The rollers get old and hard and slide off the bearings or just crumble. There are 2 types of rollers flat and tapered the tapered ones go on the edges and the flat ones in the middle. If you roll them you will see which way the taper is and that goes to the inside. You can swap rollers from your roland cutter or printer. If you lose a clip you can use the spare washers if you cut it with a hacksaw and file the gap a bit you can put it on the groove and close it with pliers to get you out of trouble.
so, your hands are way nicer then the other guys, plus you have great explanations in your audio......but sorry....his shirt was way nicer.....hahaha. thanks for the great video
Love the magnetic sheet tip. Great vid
Thank you so much for this video, I was completely lost before watching this!
No problem!
Thanks for the tips, easy to follow, I appreciate the "no hand" views! :)
THANK YOU!!! What kind of grease is this?
Thank you very much :) This was exactly what I was looking for!
Thanks my friend. This was a life save for me.
The rollers get old and hard and slide off the bearings or just crumble. There are 2 types of rollers flat and tapered the tapered ones go on the edges and the flat ones in the middle. If you roll them you will see which way the taper is and that goes to the inside. You can swap rollers from your roland cutter or printer. If you lose a clip you can use the spare washers if you cut it with a hacksaw and file the gap a bit you can put it on the groove and close it with pliers to get you out of trouble.
Sure, complain in the video about other videos blocking your view with their hand. AND THEN you do the EXACT same thing. Good job :)
OMG! Dzisiaj tego potrzebowałem, a opublikowane wczoraj! Specjalnie dla mnie? Dziękuję! :D
Thank you!
Thank u For sharing with us this Video its Realy useful
so, your hands are way nicer then the other guys, plus you have great explanations in your audio......but sorry....his shirt was way nicer.....hahaha. thanks for the great video
thanks so much for the video :)
thanks for the video.....OMG....this C clip is damn hard to put back!!! I wonder who design it....
Can I ask why you replaced the roller? Did it correct a problem you were having with the machine? Great video
My media was pulling to one side.