Hey i have a 2012 vnl. Its not doing anything when i try to crank it. Its giving me this message along with check engine light. J1939 communication error with engine ECU. Any idea what could it be?
Hey what problems did the truck have before tje ecu replacment How often does the ecm go bad for a d12. keep loosing power to my ecm and my truck shuts down randomly i replaced harness still does it
That was a wonderful uplifting video due to the music, it hit me sideways and calmed me down LOL I run the mail back and forth subcontractor curious is that the same way on the older 2006 model, LOL !!! Ty.4sharing awesomely done!!
Hi where could I buy diagnostic tool scanner for volvo penta tad1344ge ecu.. Our genset got alarm of ecu warning shutdown.. So the mcb keep on tripping.. Need to find the fault of ecu,
Hey man my truck is a 2012. It was running fine with check engine on. I went on vacation for a week and when I try to start it the lights would come on, but it won’t crank at all. The only message i get it Maintenance required vehicle Ecu. And j1939 Communication error with Engine ECU. Please help me out with this if you have any idea what could it be
Hey did you figure out the problem with your j1939 data link erratic iam having kinda the same problem my engine light keeps popping up then it make my transmission throw a code j1939 data link commutation
You have to see if they are the same hardware number on the ECU. If they are the same then you can use it. I think you can check with the dealer if you give them your vin number. Hope this helps! .
From our experience only a dealer can program a ECU, You may be able to find an ECU from a salvage yard but it may not be programmed correctly for your type of truck.
Hey i have a 2012 vnl. Its not doing anything when i try to crank it. Its giving me this message along with check engine light. J1939 communication error with engine ECU. Any idea what could it be?
Hey Driver i know this a long shot but iam having a problem with my truck with j1939 data link erratic by chance can you tell me what you did do fix your truck and what caused the problem
Yes the Engine ECU needs to be reprogrammed with Volvo Premium Tech Tool. This will reinstall the original file to the ECU. If you plan to reuse an ECM from another truck then you would still need to reprogram due to the configurations. Let us know if you need anything else!
Fuel will leak out not antifreeze... It is cooled by a fuel line. So no need to worry about it once you disconnect it. Just make sure you replace / reinstall the copper washers.
@@otrperformance Thank you for information. I bought new one but it requires be programmed. Can I start engine with it and drive to the shop where they will program it?
@@johnysilver1853 A brand new one will need to be reprogrammed if it's straight from the dealer. You can try to see if your unit starts after installation. If it does not start then you need to program it using Tech Tool. I still recommend doing a reprogram because all of your stored values off your existing VIN or ECM is flashed to your chassis ID per vehicle spec. Let us know if you need any other help!
@@otrperformanceThank you for following. I working on getting Tech Tool on my laptop. I want to find out where I can get procedure manual for reprogramming new ECM from dealer.
We wouldn't be able to give you an exact price as every truck is different. We recommend contacting a couple different shops and see what they would charge.
I have a 2007 d12 volvo that has a light on the dash saying (check engine ecu next stop). Do you know what can be causing this? Also is it bad to drive the truck still
Hi where could I buy diagnostic tool scanner for volvo penta tad1344ge ecu.. Our genset got alarm of ecu warning shutdown.. So the mcb keep on tripping.. Need to find the fault of ecu,
Keep up to great work on the videos
Hey i have a 2012 vnl. Its not doing anything when i try to crank it. Its giving me this message along with check engine light. J1939 communication error with engine ECU. Any idea what could it be?
Really well made, very helpful. Thank you so much
Question does the ground on the ECU screw to the block or on top of the ecu bottom corner?
Hey what problems did the truck have before tje ecu replacment How often does the ecm go bad for a d12. keep loosing power to my ecm and my truck shuts down randomly i replaced harness still does it
What did you do with your truck my truck shuts down randomly too I did not change harness yet maybe it is ecu ??
That was a wonderful uplifting video due to the music, it hit me sideways and calmed me down LOL I run the mail back and forth subcontractor curious is that the same way on the older 2006 model, LOL !!! Ty.4sharing awesomely done!!
I subscribed... again ty.4sharing!
😂🤣😂🤣😂
Hi where could I buy diagnostic tool scanner for volvo penta tad1344ge ecu.. Our genset got alarm of ecu warning shutdown.. So the mcb keep on tripping.. Need to find the fault of ecu,
Sorry, The diagnostics tool is currently only available for Semi Trucks.
Thanks 🙏🏻
Hey man my truck is a 2012. It was running fine with check engine on. I went on vacation for a week and when I try to start it the lights would come on, but it won’t crank at all. The only message i get it Maintenance required vehicle Ecu. And j1939 Communication error with Engine ECU. Please help me out with this if you have any idea what could it be
Hey did you figure out the problem with your j1939 data link erratic iam having kinda the same problem my engine light keeps popping up then it make my transmission throw a code j1939 data link commutation
Good day! Tell us the 2017 VOlvo FMX D13C 420 engine. Burned out control unit! can we supply with FH 2012? D13A 480
You have to see if they are the same hardware number on the ECU. If they are the same then you can use it. I think you can check with the dealer if you give them your vin number. Hope this helps! .
where can I get ECU and get it program for my truck 2013 VNL D13 with Ishift.
From our experience only a dealer can program a ECU, You may be able to find an ECU from a salvage yard but it may not be programmed correctly for your type of truck.
I got an 2007 can it b replaced with one from an 2002?
Hi Jose, We wouldn't recommend it as they changed the electrical systems in 2007 and they are very different compared to a 2002 truck.
@@otrperformance thanks
Can a leaking ecu throw injector code. Which side of motor is this?
Buenas noches disculpe dónde consigo un módulo Volvo D 12
How bad will it run with a New ECU in it?
Will it have to go back to the dealer for programming?
Les Garten it will have to be reprogram I had my did soo it's best if you have it did at dealer if you don't have computer with volvo program to do it
Les Garten what was the cost
?
how much for including labor?
@@damarisrivera3491 Es fácil no tienes porque pagar!
Hey i have a 2012 vnl. Its not doing anything when i try to crank it. Its giving me this message along with check engine light. J1939 communication error with engine ECU. Any idea what could it be?
Hey Driver i know this a long shot but iam having a problem with my truck with j1939 data link erratic by chance can you tell me what you did do fix your truck and what caused the problem
After installing the new one .. does it need to be reprogrammed?
Yes the Engine ECU needs to be reprogrammed with Volvo Premium Tech Tool. This will reinstall the original file to the ECU. If you plan to reuse an ECM from another truck then you would still need to reprogram due to the configurations. Let us know if you need anything else!
Thank you so much for the reply.. I really appreciate your videos.
@@otrperformance once you get a new ecu reprogrammed. Does that automatically reactivate your DEF? And would you have to get the DEF deactivated again
@@juanwaysniper083 Yes, the original file from OEM has DEF activated depending on your emission years. Hope this helps!
Me comentan que no funciona si no se programa si es nueva la que se intala
Why don't I have headlights marker lights and turn signals on my 2013 Volvo
Thank you
Why are two washers needed? Will 1 work?
Definitely not it will leak fuel..washers are needed
Will all the antifreeze leak out if I disconnect it?
Fuel will leak out not antifreeze... It is cooled by a fuel line. So no need to worry about it once you disconnect it. Just make sure you replace / reinstall the copper washers.
@@otrperformance Thank you for information. I bought new one but it requires be programmed. Can I start engine with it and drive to the shop where they will program it?
@@johnysilver1853 A brand new one will need to be reprogrammed if it's straight from the dealer. You can try to see if your unit starts after installation. If it does not start then you need to program it using Tech Tool. I still recommend doing a reprogram because all of your stored values off your existing VIN or ECM is flashed to your chassis ID per vehicle spec. Let us know if you need any other help!
@@otrperformanceThank you for following. I working on getting Tech Tool on my laptop. I want to find out where I can get procedure manual for reprogramming new ECM from dealer.
No it did not start before dealer programming
Comment dépanner ce genre de'Ecu
How much does it cost to replace the ecu
We wouldn't be able to give you an exact price as every truck is different. We recommend contacting a couple different shops and see what they would charge.
Will a 97 ecu work for a 99
Can someone tell me the Part# Please?
Have a 01 volvo vnl acceleration pedel not working put New pedal in still nothing
I have that same problem. Did you end up finding the problem out?
Can Volvo engine run without the ECU?
No it can't run because of the Electronic Fuel System that is controlled by the ECU. Hope this helps!
I have a 2007 d12 volvo that has a light on the dash saying (check engine ecu next stop). Do you know what can be causing this? Also is it bad to drive the truck still
OTR Performance EPG1 is the code I am getting. Says electrical fault active?
raul robles did you fix your problem about Volvo ???
Did you fix it what's was the answer...Thanks
@@otrperformance could you fix it?currently have a problem with 06 d12 volvo it says no connection to engine ecu
Makes no sense why fuel has to flow around the exam how about they just mount it to the body of the truck smh 🤦🏾♂️
افتح ترجمةالعربية
Not very informative, but the music was great.
Hi where could I buy diagnostic tool scanner for volvo penta tad1344ge ecu.. Our genset got alarm of ecu warning shutdown.. So the mcb keep on tripping.. Need to find the fault of ecu,
Sorry, The diagnostics tool is currently only available for Semi Trucks.