Detailed Usages for KS-SF22R Vehicle security alarm
ฝัง
- เผยแพร่เมื่อ 23 พ.ค. 2018
- * KS-SF22R Newly design ,
* Vehicle Anti-Theft Alarm,Super Loud 113dB,
* Triaxial Accelerometer Sensor,7 Stages Sensitivity for adjustment ,
* SOS Emergency Help Function,6 Tones Loud Siren Sound Selectable ,
* Long-range Wireless,3*AAA Batteries for Power Supply .life last for 12 months .
*waterproof :IP55
*Range :40-80M
Thank you for the info,just got one for my Suzuki, intruder 1400...very helpful 😀
thanks for your choice
Hi I jus bought my e bike alarm may I know how to chg tone mine only 1 tone pls guide me how to chg to mode
replace the battery :1.using the provided screwdriver , remove screw from the bottom of alarm 2. insert triangular plate into opening on bottom and twist to separate each side , then you can take the cover for the alarm , you can replace the batteries freely
Hello, can you help me? i was looking for a way to adjust the volume level, i pressed and holded the "Bell" bottom, then i pressed "Ringtone" bottom. Now no matter what i do there's absolutely NO SOUND, there's a silence. what could be the reason?
you can unload the batteries of the alarm and the battery of the remote , then load them , and see or repair both as a set to check
Hello it can also be that you accidentally deprogrammed the alarm from the remote easy to do did it myself
replace the battery of the remote : the remote battery is 1*27A type , use the provided screwdriver to remove the 4 screws on the back of the remote , remove back plate and replace battery .
I bought the rechargeable alarm not using battery...does it has same instruction with this one ?
iguess it is not the same as our type , because our type is battery powered , different company has different ways , so it may has different instruction with this one
When the alarm is triggered will it stop after a few seconds or will it go on until I deactivate it with the remote?
hello Alexis , when it triggered , it will have 2S for warning , if you trigger it again , 30s for alarm , during this time you can deactivate it with the remote
If my alarm goes off will there be a way for me to know if the alarm has gone off. For example, yesterday I was in the shops and my alarm went off but I didn’t know until I finished and went outside. Is the controller meant to alert me?
it is one way , the remote has no reminder function , but better to remember ARM the alarm , before your leaving , make sure arm it .
I program my remote and it works but when I press arm or disarm nothing happens why?
I only get one beep when I connect the batteries.
one beep when connecting the batteries , it is ready , so if you trigger it , it will have another beep for 2s , if you trigger or move it again , then it will have 30s sound
You keep your hands in the frame!
For what cases do you need the function SOS?
Why didn't you say that?
when you ride the bike in the mountain , if falling down and nobody can notice , it can have the alarm ,and keep alarming every 1 minutes
How to increase volume label & sensitivity. Please help.
you can refer to the user manual , for sensitivity adjustment : press and hold the unlock key for about 6 seconds , and the LED will turn off and then back on , press the lock key once , and it will sound from DO up to your current sensitivity setting , repeatedly press the lock key until you hear the desired musical pitch . once desired sensitivity is confirmed , press the unlock key once to exit the setting .
volume setting :press and hold the unlock key for about 6 seconds , and the LED will turn off and then back on , press the bell key to cycle through the 3 volume levels , once the desired volume is confirmed , press the unlock key once to exit the setting
How can I reset the functions? I dont know what I did but the buttons aren't working.
you can unload the battery for the remote and the alarm , and repair both again by following the user manual or do it by the video
I lost the remote control. But I have another one. How can I do to use it? How can I program the new one? Thanks!
Program the first remote: unload the batteries ,then load them after
around 30s, press and hold doorbell key, then you will hear a beep, press ARM/DISARM key
button,2 beeps , it succeeds . if it does not work still , try this link :th-cam.com/video/-D-Vj1vPB4E/w-d-xo.html
It worked! Thank you very much!
@@nestorgiachero that's so good
I want tat tone after u chg battery how to setting d mode
DO YOU STILL HAVE THAT CCONCERNING ?IF YES , I WILL TRY TO HAVE THAT VIDEO
Hello. Please please for help.
I've got 2 alarms and 2 remote controls but both are "decoded?" , can't pair any remote with any alarm.
I had paired one remote with both alarms and then when i tried to pair the 2nd remote I must have done something wrong and i decoded the 1st remote ?
Now, I remove the batteries from the alarm, put them back, I long press the "BELL" key, I press the "ARM, DISAR" key and I get 3 beeps, NOT 2 that is the succesfull pairing
dear , you can just add one remote for one alarm for one time , if you need add more , repeat the same steps : remove the batteries then try to program as the same way for the first remote , i have uploaded the video for this functions th-cam.com/video/AzOJNb8ycJ8/w-d-xo.html th-cam.com/video/SV-DQtri7ho/w-d-xo.html pls check two videos to know how do program remote and alarm , also if you think it works , you can subscrible to my channel , i will try to keep loading more videos
@@winniefeng2807 dear ... I have explained what happened.
I have removed the batteries , placed them back, but pairing is not possible.
I long press the "bell" button, then "disarm" or "arm" BUT .... No 2 beeps for pairing.
I get 3 beeps.
However you can add 2 alarms at the same time, but this is something else.
@@winniefeng2807 you can add 2 alarms with a remote at once (at the same time).
This is something else. Leve it.
What I'm saying is that pairing is not possible at all.
I have removed the batteries, placed them back after an hour, (3 beeps when you connect the batteries).
Long press "bell" key, "arm" or "disarm" button, 3 beeps to the alarm. No pairing.
@@XeseMesaPolixroni you did something wrong ,watch my video you will figure out ,it has three beeps means the alarm are not defective ,your procedure might be something wrong
@@winniefeng2807 I'm telling step by step what I'm doing.
I didn't do something wrong.
Read carefully what I'm saying.
Every time I get 3 beeps.
It doesn't pairing.
I could send you a video so you can see.
Is it possible to add multiple sensors to one remote control?
1 remote can connect with unlimited alarms , 1 alarm can connect with up to 8 remotes
can you activate multiple alarms with one remote control?
hello Tony , yes , 1 remote can connect with unlimited remotes , 1 alarm can connect with 8 remotes
Hello! Is ot possible to get another remote for this alarm?
Yes, you can add a second remote. Available on Amazon
FFS can anyone please just explain how you pair two alarms to a single remote!
you may check this link , it may help ;th-cam.com/video/-D-Vj1vPB4E/w-d-xo.html
Hello. Why mine is non stop sound "tuk tuk tuk tuk" ?
maybe it means the battery low power , you can try to replace it by new batteries and check
How to change the volume level?
press and hold the unlock key for about 6 seconds , and the LED will turn off and then back on , press the bell key to cycle through the 3 volume levels , once the desired volume is confirmed , press the unlock key once to exit the setting
Any detailed written instructions ?
yes , do you have email , i can send to you , or may be you can send me email winnie@king-serry.com , then i can reply you
Hi how to adjust the sensitivity?
press and hold the DISARM key , it will sound "me..le..do" for 2 or 3 times , when LED indicater on ARM key goes off and display for a long pause then be bright , loosen your finger then press ARM key once , it will sound Do Le Mi Fa So La Si, then press ARM key button again for once , you will hear Do , press again Le etc , from highest to lowest , then sound in circulation . once any sensitivity you need , just stop and press DISARM button to exbit the setting , wish this can do some help
@@winniefeng2807 what about if you wanted to wake it up from dormant mode i accidentally put it to sleep mode
@@EverlastingEclipses do you mean when it is in sleep mode you want to active ?Way to active : press and hold ARM button on remoter,it will sound a short beep ,wait for a few seconds then shake the alarm till 3 short beeps , then activation is successful .If batteries replacement, there is no need to reactive.
Page 2 of the manual is at ...... imagizer.imageshack.com/img922/8518/alZZHy.jpg
Page 1 of the manual is at ......imagizer.imageshack.com/img923/5515/URbbOd.jpg
I cannot change the sensitivity
I tried doing what the instructions say and it doesn’t work
Jon Jon hold the unlock button until blue light comes on. Then you just press lock button and select the level u want.
@Dude Karl Do is the highest level sensitivity
@@JonJon-bm7wi press and hold the DISARM key , it will sound "me..le..do" for 2 or 3 times , when LED indicater on ARM key goes off and display for a long pause then be bright , loosen your finger then press ARM key once , it will sound Do Le Mi Fa So La Si, then press ARM key button again for once , you will hear Do , press again Le etc , from highest to lowest , then sound in circulation . once any sensitivity you need , just stop and press DISARM button to exbit the setting , wish this can do some help
SOS does not functioning .... :(
try to check whether you turn on the SOS function or whether you set it in right way successfully
Thanks for the tips on use, but my god this was painful to watch. Looks like most of it was made up as it went
this video is not good , will try to upload better one with more tips
👎
WHY DO PEOPLE WITH HEAVY ACCENTS TRY TO MAKE INSTRUCTIONAL VIDEOS IN ENGLISH ????? LOL
that is because so many people who can not read the instructions in english even their english is excellent
Do you sell just the remotes on their own?
I need a spare.
if you have the set before , yes you can buy the remote seperately ,where did you buy ?
@@winniefeng2807 Amazon