I gave filtered supply no need extra filter, at output when we decreasing voltage will not decreasing same time because of residual charge in the capacitor
Buen video.Lo hice pero no se' que conecte mal ya que el Potenciometro no me regula.Le coloque' uno de 20 Ohmn que es el que tengo.Ayuda por favor.Muchas gracias.
Thank you sir for providing such useful videos on your chennal, keep doing the great work 👍.
Welcome
what is the minimum input voltage, and maximum input current for this circuit
Good information sir
هل تشغل الماطور ٧٧ عليه ؟
is this a variable DC to DC circuit...?
and can it work for switching with a DC voltage of 54 volts 3 amperes...?
क्या भाई सिर्फ पावर सप्लाय के ही वीडियो बनावोगे ?
Filter capacitor required at input and output. 50 k pot needs to be wire wound potentiometer. Need bigger heatsink.
I gave filtered supply no need extra filter, at output when we decreasing voltage will not decreasing same time because of residual charge in the capacitor
funciona por un rato y luego ya no al pedirle mas de 1.5amp
How can the same input current be the same output current?
Thanks alot sir
Welcome
Can you show me the speed control circuit for the DC motor of an electric bicycle?
Is it necessary to use MUR4100 here? or can any other 4 amp diode be used instead?
Any
Buen video.Lo hice pero no se' que conecte mal ya que el Potenciometro no me regula.Le coloque' uno de 20 Ohmn que es el que tengo.Ayuda por favor.Muchas gracias.
Selamat siang oom, tegangan masuknya masih volt ac, atau sudah dc..terima kasih dan sukses selalu.
good jod
TQ
84v 10amp auto cutoff for ebike how to ready ?
How if diode change with capacitor? It still work?
Diode is just to block back EMI generated by inductive load
BD243c use kar sakte hai
Yes
Supply dc v dena hai ya ac 220 dena hai
DC 60v
Posso colocar uma tensão negativa ?
No
El potenciometro es B20K.Ayuda no me regula.Algo que hice mal?.Muchas gracias.
use una resistencia de 100 ohmios entre el pin central del potenciómetro y la base del transistor,
I want 220V AC to DC power supply circuit
Lm317 kya use kar sakte hai.60 volt k liye
Nahi that is only 37v 1A
What is the use of a diode in this circuit?
To cancel the back emf generated by motor or coil from load side
If I use two tip41c transistors in parallel in this circuit is it possible to get 10 amp?
Yes, but use bigger heatsink
@@TARIQLABThanx...
Input me kaitna voltage diye hai.
60
Gostei , mas posso substituir o diodo por qual da minha cidade não tem o Mur4100
Sem problemas, você pode usar qualquer diodo
I want to increase the output load current, what should I do?
Use high amp transistor
What about diodes?
Diode is not important it is just for cancel emf generated by load, any number u can use
Ok thank you
What about potensio 50k, can we use it ?
hola tariq estoy intentando hacer un dispositivo pero no se como hacerlo, me podrías ayudar?, es un buz, seria éste
th-cam.com/video/gztpAYlpjn0/w-d-xo.htmlsi=QwNfi5Uo-IOVFKqZ
min. 11.36
th-cam.com/video/gztpAYlpjn0/w-d-xo.htmlsi=cAy9Hs6XgA-uY_25
What is the maximum current limit for this circuit ?
5A
@@TARIQLAB What if I wanted to increase the current ؟
With this transistor not possible, TIP120 8A
Can we use this regulator for 775 dc motor??
Yes, but bigger heatsink required
Saya membuat ini tetapi kenapa tegangan tidak stabil ?
Check potentiometer
Di gunakan untuk AC 220 bisa TDK
No
Diode 5408 work karega
Karta hai
@@TARIQLAB thank you
Will 100K pot work ?
Yes
Can we use 60v 3ah adapter?/
Yes
Thank you for your suggestion