I noticed on the portion where you cut the square out of the aluminum card, you had some issues printing pictures on it. I'm having those same issues and can't seem to figure it out. Any tips?
It depends on your metrial; we use a speed of 2000, an interval of 0.05, and 40% power for hammers and pliers. and the same speed and interval with 50-60% power for our D80 rotray. If you are not sure about your material, I suggest starting with a low power, like 30%, for testing.
Why always 100% power.. Why Not 90% power go a little slower adjust frequency. Honestly used right this laser should/would never hit 100% power. If it has too, You need more wattage.
Thanks for your interest to ComMarker lasers,Would you please email your more detail about the sample parts you intend to know ?our official email： hello@commarker.com Official Website:commarker.com/
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
So fast! Perfect for fairs and events where you're live and need to move fast... Awesome.
Great video - thanks for taking the time to
$2200 USD for what you show doesn't look too bad. I would have expected $3500+
This 20w MOPA laser with the rotary shown sells for $3,400. With the other accessories shown you would be paying over $3,500.
Will the 30 watt do detailed engraving on a metal disk the size of a size of a US nickel? Thanks.
Thank you for this video! Where I can find those test files like on 4:36?
I noticed on the portion where you cut the square out of the aluminum card, you had some issues printing pictures on it. I'm having those same issues and can't seem to figure it out. Any tips?
20w can deep engrave?
I am brand new but I am 90% you don't want to run your laser on 100% power. I believe i heard it on another channel. Wish I knew more or why
Si juro att Julio Rene Gutierrez Mendoza
setting for cleaning steal?
It depends on your metrial; we use a speed of 2000, an interval of 0.05, and 40% power for hammers and pliers. and the same speed and interval with 50-60% power for our D80 rotray. If you are not sure about your material, I suggest starting with a low power, like 30%, for testing.
With ComMarker B4 20W
@@commarkerofficial i have 30w
Then you may start with the half power for a test.@@playvision5667
Why always 100% power.. Why Not 90% power go a little slower adjust frequency. Honestly used right this laser should/would never hit 100% power. If it has too, You need more wattage.
Phone no open
Compani phon namber adders
Thanks for your interest to ComMarker lasers,Would you please email your more detail about the sample parts you intend to know ?our official email： hello@commarker.com Official Website:commarker.com/
Compani Fone namber open
Compani phon namber adders
It can achieve