks