3. How to section a Hexagonal Pyramid and draw true shape of section

Download the Manas Patnaik app now: cwcll.on-app.i... Download the Manas Patnaik app now: storage.google...
Section of Solids (ENGLISH) Playlist: • SECTION OF SOLIDS || E...
Section of Solids (HINDI) Playlist: • Chapter 10_Section of ...
Engineering Drawing (ENGLISH) Playlist: • Engineering Drawing | ...
Engineering Drawing (HINDI) Playlist: • ENGINEERING DRAWING ||...
#manaspatnaik
@ManasPatnaikofficial
@btechplus
#sectionofsolids
#axisinclinedtoHP
#hexagonalpyramid
#engineeringdrawing
#engineeringdrawingenglish
#BEFirstyear
#btechfirstyearv
A hexagonal pyramid, base 30 mm side and axis 65 mm long is resting on its base on the HP with two edges parallel to the VP. It is cut by a section plane perpendicular to the VP inclined at 45o to the HP and intersecting the axis at a point 25 mm above the base. Draw the front view, sectional top view, sectional side view and true shape of the section.

[@vageeshram29]

this was the most explained video which I have seen

[@ShubhamGupta-xf6xi]

kitna helpful video hai
thank you sir

[@jaysinhdabhi8895]

Tyvm for explaining the topic in that much deep manner sir
Really appreciated that 🙏🙏💐
It really helped me out in sharpening my designing skills

[@Whutttttttttt]

This was very helpful sir. Keep it up.

[@ManasPatnaikofficial]

+Phuntsho Wangmo
Hi Phuntsho....
Thanks for appreciating the content....
All the best and do let your friends know about this channel so that they can also benefit...

[@ayushagarwal69]

very helpful video sir , but the sectional side view which was asked in the original question is missing in the answer i think?

[@rishithrao221]

I liked it very much sir.
I shared nearly 100 of my friends...
Fantastic explanation sir..

[@ManasPatnaikofficial]

Thats awesome Rishith...
Keep learning and spreading goodness...
All the best....
By the way this is the entire playlist of Engineering Drawing with pretty much all topics covered:
th-cam.com/video/WG6H2pISUzQ/w-d-xo.html

[@rishithrao221]

Definitely sir.....

[@VENUGOPAL-uh5zu]

Dear Manas Ji I am watching all your tutorials it is really very _______very Help full, please try to make some videos on sectional orthographic projection, thanks

[@ManasPatnaikofficial]

+VENU GOPAL
Ya sure.....
Even i was thinking about the same from a long time.......

[@arijitghosh8064]

Sir your videos help me a lot in improving my technical drawing skills thank you.👍❤

[@ManasPatnaikofficial]

Hi Arijit..........
Keep learning and do let your friends know about this channel so that they can also benefit...
All the best

[@THE_BEASTOFFICIAL]

You didn't draw side view

[@akashpriyadarshi3965]

where is sectional side view??

[@shaikabutalhah8630]

THANKS SIR A LOT...YOUR VIDEOS ARE REALLY HELPFUL🥰🥰😄🙂🙂

[@ManasPatnaikofficial]

All the best shaik......i am glad that my videos are helping you

[@rohitkumarmondal3748]

sir sectional side view was also to be drawn as far the question mentioned

[@srinuganthala3840]

Yaa S.S.V is also mentioned, but sir I think forgot....I think it's our homework 😅

[@-EE-GIRIDHAR]

Sectional top view sometimes
Need to draw on left not on right why? & how we know it

[@vikashkumar-kn2ck]

As given in question two edges are parallel to V.P but in solution two edge are parallel to XY line and that XY line is HP not VP please clear it.

[@powerup_engineer]

a square pyramid of base 30th side and axis 4 mm long is resting on the HP on its base such that an edge of the base parallel to the VP it is cut by a horizontal section plane bysecting the axis then draw the development of surface

[@preyanshusinha7875]

Wah!😍 You are So amazing 💝 gift from heart.
You solved my problem.

[@ManasPatnaikofficial]

Glad I could help Preyanshu.........All the best....
😀Do share this channel and its playlist with your friends.
1. Engineering Drawing Playlist: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Mechanics Playlist (OLD): th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
3. Engineering Mechanics Playlist (NEW 2023-2024): th-cam.com/play/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP.html
4. Mechanics of Solids Playlist: th-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines / KOM / DOM Playlist: th-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. AUTOCAD Playlist:
th-cam.com/play/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G.html
7. Machine Drawing Playlist: th-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Second Channel for Hindi Audience: @btechplus
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@sudarsankishan5135]

thanks sir please sir keep the video are in series or give the link below of that series

[@nitinsrinivasan4900]

When do we know that whether we should consider the intersection point of the axis and the sectional plane ?

[@shuvbhowmickbestin]

4:20
Shouldn't that be hexagonal pyramid?

[@mitrex1469]

4:15

[@JaspreetSingh-xd2lz]

what is the distance between the line 6-5 and the reference line xy?

[@olanpinto358]

Can you please do a video on this question ,
A pentagonal pyramid is testing on one of its base Corners on the ground , such that it's 30 mm base side on top is parallel to HP . ITS 65 mm long axis is normal to VP . It is cut by a sectional plane perpendicular to VP and inclined 60° to the HP such that it bisects the top base edge . Draw it's front View and sectional Top view and obtain true shape of the section .

[@kadem.chatarjikadem.chatar9202]

Thanks for sir

[@nikhilwadkar3551]

If you asked this question " edge are perpendicular to vp , what will be figure ?

[@prafullatripathi8039]

sir when edges perpendicular to VP ...how can be solve it

[@fine5389]

Mila kya iska answer pls guide

[@chandrashekar-ey3jo]

bro where is side veiw

[@ManasPatnaikofficial]

Chandra i forgot to draw that while making the video....
Anyway i am sure that guys will be able to work that out...

[@sathaiahchannram7953]

When there is single point on base when we extend down,how to plot points. It is in the case of pantgonal pyramid

[@rahulpatel4875]

Thank you sir

[@ManasPatnaikofficial]

Hi Rahul.......
You are welcome....
All the best and do let your friends know about this channel so that they can also benefit...

[@rishabhdwivedi918]

Sir what about side view

[@purnadityasuvvari5053]

That's from ur side😂🤣

[@monishav7053]

Sir ,you got a septagon for the given hexagonal pyramid qn in stp and ssv and in true section? Is that even possible?

[@jefferyhumtsoe8828]

Me to my kids:
And that's how I passed my ED exam with ease

[@paranjay4776]

But we want Sectiona side view and u draw frontview🤔🤔

[@kadem.chatarjikadem.chatar9202]

Very explain sir very good

[@pragaticons.8681]

thanks sir for explaining in English because my E.D.use to explain all technical terms in Hindi from which I am not able to understand

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html

[@prabhavpadotra4358]

Why don't we have g' and h' corresponding to 5-4 and 3-4 just like a' and b'. Shouldn't it be having 2 points?

[@meghadwivedi3314]

Sectional side view not shown?

[@mayurgalaxy4892]

What is different orthographic projection or isometric projection in taiyarcal

[@hemanthsai5640]

Sir how to understand the question

[@basharatkhan7700]

In hexagonal pyramid the apex or vertex is the same thing ?

[@454humakhalid9]

Where is sectional side view

[@tanaymehendale4714]

Hi Sir, can u make a video about How to decide cutting plane’s position when true shape of the section is given in the question???

[@yagnasriparsi7070]

Sir, in sections of
Solids topic could you help me how to do problems of cube ?

[@abhinavanand6108]

Thanku sir for help

[@sunilpatil8774]

sir what if sectional plane makes an w.r.t the vp, then how we should perform the problem??? do we have 2 make sectional plane through top view
pls reply sir , i have paper tomorrow

[@_JaisuriyaY]

A hexagonal prism of base 30mm side and axis 60mm long is resting on its base on HP with a base edge parallel to VP. It is cut by a plane perpendicular to VP, inclined 35° to HP. Draw the sectional top view and front view of the prism. Also draw the development of the complete surface
Can u give the answer for the above question

[@rohithreddy-paripelly]

Easy one

[@ballarysaikiran4980]

Where is sectional side view?

[@KingOfking-yl9fv]

Video is not perpendicular hp and inclind vp

[@chandan_kumar3075]

But sir i have a concern that section top view of a hexagonal pyramid should be hexagon na????in this drawing you have made a heptagon as a sectional top view??

[@ManasPatnaikofficial]

Thats not necessary Chandan....
Think about it

[@chandan_kumar3075]

Manas Patnaik i got it ,btw thanks a lot Manas sir you helped me a lot ,my marks in ED is really impressive.

[@generalinfoabidhassan146]

cd line cuts hexagon at 3 points...????

[@akashpakkurthi564]

where is the sectional side view sir ????

[@clubgenius2736]

Thnx bro

[@ashishlalwani2713]

7 sides kaise ban rahe apke

[@BenDevTech]

Please which software are you using to create this????

[@lonebeastgaming]

Autocad

[@vaishnavisatbhai1648]

Sectional view

[@MonalisaSana]

Where is left side view 17:49

[@nandkishornaitam4202]

Sir please give it's development

[@muddasanimahesh5623]

I didn't understand cutting point inhexagonalpyramid c'&d'

[@eforengineering70]

How you get cutting plane i can't understand.😢

[@niharikaganta6068]

Sir edges are parallel to VP right...the. how come u have taken it through XY plane

[@ManasPatnaikofficial]

Ya edges are parallel to VP thats y they have been taken as parallel to xy line in top view......
Priyanka just think about this.....

[@achyutanand8671]

Tq sir

[@pavanvellanki3275]

Same problem With two cutting planes

[@eduveer1511]

The sectional top view has 7 side .in ur drawing ....Is it possible....?

[@pawansinghla2149]

My question Is same

[@ayushagarwal3628]

yes it is possible

[@pawansinghla2149]

How it is possible ?and sectional top view can't touch the corner of top view

[@srinuganthala3840]

Yaa it's correct...bc/ac/ce/eg/gf/fd/db...

[@Chanakya_G7]

Where the hell is SECTIONAL SIDE VIEW dude

[@beiweiwei9666]

But why isn't the whole pyramid taken into consideration???!

[@ChitraJagadeesh-rz7st]

Side view?

[@KrishnaAjith27]

Can you please do a video on designing of machine parts

[@asandgh]

I want the end elevation

[@farheenreshi]

You have left this question incomplete..where is the sectional side view?

[@chandankumarchauhan136]

Sir where's the sectional side view

[@dailypicks619]

very well explained.....

[@sukeshyarra9852]

what saw the software u have used

[@ManasPatnaikofficial]

Sukesh Yarra its autocad

[@mohammadfaisalahmed8345]

sir please upload the video of a question a hexagonal pyramid of base side 30 mm and height 75 mm is resting on the ground with its Axis vertical it is cut by a plane in client at 3 degree to the HP and passing through a point to on the exercise at 20 mm from the vertex draw the sectional front view top view and true shape plz Sir fast...

[@adrikamondal1004]

IN THE QUESTION YOU ARE WRITING SECTIONAL SIDE VIEW AND IN THE VIDEO YOU ARE NOT DOING IT NOT EVEN TELLING PEOPLE TO LEAVE SPACE LIKR WHERE TF AM I SUPPOSED TO GET SPACE IN THE RIGHT AFTER DOING THE WHOLE ASS DRAWING ALSO IF YOU AREN'T DOING IT WHY SHOW IT IN THE QUESTION AND THUMBNAIL WITH A DUE RESPECT WHAT IS WRONG WITH YOU

[@Sandhya26475]

A bit of a doubt in the left side view of this section, the top vertice is going beyond 65mm in the side view. I hope that's an okay diagram while drawing

[@ManasPatnaikofficial]

Well....I should fall in line with its corresponding front view.........
May be the line got slightly inclined....

[@NidhiKumari-ov1qr]

Sir aap ko khashi ho raha h kahi corona to nhi h sir

[@dipenprasad6737]

Bohot hard😅😅

[@mohdmargoob6297]

nice sir

[@ManasPatnaikofficial]

+Mohd Margoob
Hi Md.Margoob......
I appreciate your comments....
All the best
And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....

[@mohdmargoob6297]

yeah sure I'll be sir ....
really very helpful video sir

[@inderpalsingh3387]

sir ji sectional side view is missing and kindly be low on ads

[@amoghp6347]

How to make compass arcs in autocad?

[@md.dastagir2192]

Hello sir
what is the difference between auxillary view and true shape ?

[@ManasPatnaikofficial]

You get the true shape on an auxillary plane....
that true shape can also be referred to as auxillary view

[@Tnvrahmed98]

Sir can 45 degree can be anticlockwise also?

[@ManasPatnaikofficial]

Yes u can

[@luhtaubabr2136]

where is the sectional side view?

[@sanskarware2060]

Where is the sectional side vew

[@vaibhavsaxena1482]

No sectional side view 😒😫

[@deepakkafle2046]

Have a look you true section is heptagon

[@atharvmorbale2385]

Great!

[@mastermindgaming290]

bro this side not cornar 😅

[@sandhyanaik2913]

Excuse me sir where is sectional side view

[@sanjayraut8422]

Thanks

[@Siva-cp2ip]

We take hexagonal pyramid by finally the top view we get seven sides how we Get small doubt

[@shudhanshushekhar2322]

thanks sir

[@MonalisaSana]

Iem uem attendance here

[@shibshankarmahata2968]

Development???

[@dikshasoni2449]

Mast

[@Birju_Maharaj]

Thnks

[@abhinavanand6108]

Thanku

[@deepakkafle2046]

wrong

[@allinone-hz4to]

Abe Hindi me bol na

[@ManasPatnaikofficial]

Thodi Tameez bhi sikh lo. Haar baat ko poochne ka ek tarika hota hai.
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: th-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html 2. Projection of Point in Hindi: th-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html 3. Projection of Line in Hindi: th-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html 4. Projection of Plane in Hindi: th-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html 5. Projection of Solid in Hindi: th-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html 6. Scales Hindi-Urdu: th-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html 7. Section of Solids in Hindi: th-cam.com/play/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC.html 8. Development of Surfaces in Hindi: th-cam.com/video/8qpTtaTSdBA/w-d-xo.html

[@B.D.M1999]

Where is sectional side view

[@basavarajbiradar305]

thank you sir

[@hemanthsai5640]

Sir how to understand the question sir

[@samisoniniubalavu166]

Lol pliz learn your basic

[@vardhmansoni1999]

where is sectional side view ?

[@Komalpriya12334]

Yes where's sectional side view

[@024_challakirankumar2]

Where is the sectional side view?..