Sir...when I cold start the vehicle the RPM needle goes to 2000RPM and then comes back to Zero during ideal and only goes up when I press accelerator of the vehicle, why is it not staying on 800-1000RPM during ideal?? .....Please Help thanks
At 0 RPM your engine is not running. An Engine at idle runs at approximately 700 to 900 RPM. In two minutes of running a engine has reached “closed loop”. Closed loop means it’s out of default mode and is adjusting fuel mixture based on Oxygen sensor input. The engine is still not fully warmed up or at operating temperature but you should start driving it. You do not want to let an engine idle long enough to reach operating temperature. You should start driving it as soon as you start it , unless you need to defrost the windshield. Also you should once check your oxygen sensor as it may be at fault. Maybe this may help you.
@@eshaansharma8426 Thanks for the Information so you mean the oxygen sensor has to be replaced or Cleaned? Hope it's not a wiring problem or engine tuening issue as it's a BSIII restored vehicle and the dealer from whom I have bought must have played around? As soon as I press the accelator paddle the RPM goes up 1000+ and once i leave the paddle it comes down to zero whereas there is no issue in engine running.Also the engine gets quite heated up while driving the gypsy in the city.What can be done?....Thanks
@@manimenon5403 I hope so that checking the oxygen sensor will help also you can recheck the connection and wiring of the meter. Taking the help of a mechanic is advised.
Sir ji , you could have bought a obd 2 bluetooth dongle and used an old phone with a Torque pro software. It will not only show your RPM but a whole lot of other useful parameters on the phone display . Anyway good installation ,👍 couldnt understand the function of that blue relay though .
RPM मीटर लगाने का कुछ खास फायदा नहीं दिख रहा है। क्या फायदा हुआ इस पर वीडियो बनाइये। ज्यादा गैजेट का उपयोग गाड़ी में उलझन पैदा करता है। (ये व्यक्तिगत विचार है)। इस लिए पुनः अनुरोध है आप इस मीटर को अच्छे से test कर फायदे और नुकसान पर वीडियो पोस्ट कीजये।
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [Official MV]](http://i.ytimg.com/vi/NBw1jF342vw/mqdefault.jpg)
Relay konsa hai
Jo chizz apke sath ho rhi h same prblm hai relay btaiye konsa lena hai
Bhaiya rply kre
kya tachometer abhi bhi work kar raha hai ??
Yes still working and in good conditions
Sir...when I cold start the vehicle the RPM needle goes to 2000RPM and then comes back to Zero during ideal and only goes up when I press accelerator of the vehicle, why is it not staying on 800-1000RPM during ideal?? .....Please Help thanks
At 0 RPM your engine is not running. An Engine at idle runs at approximately 700 to 900 RPM.
In two minutes of running a engine has reached “closed loop”. Closed loop means it’s out of default mode and is adjusting fuel mixture based on Oxygen sensor input.
The engine is still not fully warmed up or at operating temperature but you should start driving it. You do not want to let an engine idle long enough to reach operating temperature. You should start driving it as soon as you start it , unless you need to defrost the windshield.
Also you should once check your oxygen sensor as it may be at fault.
Maybe this may help you.
@@eshaansharma8426 Thanks for the Information so you mean the oxygen sensor has to be replaced or Cleaned? Hope it's not a wiring problem or engine tuening issue as it's a BSIII restored vehicle and the dealer from whom I have bought must have played around? As soon as I press the accelator paddle the RPM goes up 1000+ and once i leave the paddle it comes down to zero whereas there is no issue in engine running.Also the engine gets quite heated up while driving the gypsy in the city.What can be done?....Thanks
@@manimenon5403 I hope so that checking the oxygen sensor will help also you can recheck the connection and wiring of the meter. Taking the help of a mechanic is advised.
@@eshaansharma8426 ok...thanks
Same problem in my gypsy please suggest
Gypsy ke parts asaani se mil jaate hain😁
Gr8
Bhai
Badhiya baat ha
Wow
Anka arvind bhai
Bro where can we buy this ,any online link to buy will be helpful
Online bhi ha par
Nearby Workshop wala banda will be a good option
Sir ji , you could have bought a obd 2 bluetooth dongle and used an old phone with a Torque pro software. It will not only show your RPM but a whole lot of other useful parameters on the phone display . Anyway good installation ,👍 couldnt understand the function of that blue relay though .
Thanks for suggestions...
Is this Gypsy or Gypsy king?
This is gypsy king 413w
RPM मीटर लगाने का कुछ खास फायदा नहीं दिख रहा है। क्या फायदा हुआ इस पर वीडियो बनाइये। ज्यादा गैजेट का उपयोग गाड़ी में उलझन पैदा करता है। (ये व्यक्तिगत विचार है)। इस लिए पुनः अनुरोध है आप इस मीटर को अच्छे से test कर फायदे और नुकसान पर वीडियो पोस्ट कीजये।