My current setup: $60 Zoom G1on guitar processor chained into a Line 6 HX stomp utilizing audio interface and FX ONLY! It's a 2 DSP pedal board setup where Zoom G1 is dedicated to 3 blocks amp & cab, booster, and ZNR noise gate and the HX stomp is my audio interface and dedicated to FX ONLY --- 4 blocks with deluxe compression vintage digital delay, plate reverb and 12 band EQ. The HX stomp converts my guitar signal sampling rate to 48kHz. The shared DSP's provide outstanding power, low latency and tight response. However soon I will be building a super powered pedalboard with multiple modelers with a Nux Trident modeler, a Hotone Ampero II modeler with my (Line 6 HX Stomp as my audio interface and dedicated FX ONLY modeler) with Ampero and Nux Trident selection at a stomp of the foot vise versa selection one dedicated to one amp & cab/booster etc and the HX stomp for FX ONLY! all with 4 DSP shared rolls! The Line 6 HX Stomps single SHARC core gets pulled down with 8 blocks, I will share roll modelers now. These 3 units together will provide at least 75-100% more DSP power by far than a Helix floor unit alone with its dual SHARC+ cores and at least 25-50% of the power of an Fractal Axe FX III. Hotone Ampero II Stage 1- Tri-Core DSP $629 Nux Trident 2-dedicated DSP cores $450 (total $1079) My HX Stomp SHARC DSP = 4 DSP's in total! For the ultimate fury of pedal board DSP power! Compared to a spending $2500 for a Fractal Axe FX III and I would rather have a custom pedal board with these units sharing rolls at a cost of $1079 since I already own an HX Stomp that's currently on my board.
I think there's a good argument to be made that the f35 is actually relatively successful now that the problems with it have been worked out. The unit price isn't bad at all and there's a ton of international buyers lining up for it. Combat capability wise, it also looks like a great platform.
The best guitar associated product salesman on the planet . Igor Paspalj . Also, as demonstrated, the reasons the "big guys" try like hell not to acknowledge his existence . He can convincingly play any style there is . :) Great ad Igor . :)
@@Worlds_Worst_Guitarist Can you set your sampling rate to 48kHz or 96kHz for "live" play response on the HoTone? Also can you dial in pro tones with onboard cabs or is it a must to get an IR?
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
Which one do you prefer? Amp Academy or this pedalboard for the money?
Is there a way you can make some patches for us on another video, would be so helpful.
It's working for bass guitar or not?
My current setup: $60 Zoom G1on guitar processor chained into a Line 6 HX stomp utilizing audio interface and FX ONLY! It's a 2 DSP pedal board setup where Zoom G1 is dedicated to 3 blocks amp & cab, booster, and ZNR noise gate and the HX stomp is my audio interface and dedicated to FX ONLY --- 4 blocks with deluxe compression vintage digital delay, plate reverb and 12 band EQ. The HX stomp converts my guitar signal sampling rate to 48kHz. The shared DSP's provide outstanding power, low latency and tight response. However soon I will be building a super powered pedalboard with multiple modelers with a Nux Trident modeler, a Hotone Ampero II modeler with my (Line 6 HX Stomp as my audio interface and dedicated FX ONLY modeler) with Ampero and Nux Trident selection at a stomp of the foot vise versa selection one dedicated to one amp & cab/booster etc and the HX stomp for FX ONLY! all with 4 DSP shared rolls! The Line 6 HX Stomps single SHARC core gets pulled down with 8 blocks, I will share roll modelers now. These 3 units together will provide at least 75-100% more DSP power by far than a Helix floor unit alone with its dual SHARC+ cores and at least 25-50% of the power of an Fractal Axe FX III. Hotone Ampero II Stage 1- Tri-Core DSP $629 Nux Trident 2-dedicated DSP cores $450 (total $1079) My HX Stomp SHARC DSP = 4 DSP's in total! For the ultimate fury of pedal board DSP power! Compared to a spending $2500 for a Fractal Axe FX III and I would rather have a custom pedal board with these units sharing rolls at a cost of $1079 since I already own an HX Stomp that's currently on my board.
I think there's a good argument to be made that the f35 is actually relatively successful now that the problems with it have been worked out. The unit price isn't bad at all and there's a ton of international buyers lining up for it. Combat capability wise, it also looks like a great platform.
This is just next pedal,good but just next pedal😊but you,you are amazing player.
The best guitar associated product salesman on the planet . Igor Paspalj .
Also, as demonstrated, the reasons the "big guys" try like hell not to acknowledge his existence . He can convincingly play any style there is . :)
Great ad Igor . :)
Thank you my friend...enjoyed it🤜🤛
Sending love and hugs to the family 🥰💞🌹🙏
In the outro...i saw that Vega Trem!!... those are really good!!
This was honestly the worst Modeller i've ever tried!
Which one do you recommend?
@@teuteu13 HoTone Ampero II Stage
@@Worlds_Worst_Guitarist Can you set your sampling rate to 48kHz or 96kHz for "live" play response on the HoTone? Also can you dial in pro tones with onboard cabs or is it a must to get an IR?
@@IshredGuitar There is enough "live" play response as is! And no, you don't need external IRs. The Stock ones are just good.
Your playing is amazing 👏
My comment is the first 😊
You just killed Vai.....
awesome!👍👍👍👍
Great presentation!👏👏
🔥🔥🔥
Are you German?
Serbian :)
@@djuka7566 the Djokovic of guitar
GOTY. OBVIOUSLY.
Bosnian ...
Igor, you are one of the best guitarist I have ever seen, you make the guitar cry,talks....I can feel the emotion while you are playing..