Just wanna say thanks for all of your great videos I just picked up a t15 and your videos have been so helpful. They’re easy to understand but also detailed and you go over everything while giving tips too.
i recently bought a t15 and am having some issues with shots breaking inside the barrel. as I shoot fast, shots break and hit each other inside. could this be due to velocity ?
Most likely not…. Assuming your barrel is clean, you may be getting double feeds. That could be from the detents. How do u store the marker? With the barrel installed? If so, stop, store the marker with the barrel not installed. The bolt will flatten the detents. If you don’t have replacements, give your current detents a warm water bath
What would be a good tank. I bought the t15 pdw. I’ll be running a remote line and heard I’ll need a output pressure of 900. Which tank would be best for it, I’m looking for 48/4500. Something small
I myself like the first strike tanks and ninja tanks….. both tanks output pressure can easily be changed/adjusted by either using shims and/or spring swap.
@@PokeRemcards to run a newer t15, 825-850 should be plenty even with full auto. If youre running remoteline, add 25 psi to those values… and older pre gen 4 t15, will most likely need more. Expect 875 ish psi… first gen t15, expect 900 + psi
Hey what’s your mag release I’m trying to look for one I went through two and they kept releasing my mags when there was too much vibration it kinda sucks being left handed
It’s an Odin works xrs mag release…as for the mag release issue, did you try tightening the mag catch arm? Push and hold the mag release button, turn the mag catch arm clockwise one full turn
@@Prudyk1026 the stock mag release works fine I just like to click the button with my left finger and all the after market releases I’ve tried were too loose
Hi Paul, i just got a DMR last week. I played one night and found out couple problem but internet couldnt help, so i hope u can. 1. Chopped ball/Double feed. Dont know why but i checked velocity. Mid range is 195- 213 without chopping but when i crank a bit its chopping 2. Spur and leak air. My gun spur rapidly like Tippman rental ran out of air whenever its ran out of ammo. To fix is i cock back the bolt but its still doing it after i ran out of ammo or dry firing it. Any advice to help me.
Just curious what paintballs u were using. Sometimes using smaller tourney grade paint can lead to the double feeds and sometimes chops. The spur and leak, what air tank are u using? And did you oil the marker before it’s first use?
Just wanna say thanks for all of your great videos I just picked up a t15 and your videos have been so helpful. They’re easy to understand but also detailed and you go over everything while giving tips too.
Thanks for all the helpful end well done videos!
Thank you. Going target practice today.
Hello sir where did you pick up your buttstock? Beautiful marker.
Which Handguard is this?
Can you make vids to upgrade T15 to atleast 40 Joule? (For the purpose of less lethal self defense)
If i had parts to do the upgrades i would. But out of the box, getting those numbers isnt safely possible
Nice marker. Is that the stock pdw? If not how did you change it? I really want to change mine.
It uses the pdw guts, but the rest is an airsoft version stock… some modding is needed to get it to fit and seal well.
Nice hand-guard; where did you get it?
@@alien8383 breekarms.com
i recently bought a t15 and am having some issues with shots breaking inside the barrel. as I shoot fast, shots break and hit each other inside. could this be due to velocity ?
Most likely not…. Assuming your barrel is clean, you may be getting double feeds. That could be from the detents. How do u store the marker? With the barrel installed? If so, stop, store the marker with the barrel not installed. The bolt will flatten the detents. If you don’t have replacements, give your current detents a warm water bath
What would be a good tank. I bought the t15 pdw. I’ll be running a remote line and heard I’ll need a output pressure of 900. Which tank would be best for it, I’m looking for 48/4500. Something small
I myself like the first strike tanks and ninja tanks….. both tanks output pressure can easily be changed/adjusted by either using shims and/or spring swap.
@@Prudyk1026 what output pressure do you aim for on fs and ninja tanks?
@@PokeRemcards to run a newer t15, 825-850 should be plenty even with full auto. If youre running remoteline, add 25 psi to those values… and older pre gen 4 t15, will most likely need more. Expect 875 ish psi… first gen t15, expect 900 + psi
What hand guard is it?
Hey what’s your mag release I’m trying to look for one I went through two and they kept releasing my mags when there was too much vibration it kinda sucks being left handed
It’s an Odin works xrs mag release…as for the mag release issue, did you try tightening the mag catch arm? Push and hold the mag release button, turn the mag catch arm clockwise one full turn
@@Prudyk1026 the stock mag release works fine I just like to click the button with my left finger and all the after market releases I’ve tried were too loose
@@Prudyk1026 oh I thought it was an ambidextrous mag release
Hi Paul, i just got a DMR last week. I played one night and found out couple problem but internet couldnt help, so i hope u can.
1. Chopped ball/Double feed. Dont know why but i checked velocity. Mid range is 195- 213 without chopping but when i crank a bit its chopping
2. Spur and leak air. My gun spur rapidly like Tippman rental ran out of air whenever its ran out of ammo. To fix is i cock back the bolt but its still doing it after i ran out of ammo or dry firing it.
Any advice to help me.
Just curious what paintballs u were using. Sometimes using smaller tourney grade paint can lead to the double feeds and sometimes chops.
The spur and leak, what air tank are u using? And did you oil the marker before it’s first use?