Roxon and Olight are crushing it. I have a lot of both and I just got the OKS2. Nice little tool. The scissors are great. Just get it for the scissors! I have their bit kit and it would be better if it had a magnet to hold it and the bit in place. It works but meh. Still nice tool. Nice review.
Thank you I appreciate that for sure! You’re right they make a pretty awesome duo when it comes to collaboration. I said the same thing about the bit kit. It’s really nice to have a bit kit to be able to use whatever bits I want but a magnet would be nice. I still love the tool though! Thanks for watching!
How goes it bud. I just received my OK S2, and noticed my little push to deploy/ pull to unlock lever, is a little loose. I mean everything still works fine, but that clicking noise is a bit annoying at times. Is that the case with yours ?............otherwise this thing rocks ! New subscriber here.....😄
Thank you for the sub I really appreciate it. As for the loose lock lever mine is not at all. It’s nice and tight maybe you could give it a slight turn with an Allen key or torx bit maybe that will fix it up. Other than that their customer service is awesome they will take care of you
Ya, I kinda thought it shouldn't be that way. All Olight products I own are meticulous with their fit and finish. This one must have just slipped through. I'll definitely give them a call tomorrow, there's no way to tighten that little knob from the outside, and I'm sure as hell not going to disassemble and dive in....lol. Thanks for getting back.
@@MegaFrank1960 no problem at all I didn’t get a lot of time to play with it yet to see if that was even a screw but I guess not they will take care of it!
I just ordered the bit kit from Roxon, which will take this tool to the next level. Thanks for the heads up on that ! ( Btw....I was just watching "Wayne's Sharp World" s review on this exact model, and his lever button appeared loose too, at 7:25 minute marker in ) I had little luck speaking with who seemed like a inexperienced younger lady at Olight CS today. I'll try back after the weekend
@@MegaFrank1960 I went and got my roxon ks2 out and actually there is a slight bit of back to forward wiggle on the lock I never noticed before. It doesn’t make any noise but it does it also. Maybe it is just part of the design
Thanks for the info. I only have a few cold steel knives and a few crkt I believe the crkt models I have are 8cr13 Mov. Another person told me victorinox uses that 1.4116 steel on their knives. I’m not sure about the validity of that statement but I might look it up right now!
@@whitetailsurvival2430 i use the cold steel engage as a beater knife and that has 1.4116ss and i use the crkt hvas for a dinner knife🤣 and thats also 1.4116ss i believe ... and any time may aswell comment before youtube stops all knife content lol
@@martinbanks2419 yes your right. Knife and gun content is very edgy on here for some reason. It’s getting ridiculous the fear people have on inanimate objects. The biggest problem is that people cannot draw their own conclusions and whatever they are told they just believe it. I would be more afraid of a McDonald double cheeseburger or getting behind a wheel of a car before I was worried about someone with a knife 😁
The modern day world is going all backwards ... there happy to allow videos of people shooting up a class room of kids and other crimes ... but dont like people showing new knives and edc gear 🫣
I have early access passes to give away if your in the group on Facebook just make a post saying you need them and I will send you one next time I have a few to send now. It’s an awesome tool I think a lot of people will like it
Just got mine yesterday (Wed) delighted with it, do I need it, well that's a different matter. I too love Olight and have far too many. Keep up the good work. Peace from Scotland
@@dan6pthank you that’s awesome to see comments and views coming in from Scotland! I have quite a few olights myself. It’s great. Plus I love the roxon ks2 anyway to begin with so it was a no brainer to pick this one up. I think I’m going to get another for a spare when they come back in stock
@@whitetailsurvival2430 I appreciate the offer, but I'm not on Facebook. I'll try to pick one up during another Olight sale. Maybe they'll even offer the version with the bit kit at some point (like the Roxon KS2E).
@@garyk4017o I understand facebook isn’t for everyone. I can send early access passes only to an email as long as you are logged into Olight store but I would not post that in here 😂
When you have over a hundred of these things they start to blend together. I carry the ks2 a lot and it’s doesn’t matter how often I carry it I will still try to release it with the back lock. I carry a T4 everyday at work so I have a habit of reaching for the sliding back lock for every tool.
![[DRIP] ‘Woke Up In Tokyo (RUKA & ASA)’ PREVIEW](http://i.ytimg.com/vi/QN44lcR_VkI/mqdefault.jpg)
I like the usefullness of this tool in either an urban or rural setting. In the city or out camping.
Yea either place works the saw gives it an outdoor edge or even to make small notches and whatnot on a job site
Just ordered it. Thanks!
No problem at all I use mine all the time it’s great
Roxon and Olight are crushing it. I have a lot of both and I just got the OKS2. Nice little tool. The scissors are great. Just get it for the scissors! I have their bit kit and it would be better if it had a magnet to hold it and the bit in place. It works but meh. Still nice tool. Nice review.
Thank you I appreciate that for sure! You’re right they make a pretty awesome duo when it comes to collaboration. I said the same thing about the bit kit. It’s really nice to have a bit kit to be able to use whatever bits I want but a magnet would be nice. I still love the tool though! Thanks for watching!
How goes it bud. I just received my OK S2, and noticed my little push to deploy/ pull to unlock lever, is a little loose. I mean everything still works fine, but that clicking noise is a bit annoying at times. Is that the case with yours ?............otherwise this thing rocks ! New subscriber here.....😄
Thank you for the sub I really appreciate it. As for the loose lock lever mine is not at all. It’s nice and tight maybe you could give it a slight turn with an Allen key or torx bit maybe that will fix it up. Other than that their customer service is awesome they will take care of you
Ya, I kinda thought it shouldn't be that way. All Olight products I own are meticulous with their fit and finish. This one must have just slipped through. I'll definitely give them a call tomorrow, there's no way to tighten that little knob from the outside, and I'm sure as hell not going to disassemble and dive in....lol. Thanks for getting back.
@@MegaFrank1960 no problem at all I didn’t get a lot of time to play with it yet to see if that was even a screw but I guess not they will take care of it!
I just ordered the bit kit from Roxon, which will take this tool to the next level. Thanks for the heads up on that ! ( Btw....I was just watching "Wayne's Sharp World" s review on this exact model, and his lever button appeared loose too, at 7:25 minute marker in ) I had little luck speaking with who seemed like a inexperienced younger lady at Olight CS today. I'll try back after the weekend
@@MegaFrank1960 I went and got my roxon ks2 out and actually there is a slight bit of back to forward wiggle on the lock I never noticed before. It doesn’t make any noise but it does it also. Maybe it is just part of the design
Cold steel use that 1.4116 ss on there affordable knives ... also crkt use it on some knives
Thanks for the info. I only have a few cold steel knives and a few crkt I believe the crkt models I have are 8cr13 Mov. Another person told me victorinox uses that 1.4116 steel on their knives. I’m not sure about the validity of that statement but I might look it up right now!
@@whitetailsurvival2430 i use the cold steel engage as a beater knife and that has 1.4116ss and i use the crkt hvas for a dinner knife🤣 and thats also 1.4116ss i believe ... and any time may aswell comment before youtube stops all knife content lol
@@martinbanks2419 yes your right. Knife and gun content is very edgy on here for some reason. It’s getting ridiculous the fear people have on inanimate objects. The biggest problem is that people cannot draw their own conclusions and whatever they are told they just believe it. I would be more afraid of a McDonald double cheeseburger or getting behind a wheel of a car before I was worried about someone with a knife 😁
The modern day world is going all backwards ... there happy to allow videos of people shooting up a class room of kids and other crimes ... but dont like people showing new knives and edc gear 🫣
I tried to get one yesterday, but they were sold out. I even had a $5 coupon from their daily wheel spin, so I could have gotten it for $16. Oh well.
I have early access passes to give away if your in the group on Facebook just make a post saying you need them and I will send you one next time I have a few to send now. It’s an awesome tool I think a lot of people will like it
Just got mine yesterday (Wed) delighted with it, do I need it, well that's a different matter. I too love Olight and have far too many. Keep up the good work. Peace from Scotland
@@dan6pthank you that’s awesome to see comments and views coming in from Scotland! I have quite a few olights myself. It’s great. Plus I love the roxon ks2 anyway to begin with so it was a no brainer to pick this one up. I think I’m going to get another for a spare when they come back in stock
@@whitetailsurvival2430 I appreciate the offer, but I'm not on Facebook. I'll try to pick one up during another Olight sale. Maybe they'll even offer the version with the bit kit at some point (like the Roxon KS2E).
@@garyk4017o I understand facebook isn’t for everyone. I can send early access passes only to an email as long as you are logged into Olight store but I would not post that in here 😂
It's the same steel victorinox use
I knew it sounded familiar for some reason!
Swiss army
Yes I knew that steel seemed familiar!
"I carried this a lot" - doesn't even know how to close the blade
When you have over a hundred of these things they start to blend together. I carry the ks2 a lot and it’s doesn’t matter how often I carry it I will still try to release it with the back lock. I carry a T4 everyday at work so I have a habit of reaching for the sliding back lock for every tool.
@@whitetailsurvival2430 how is the T4 compared to the KS2 in terms of quality and usefulness? I miss a good pry tool like the one on the T4.