Obrigado, o anel tem um ajuste na alça de tal forma que ao girar o anel ele arrasta a finta, mas se eu tiver em mãos, forço a girar o anel sozinho. É por causa do ajuste
Cuales son las memdidas que cargaste en la web?como debo cargarlo, espero tu respuesta es el mejor video sobre como hacer un anel graduado que eh visto
Gracias, el diametro del volante es de 60 mm y el disco divisor en papel es de 120 mm y los incrementos son de ochenta divisiones, y cada division esta en 0,025 mm.
Great job I loved the way you engineered the way to scribe the graduation without using a dividing tool it is genus. thanks for sharing this on U Tube.
@@franciscomurciaprojects2327 Muchas gracias por la respuesta...saludos desde Chile.. Tengo el cabezal de 125 mm y la relacion de 70 mm en el dial ,no afectaria en la graduacion?
Hola amigo, el diámetro del cabezal no afecta en nada, lo único que se necesita saber es el paso del tornillo para poder hacer las divisiones exactas. Gracias saludos desde Colombia
Great video and work! I'm planning a simmilar project on my mini lathe as well and want to go with the printed scale method too. Really helpful to see, it works so well. Thanks for sharin! What paint are you using for blackening the numbers and lines on the scale? edit:subscribed:)
Hello friend, thanks for sharing, the paint I use is a black enamel, but you can use any black paint or even a black marker after applying, remove the excess and voila, you can ask me any questions, good luck with your project, greetings. ... FM
Hello. That's a splendid way for marking . Good that you shared Can anyone guide me to a linear scale making through this technique video . I want to make a linear scale for my boring machine
Hola, con mucho gusto le envío link donde puede diseñar el círculo directamente en la pagina web, solo incluya el número de divisiones que quiere darle al circulo así como lo muestro en el video. Automáticamente le generará el divisor del círculo. www.blocklayer.com/
Claro con gusto, yo uso esmalte negro pero se puede usar cualquier tipo de pintura negra incluso con un marcador negro lo puede hacer o un sharpie negro y luego limpia el exceso con thiner o alcohol y listo
Thanks for asking, but I don't know if you're referring to the dashes you need on the plate to mark the dial or the pitch on the screw. If you can clarify the question for me , with great pleasure . Thanks
Hola Amigos, hay una pagina donde estan esas graduaciones como muestra en el plato del torno, las diviciones, que se puede imprimir en un diametro de papel y poder utilizar el cabezal del torno como plato divisor. Algunos de ustedes se acuerda donde es ? Hace tiempo yo la vi. GRACIAS.
La página que recomiendo es Blocklayer. Com Sin embargo hay que tener en cuenta el número de divisiones que quiere realizar de acuerdo al diámetro y el te da los resultados a imprimir. Mil gracias
Thanks for asking, the screw is 2mm pitch. The screw when making a complete turn advances 2 mm therefore divided the circle into 80 equal parts which each division corresponds to 0.025 mm to the anel make 80 guides. thank you F.M.
🟢 Hola Francisco! Me gustaría mucho construir un anillo graduado, pero verte hacer eso no me permite entender el concepto de cómo funciona. Necesitaría un dibujo técnico :(
Thanks for asking, if you do it with the bloclayer.com page give the diameter and the number of increments either 32 or 35 and he gives you the exact divisions and you can print and remove the template to place it on the lathe this is a simple way to do so, if you require more information, do not hesitate to ask. Thanks F.M.
Hello sir, very good work, I am also impressed with the result. To try to do as you do, could you tell me about the depth of your graduations (large and small) and a link for the black product applied to the graduations. Can I hope for a positive response. Good continuation and friendly greetings. P. K
Hello friend, thank you for commenting, regarding the depth of the graduations they are 0.5 mm and the long graduation is 7 mm and the small one is 4 mm in length For the painting I use black enamel or it can be done with a black sharpie marker and then dried with alcohol or thinner and the black remains in the depth of the graduation. I hope this answer is helpful for you, if you have a question I am here to help you. Greetings. F. M.
@@franciscomurciaprojects2327 Hello sir. You pleasantly surprised me with your response so quickly and above all with your precise indications. So I can, without fear, start the job and hope to succeed by applying your information. Thank you again and have a good day, with my best friendly greetings. P. K.
Gracias amigo por preguntar, es un anillo o dial graduado que se usa para medir el avance del tornillo que lleva el elemento a desplazar en este caso el avance longitudinal del milling table el cual yo use un tornillo de paso 2 mm. quiere decir que cuando gira una vuelta avanza 2mm. Espero que sea de gran ayuda. Gracias F.M
Proper job. I love these channels that show how quality work can be done with modest equip!ent.
Thank you for commenting, any concerns, I am ready to resolve. thank you greetings from Colombia
Francisco gracias por compartir tu conocimento !! No sabes cuanto contagia tu video !!
Gracias amigo por comentar, me motiva a seguir creando nuevas ideas para compartir. Saludos
Excelente, simple, sencillo y bien ejecutado. Felicitaciones..!!!
Gracias amigo, espero haya sido de gran ayuda!
Dam, I was hoping this was for the emco 5 longitudinal wheel. Mine is 0.6 for each revolution and I hate it. Your wheel looks great.
Thank you my friend for commenting. greetings
I looked with pleasure. Neat, affordable, beautiful.
ok thank you interesting comment
Good work, I was trying to find out how to do the numbering.
Thanks for asking, as you can see in the video, 3mm numerators were used. of impact
Essa jogada da escala na castanha foi de gênio
THANK YOU
Gracias por compartir, estuve buscando por esta información, quiero hacer para mi tornito.
@@JFaria74 Gracias amigo, claro con esta informacion usted puede fabricar con las mismas caracteristicas. Saludos desde Colombia
This is very great video. Can you tell me the name of the tools you used for engraving number on the ring?
Thanks
Thanks for asking. Please use 3mm number markers.
Thank you very much❤❤❤❤❤
I'm from Vietnam, nice to know you're passionate about mechanics 👍👍 let's share experiences together
Thanks for commenting let's continue passionate about mechanics
Bạn chia độ tính đó dc ko
Very cool! Your punch design is the best I have seen yet.
Thank you
Top demais, como vc fez pro anel rodar junto com o manipulo, mas ficar parado qndo vc segirar com a mão??
Obrigado, o anel tem um ajuste na alça de tal forma que ao girar o anel ele arrasta a finta, mas se eu tiver em mãos, forço a girar o anel sozinho. É por causa do ajuste
@@franciscomurciaprojects2327 Entendi, que top, ficou mto bem feito, mais uma vez parabéns, aprendi mto!!
Great job mate, well done.
Thank you for sharing
Very, very good job.
i hope you are my teacher
With the lathe.
Friend thanks for sharing I hope it will be of great help
Obrigado por compartilhar seus conhecimentos, gostei desse programa de desenhar o disco divisor. Ja salvei aqui em meus favoritos!
Sim, obrigado por comentar, claro que este programa é uma ajuda muito boa para realizar o trabalho na oficina.
obrigado
Cuales son las memdidas que cargaste en la web?como debo cargarlo, espero tu respuesta es el mejor video sobre como hacer un anel graduado que eh visto
Gracias, el diametro del volante es de 60 mm y el disco divisor en papel es de 120 mm y los incrementos son de ochenta divisiones, y cada division esta en 0,025 mm.
Sehr schöne Arbeit!
Thank you
i love that motor cooling solution
Thank you, good idea
Great job I loved the way you engineered the way to scribe the graduation without using a dividing tool it is genus. thanks for sharing this on U Tube.
Thank you for your contribution, I find it interesting that my work can be replicated. Thank you from Colombia
Hola ...excelete video...quisiera saber que diametro tiene el dial....?
Gracias por preguntar. El dial tiene un diámetro de 70 mm.
Saludos
@@franciscomurciaprojects2327 Muchas gracias por la respuesta...saludos desde Chile.. Tengo el cabezal de 125 mm y la relacion de 70 mm en el dial ,no afectaria en la graduacion?
Hola amigo, el diámetro del cabezal no afecta en nada, lo único que se necesita saber es el paso del tornillo para poder hacer las divisiones exactas.
Gracias saludos desde Colombia
Só me fala uma coisa o diâmetro que vc coloca no site é o tamanho do papel ou do anel graduado?
Si gracias el diámetro en el papel es de 120 mm
Muito bom amigo
thanks friend for sharing
ok thank you
Great project dear man. Thanks 🙏
thank you for sharing
Great video and work! I'm planning a simmilar project on my mini lathe as well and want to go with the printed scale method too. Really helpful to see, it works so well. Thanks for sharin! What paint are you using for blackening the numbers and lines on the scale? edit:subscribed:)
Hello friend, thanks for sharing, the paint I use is a black enamel, but you can use any black paint or even a black marker after applying, remove the excess and voila, you can ask me any questions, good luck with your project, greetings. ... FM
Hello. That's a splendid way for marking . Good that you shared
Can anyone guide me to a linear scale making through this technique video . I want to make a linear scale for my boring machine
Of course, you can do it using the page that I use: www.blocklayer.com there are good helpers.
Can you please tell me where in that website for calculating the divisions/ graduation@@franciscomurciaprojects2327
Muy bien trabajo, también tengo un emco compact 8 y es una gran máquina, felicitaciones.
Muchas gracias amigo por compartir, saludos
Gracias, si los emco son muy buenas máquinas y muy precisas. Saludos
hola excelente podrias pasarme la plantillas imprimible de divisor de circulo
Hola, con mucho gusto le envío link donde puede diseñar el círculo directamente en la pagina web, solo incluya el número de divisiones que quiere darle al circulo así como lo muestro en el video. Automáticamente le generará el divisor del círculo. www.blocklayer.com/
@@franciscomurciaprojects2327 otra consulta con que tinta marcas los números gracias
Claro con gusto, yo uso esmalte negro pero se puede usar cualquier tipo de pintura negra incluso con un marcador negro lo puede hacer o un sharpie negro y luego limpia el exceso con thiner o alcohol y listo
Excellent work.
thank you my friend
Very good Congratulations
ok, thank you
Genius bro. True engineering, thanks for sharing 👍🙏
Thank you friend for commenting
How do I calculate the step of a screw on the winding of a dash equal to one in ten
Thanks for asking, but I don't know if you're referring to the dashes you need on the plate to mark the dial or the pitch on the screw. If you can clarify the question for me , with great pleasure . Thanks
I am talking about the seriousness of the nail. What is the law by which it is calculated?
@@klek2008Thanks, I do the calculation with a program on the page: www.blocklayer.com is easy and intuitive
muito legal, parabéns pelo trabalho. Qual altura dos numeros, é 2 ou 3 mm??? Obrigado
Thanks for asking, the numbers I use are 3mm high.
Thanks F.M.
Olá amigo trabalho fantástico muito preciso, parabéns!!!
Lhe desejo saúde e sucesso!!!
Abraço
thank you
What millimeters did you use Number Metal Stamp ?
Thank you for sharing, i use 3 mm.
Nice work. Subscribed. I am in the process of a diy mill also. Thanks for sharing!
Thank you very much for your comments, any questions I am willing to help you
trabalho maravilhoso vc esta de parabens
thanks friend
Nice, I like that, pleasure to watch, Thanks
Ok. Thank you nice comment
Excellent!!!!! What paint used?
Hello friend you can use any black paint there is no problem
Molto bella ed efficace pure l'attrezzatura per guidare i punzoni numerati...
ok thank you for sharing
Cool work 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
thank you
congratulations very creative
Thanks friend for commenting
Amazing. Very nice.
thank you
Good work, congratulations.
Thanks for sharing
Good work!
ok thank you
Hello, your video is very well explained. A question, what ink did you use for the numbers??? greetings from Argentina
Gracias amigo por preguntar, se puede usar pintura negra cualquiera o con un maracador sharpie negro. Saludos desde Colombia
Hola Amigos, hay una pagina donde estan esas graduaciones como muestra en el plato del torno, las diviciones, que se puede imprimir en un diametro de papel y poder utilizar el cabezal del torno como plato divisor. Algunos de ustedes se acuerda donde es ? Hace tiempo yo la vi. GRACIAS.
La página que recomiendo es Blocklayer. Com
Sin embargo hay que tener en cuenta el número de divisiones que quiere realizar de acuerdo al diámetro y el te da los resultados a imprimir. Mil gracias
Ya lo vi amigos bloclayer, esta muy buena. gracias !!!
@@franciscomurciaprojects2327 GRACIAS Francisco, abrazo.
Wonderful
Thank you for sharing
Compliementi, davvero delle belle idee !! Grazie mi hai ispirato !!! Saluti dall'Italia !!! :)
Thank you
Trabalho excepcional.
thank you my friend
How do I calculate the step of the wick with the cow that I have snagged
Thanks for asking, the screw is 2mm pitch. The screw when making a complete turn advances 2 mm therefore divided the circle into 80 equal parts which each division corresponds to 0.025 mm to the anel make 80 guides. thank you F.M.
🟢 Hola Francisco!
Me gustaría mucho construir un anillo graduado, pero verte hacer eso no me permite entender el concepto de cómo funciona. Necesitaría un dibujo técnico :(
ok entendido en proximo video te lo explico gracias
Hello can u expllane how calculate gear of 32 and 35 touth for lathe thank u
Thanks for asking, if you do it with the bloclayer.com page give the diameter and the number of increments either 32 or 35 and he gives you the exact divisions and you can print and remove the template to place it on the lathe this is a simple way to do so, if you require more information, do not hesitate to ask. Thanks F.M.
@@franciscomurciaprojects2327 ok thank you so much and have a good time i like what u do
Congratulations! Very thanks!
Thanks for comment. Greetings F.M.
Nice work
Thank you
Gracias amigo trabalho fantástico !
thank you
maravilha. muito legal.
thank you
Excelente!!! Gracias!!!
Gracias por su comentario
Ótimo trabalho ,parabéns.
thank you
Hello sir, very good work, I am also impressed with the result. To try to do as you do, could you tell me about the depth of your graduations (large and small) and a link for the black product applied to the graduations. Can I hope for a positive response. Good continuation and friendly greetings. P. K
Hello friend, thank you for commenting, regarding the depth of the graduations they are 0.5 mm and the long graduation is 7 mm and the small one is 4 mm in length
For the painting I use black enamel or it can be done with a black sharpie marker and then dried with alcohol or thinner and the black remains in the depth of the graduation. I hope this answer is helpful for you, if you have a question I am here to help you. Greetings. F. M.
@@franciscomurciaprojects2327 Hello sir. You pleasantly surprised me with your response so quickly and above all with your precise indications. So I can, without fear, start the job and hope to succeed by applying your information. Thank you again and have a good day, with my best friendly greetings. P. K.
@@paulk3573 Muchas gracias y espero que todo le salga bien.
Saludos
Thank you very much and I hope everything goes well for you.
Greetings
Great job dear man 👍 Where did you buy the number?
Thank you for comment
Muito bom.
Thank you for comment.
What can be done if it's taper shaped..??
Thanks friend, if it has a conical shape, it is done by turning the lathe carriage to the angle and the same procedure is followed.
Васхитительно!
thank you
Good
Ok thank you
good one
Thanks you
Muito bom
ok thank you
Gracias!
gracias amigo por compartir
Thanks support All persons
Thank you sir
مبدع
ok, thank you
Yes
Thank you
Que es eso?
Gracias amigo por preguntar, es un anillo o dial graduado que se usa para medir el avance del tornillo que lleva el elemento a desplazar en este caso el avance longitudinal del milling table el cual yo use un tornillo de paso 2 mm. quiere decir que cuando gira una vuelta avanza 2mm.
Espero que sea de gran ayuda.
Gracias F.M
cool
Ok thank you
Abdulaziz khan
ok interesting answer
Pero que hdp no podes tener tanta calidad
Sos un capo maestro
Te felicito 👏
Gracias amigo por compartir saludos desde Colombia
👏👏👏👏
Gracias
👍👍👍🤗
Thank you
🙂👍🏻
Thank you