Yes! The 80/20 T-Slot aluminum extrusions and fittings are the DIY guy’s best friend! Marco and Brad were early examples. This takes it to the next level. Thanks for sharing!
I needed this for a three-week road trip seven years ago. This is also great for those trips where you pull into camp late in the day. Definitely a mom-friendly build.
The coffe table lift ups ...genius...space saving ...it is a tetras players dream ...awesome lights to ...draws and under ...amazing ...dont think i ve ever seen anything so well thought out and compact ...i want it .
As much as I love my little butane burner when I go backpacking in the wilderness, this pull out kitchen is the ultimate for car camping. I love the little sink and how neatly it packs everything. Well done!
Caroline Carriere There’s nothing wrong with compact and light, and there’s nothing wrong with bringing it all along either :) The response at instagram.com/PullKitchen has been humbling!
Brdaley E no it was not cheap, but I also couldn’t find what I wanted, which was kitchen storage, pantry storage, running water, burners, cutting board, lights, and easily removable in a couple minutes. My co-founder and I started making Pull Kitchen’s now and added self-contained water and power to the list of features. We are on instagram @pullkitchen and PullKitchen.com
This is amazing. I know it's overkill, and purists will say you just need a sleeping bag and a kettle, but I agree - once you're building something yourself, why stop until you have exactly what you want? This is probably the best-equipped and nicest-looking kitchen drawer I have ever seen. Great job.
Wow! I thought Dave's last build was spectacular, but this sets a new bar. Great job! I need to start working on my skills so I can build something a fraction as nice.
Tom Pula it was a looooooong project! Hahaha but I’ve been looking at possibly starting a company to produce plans and kits for those interested. www.PullKitchen.com
i actually built similar drawers and put telescopic poles at the end for some extra stability. my drawers aren't as tall though. It houses a sink, space for my coleman stove and a ice chest fridge on the right side. Left side drawer holds all my equipment, tools, dishes, etc. The right side drawer is fully contained so there's no hoses sticking out of the bottom. i have side drawer fronts that have magnets on them so they just pop off and on easy and i keep my freshwater, gray water and propane tank under each of the 3 side compartments. i used wood for mine and it's a bit crude compared to this build but it does the job :)
HDPE is available in 3x5 sheets at Menards. It can be cut to size with a regular jigsaw, drilled with regular bits, and routed with regular router bits. It comes in several colors and many different thicknesses.
I know it's counter-intuitive, but this would likely damage the sliders by torquing them upward. Imagine if someone heavy got in the rooftop tent while the pole was out? The car's suspension would compress, but the pole wouldn't, and the sliders would be bearing the load. Better to just deal with a little wiggle and stay safe.
I was thinking the same thing. I'd be a little paranoid about the bounce, and guaranteed I'd be leaning on the end of that thing having a beer with a buddy. But it's a great concept.
Paul Jordan glad to hear that! Yeah check out the DIY forum and under Tacoma Drawer 2.0 on overlandbound com. I also put up a feeler website PullKitchen com as well. Thanks!
I’ve seen both the drawers in person and in action and they are amazing! Dave is set up and enjoying an ice cream bar before I can even get my tent out of the tote I stuck it in! The his whole setup with RTT goes up ridiculously fast and is awesome to see in person. I’d love to get this kitchen together one day!
This is amazing. I am taking out the seats of a mini van and installing 2 sets underneath a full length bed. I was going to use wood on both of them, however, I am loving this instead. Thanks for the ideas
This is incredible. With all my heart I wish I was that gifted to do something like this... great job guys. It’s funny to, just this morning I watched the video you did a year ago with Dave and his wood drawer.
I am posting this a couple times, but if anyone might be interested I’m looking into producing some kitchen drawers, I put up a simple website to see if there’s interest. www.PullKitchen.com
I am posting this a couple times, but if anyone might be interested I’m looking into producing some kitchen drawers, I put up a simple website to see if there’s interest. www.MotiveDesignsInc.com
Cool, that is very neat. I am building a ute camper at the moment & I had something similar in mind. You have just expanded those ideas. Thanks for showing.
Just wanted to comment to point out there are "drop-in" 8020 t-nuts that you can place anywhere inside the channel of the profile. They're just as sturdy as the normal slide in t-nuts. I used these aluminum profiles to build my thesis project, and the drop in t-nuts were a life saver! Great project, the results scream quality.
Robert Lee well we started PullKitchen dot com and refined every aspect of this unit, and still no leg. The mount on this blue drawer was causing the flex and now our new mount and support a 150lb person hanging on the end. NOT that I recommend it
Wank wank wank, awe geez, when he pulled that out and opened it up! Beautiful mate. Look, if you think its over built, so be it. Sometimes things built dont have to be financially viable when it exercises you talents and works the brain. Very well done.
David, down here in Aus I use a Jayco wind up camper. Ive outfitted it to make things quicker to setup and put away. It encourages us to go away more. One of the mods I did was make a timber pull out kitchen utilising the side hatch. Its only a basic unit and it was built around a 50 yo stove. The stove isnt very practical for the application but I just had to use it. I would have had more drawer depth if I used a more compact stove.
Great googa mooga, mate! Talk about beautiful. Form AND function. Dave gives us new to dreaming of DIY projects in our rigs amazing inspiration and hope.
If his fridge slide had a pivot to be able to turn that fridge 90 degrees itd save it getting in the way of the kitchen, only knit pick i could see otherwise that's an incredible diy setup
This is simply amazing! If Dave is willing to create something like this for the new Gladiator... Trail Recon and all other owners would buy this like a hotcake!
I got clearance from Michael as I am posting this a couple times, but if anyone might be interested I’m looking into producing some kitchen drawers, I put up a simple website to gauge if there’s interest. www.MotiveDesignsInc.com. Let me know!
I got clearance from Michael as I am posting this a couple times, but if anyone might be interested I’m looking into producing some kitchen drawers, I put up a simple website to gauge if there’s interest. www.MotiveDesignsInc.com. Let me know!
David Douglass I love it and think it would be an amazing addition to my truck. Since my topper is so low, I think the top would need to be a max of 14-15” tall to make my bed still work. I also want to carry a bigger water tank (18-20 gal) I have a sketch up of what I’m hoping to do.
Love it .... I have also fitted out my 80 with my own design I just didn’t like what was commercially available and anyway I just love to create and build stuff its the individuality that I love.....
Darren Mitchell I hear you. For me I like the idea of a complete system that isn’t permanently installed. I couldn’t find a unit so I built my own, and based on the crazy amount of interest I’ve partnered with an Apple engineer and we’ll be launching soon and at Overland Expo West. www PullKitchen com
It moves a little side to side in this DIY as only one slide was locking. In our production units both slides are locking. And the slides can hold a person
I've never seen any commercially produced pull out kitchen that looks better than this, whyyyy? This is great.
The minute he extended the first drawer to reveal the hidden sink and stove, I smashed that Like button quicker than a Guitar Hero pro. LOL
BigBoss now that made me laugh! Glad you like my drawer. I made a little website PullKitchen if interested
same!
COOL
Set~up is amazing.......I think I would still use adjustable support legs.....
Yes! The 80/20 T-Slot aluminum extrusions and fittings are the DIY guy’s best friend! Marco and Brad were early examples. This takes it to the next level. Thanks for sharing!
Team OROZŪK where can I get this
I needed this for a three-week road trip seven years ago. This is also great for those trips where you pull into camp late in the day. Definitely a mom-friendly build.
Hey Brenda! Yes it is great for long trips and has already been mother approved! Haha. Glad you like it!
Brilliant. There's at least three or four ideas here that are completely new to me.
WillN2Go1 you should see our new red kitchen
Very nice set up
The coffe table lift ups ...genius...space saving ...it is a tetras players dream ...awesome lights to ...draws and under ...amazing ...dont think i ve ever seen anything so well thought out and compact ...i want it .
Richard Ingle glad you liked it! Pretty proud of it. I made a website PullKitchen :)
@@daviddouglass208 thank you for letting me know about the website , i will definitely check it out 👍.
I’ve been considering a teardrop trailer build, but the kitchen solutions I’ve seen fell short. This one hits the bulls eye. Thank you!!
Glad you liked it
Dave is a GENIUS! There's few overland DIY projects that I enjoy/respect.....but this design rocks.
Glad you like it! It’s changed camping for us!
Someone who can dream up something like this, then make it happen..... respect, nothing but respect. Awesome 👍👍👍👍
Darren Wilcox Thanks! Definitely born out of frustration, and HATING bins. Now we make them for sale
Best kitchen pull out I’ve ever seen
As much as I love my little butane burner when I go backpacking in the wilderness, this pull out kitchen is the ultimate for car camping. I love the little sink and how neatly it packs everything. Well done!
Caroline Carriere There’s nothing wrong with compact and light, and there’s nothing wrong with bringing it all along either :)
The response at instagram.com/PullKitchen has been humbling!
normally I am the kind of guy telling people that there is no such thing as "perfect" setup...well, looks like I was wrong. great job!
just down the road haha that made me smile thanks! I’m hoping other people might think so as well
I am amazed at how he set up his display. Great
That is just next level. wow.
Thanks! It’s now the coffee cart in our PullKitchen shop in Milpitas California :-)
I NEED this!!! That is the most practical setup I have seen.
We are producing them now, Pull Kitchen
One of the best DIY camp kitchens, i have ever seen. Probably one of the most expensive also, I would imagine.
Brdaley E no it was not cheap, but I also couldn’t find what I wanted, which was kitchen storage, pantry storage, running water, burners, cutting board, lights, and easily removable in a couple minutes. My co-founder and I started making Pull Kitchen’s now and added self-contained water and power to the list of features. We are on instagram @pullkitchen and PullKitchen.com
Yep. You can get one for the low low price of $4,000.
Shout out to Dave
That is some crafty design and major inspiration
Great design
One of the best DIY drawers/kitchen on a rig I've seen. I'd pay for one if it'll fit my 80 Series Landcruiser.
We had a customer put one in his LC, it’s on our Instagram. @pullkitchen
This is so much better then anything I could find to purchase. Nice job.
Jeffrey Clement thanks! I have a website now www PullKitchen com if interested
This is amazing. I know it's overkill, and purists will say you just need a sleeping bag and a kettle, but I agree - once you're building something yourself, why stop until you have exactly what you want? This is probably the best-equipped and nicest-looking kitchen drawer I have ever seen. Great job.
Thank you! It’s grown since this video, our company took PullKitchen to SEMA 2021 in Vegas and displayed it at the Ford booth. It was surreal
I wish this fabulous invention could be commercially available.
USA4US Well it is! I started Pull Kitchen with another Overland Bound member and you can follow along on Instagram @pullkitchen
Wow! I thought Dave's last build was spectacular, but this sets a new bar. Great job! I need to start working on my skills so I can build something a fraction as nice.
Matt Ringel I’m more of a “mistakineer” than an engineer, trial and error and you can really do it. Kind words, thanks!
really awesome build
red angry duck thanks! Still working on making it better with my latest edition :)
Quite understated and subtle! LOL. Must have been a blast putting it all together!
Tom Pula it was a looooooong project! Hahaha but I’ve been looking at possibly starting a company to produce plans and kits for those interested. www.PullKitchen.com
i actually built similar drawers and put telescopic poles at the end for some extra stability. my drawers aren't as tall though. It houses a sink, space for my coleman stove and a ice chest fridge on the right side. Left side drawer holds all my equipment, tools, dishes, etc. The right side drawer is fully contained so there's no hoses sticking out of the bottom. i have side drawer fronts that have magnets on them so they just pop off and on easy and i keep my freshwater, gray water and propane tank under each of the 3 side compartments.
i used wood for mine and it's a bit crude compared to this build but it does the job :)
That is so cool.Good job.
Thank you:)
HDPE is available in 3x5 sheets at Menards. It can be cut to size with a regular jigsaw, drilled with regular bits, and routed with regular router bits. It comes in several colors and many different thicknesses.
great job brother. been looking at outdoor kitchen ideas and this is legit.
Thanks! We started a business now and have shipped them all over the US. On Instagram @pullkitchen
That is a proper kitchen set up, very smart 👌🏻
Unbelievably AWESOME!!!!!! WOW!!!! I would love to build this. The Aluminum rail system is very smart way to build it. Gives you lots of choices.
This is EXACTLY what I was looking for, thanks TH-cam man and friend 💞
i can't say enough how useful this item is
Agreed, just got back from Death Valley and whipping out the kitchen in seconds is huge after 4 nights and hundreds of miles.
excellent design. best i’ve seen. best of luck selling tons of units!
It’s been nuts so far! Thanks
That's quite the setup, I'm just glad that I can even get all of my camping gear in my Corolla at all!
Jeroen van Achterberg Outdoor now that’s a tight space! I don’t have a solution for that yet 😉
I would include a drop leg adjustable aluminium pole at the end to stop it bouncing but it’s perfect otherwise.
how does one design this and not automatically include a drop leg
like make LTD .)
There is no need. That is y he is using 500 pounds slides. Those 500 pound slides are not cheap
I know it's counter-intuitive, but this would likely damage the sliders by torquing them upward. Imagine if someone heavy got in the rooftop tent while the pole was out? The car's suspension would compress, but the pole wouldn't, and the sliders would be bearing the load. Better to just deal with a little wiggle and stay safe.
I was thinking the same thing. I'd be a little paranoid about the bounce, and guaranteed I'd be leaning on the end of that thing having a beer with a buddy. But it's a great concept.
Worth every cent looks properly Deeelux. Good job buddy.
robs_outdoors want one? :)
@@daviddouglass208 Like you prefer to build stuff myself....but if I was in your neck of the woods.. tempting!!!
Saw the first installment of this set up ... great finish !
Great design! I am a new member of the Overland Bound team and plan to look for your plans on the forum. Thank you for sharing your work with us!
Paul Jordan glad to hear that! Yeah check out the DIY forum and under Tacoma Drawer 2.0 on overlandbound com. I also put up a feeler website PullKitchen com as well. Thanks!
He could make some profit on this. Hands down the most beautiful kitchen setup for overlanding and I've seen a lot of ideas out there.
I’ve seen both the drawers in person and in action and they are amazing! Dave is set up and enjoying an ice cream bar before I can even get my tent out of the tote I stuck it in! The his whole setup with RTT goes up ridiculously fast and is awesome to see in person. I’d love to get this kitchen together one day!
ToeKnee thanks bud! Glad we have become friends through Overland Bound!
This is amazing. I am taking out the seats of a mini van and installing 2 sets underneath a full length bed. I was going to use wood on both of them, however, I am loving this instead. Thanks for the ideas
By far this nicest kitcken rig I have ever seen ! VERY nice! A job well done Dave ! You should totally patent that and sell it. Bet it will sell!
1833 AN kind words! Thanks
This is incredible. With all my heart I wish I was that gifted to do something like this... great job guys. It’s funny to, just this morning I watched the video you did a year ago with Dave and his wood drawer.
I am posting this a couple times, but if anyone might be interested I’m looking into producing some kitchen drawers, I put up a simple website to see if there’s interest. www.PullKitchen.com
Awesome setup!
Rivals goose gear in fit and finish. Well done.
Delbert Humperdink thanks!
Awesome.... Awesome.... Awesome...
I am speechless 👍👍👍
Really well thought out
My goal was to have everything work without having to close a hatch or door to get to another drawer or anything. Simple and clean
Wow,thank you for sharing this is a great idea for my sailboat.
Rafael Maldonado jr We’ve done trucks, vans, and trailers. A boat would be a first!
You need to patent this and put this into production.
Joseph Melcher well we are! www pullkitchen com, it’s even better now :)
wow, that is so good. nice work mate!
I have used tap plastics alot and always deliver a great product
Absolutely amazing!
The only think I would add is some kind of folding support at the end for even better stability...
That would be amazing.
Bravo, bravo, bravo! Thanks for sharing your creativity.
kwesty1 thanks! We are building them now, check out @pullkitchen on Instagram
Wow... We just slap everything in plastic crates in the back of pickup truck and sleep inside the fiberglass shell. Very impressive !
Phil C. There’s no wrong way to do what works
Very nice. I'm considering 80/20 myself for my final build. I'm also looking into brazing aluminum. Man what an awesome build. Beautiful quality
Sir William Goes hey thanks for the kind words, it was a labor of love :)
I am posting this a couple times, but if anyone might be interested I’m looking into producing some kitchen drawers, I put up a simple website to see if there’s interest. www.MotiveDesignsInc.com
Very nice I’d totally buy one. I suck at DYI stuff
Robert Meyer wellllll you can! Sign up at PullKitchen com
Cool, that is very neat. I am building a ute camper at the moment & I had something similar in mind. You have just expanded those ideas. Thanks for showing.
Just wanted to comment to point out there are "drop-in" 8020 t-nuts that you can place anywhere inside the channel of the profile. They're just as sturdy as the normal slide in t-nuts. I used these aluminum profiles to build my thesis project, and the drop in t-nuts were a life saver! Great project, the results scream quality.
Alberto Castillo Gutierrez they are really helpful for sure! I used them where the sliders connected to the drawer
Call him "Dr Dave" the storage Dr. It`s what I`ll be building mine out of........just what the Dr. ordered! Thanks for a great vid.
Glad you are inspired!
Very nice craftsmanship!
Brilliant design and engineering. Thank you both for sharing with us.
Wow... I want on to my truck too
Looks really awesome!
I do think that a foldable support leg to the drawer would give more confidence and stability.
Yaniv Eliash everyone wants a leg! I promise it really is steady and it might be the camera making it look like it’s 15 feet long :)
@@daviddouglass208 My concern would be some large person leaning on it. That could be a problem.
Robert Lee I have a problem with a large person leaning on me!
@@daviddouglass208 Not you! Bwahahahahahahaha! Your drawer!
Robert Lee well we started PullKitchen dot com and refined every aspect of this unit, and still no leg. The mount on this blue drawer was causing the flex and now our new mount and support a 150lb person hanging on the end. NOT that I recommend it
Now that’s a kitchen.
Thank you! :)
Awesome drawer project.
Would be great to see you do a full rig camp set up video. Looks like Dave has a great setup.
Holy crap! One hell of a job on that setup, very nicely done.
You should market that, I would buy one for sure.
D Brickner we do now! www PullKitchen com, you can also see a lot of info on Instagram @PullKitchen
I was proud of my drawers I built but now im jealous! Extruded aluminium looks awesome!!
Lost Sasquatch you should be proud of what you’ve got in your drawers.....
@@daviddouglass208 still proud and I learned a lot but now I have some good ideas for version 2!
David Douglass IDK most drawers don’t come with extruded aluminum. Most other extrusions are quite fluid though. ;)
HablaCarnage63 I see that, see what you did there...
Wank wank wank, awe geez, when he pulled that out and opened it up! Beautiful mate. Look, if you think its over built, so be it. Sometimes things built dont have to be financially viable when it exercises you talents and works the brain. Very well done.
Thank you! It’s a game changer to be cooking by the time others are still getting their tents up 😇
David, down here in Aus I use a Jayco wind up camper. Ive outfitted it to make things quicker to setup and put away. It encourages us to go away more. One of the mods I did was make a timber pull out kitchen utilising the side hatch. Its only a basic unit and it was built around a 50 yo stove. The stove isnt very practical for the application but I just had to use it. I would have had more drawer depth if I used a more compact stove.
@@polyanthemos I agree the easier it is to use our gear the more we use it! Sounds like you’ve got a great setup for yourself 👍🏼
That thing is a beauty.
What GREAT ideas guys. Now I have to get busy planning! Thanks.
Great googa mooga, mate! Talk about beautiful. Form AND function. Dave gives us new to dreaming of DIY projects in our rigs amazing inspiration and hope.
Rich G haha that made me laugh! Thanks
@@daviddouglass208 For sure! Heading over to the thread to read more about the project. Have fun adventurin'!
Well he took it apart about 10/15 times so. I'm not there yet, but it helps to know its all a big learning curve. Enjoyed the vid, thx 👍
Where is the dishwasher? Haha. So beautiful!
Hmmmm I bet I could fit one
That is unbelievably amazing!!!!
BCB thanks! We are manufacturing them now :) www PullKitchen com
Very nice job👍
If his fridge slide had a pivot to be able to turn that fridge 90 degrees itd save it getting in the way of the kitchen, only knit pick i could see otherwise that's an incredible diy setup
Nice work Dave
This is simply amazing! If Dave is willing to create something like this for the new Gladiator... Trail Recon and all other owners would buy this like a hotcake!
Elliott Choi interesting idea....thanks for the feedback
I got clearance from Michael as I am posting this a couple times, but if anyone might be interested I’m looking into producing some kitchen drawers, I put up a simple website to gauge if there’s interest. www.MotiveDesignsInc.com. Let me know!
This looks like something out of an overland version of the Container Store. 🙌🏼 Nice job!
Wow, That is awesome. Do you have the plans and how much?
Cracking job, seems like a genuine fella!
N Noddy a cracking genuine fella, but I’m biased :)
Thanks for sharing this!
Gaia Carney Glad you liked it, we started producing these now! PullKitchen.com or instagram @pullkitchen
Well done mate. This is very practical. I do like it.
Hendrik Karsten thanks and cheers!
Absolutely badass!!! Thanks for sharing
Tommy Morgan thanks Tommy for the encouragement. We are producing them now! Instagram @pullkitchen
Best thing I've seen on the Internet in a long time. Well done Sir!
Really cool camp kitchen 👍🏻👏👏🇺🇸
Toby Jacob thanks! We are making them now :) PullKitchen com
Wow what a nice build! Definitely a glam setup. :)
Havnmor thanks! We are building them now, check out @pullkitchen on Instagram :)
Nice drawer system 👍
Very nice. I want one.
Edward Ruvalcaba I did too
I got clearance from Michael as I am posting this a couple times, but if anyone might be interested I’m looking into producing some kitchen drawers, I put up a simple website to gauge if there’s interest. www.MotiveDesignsInc.com. Let me know!
Wow! I love the drawer! I’d like to do that in my pickup!
JZ WakkiZakko I’m looking into producing some for people, we will see
David Douglass I love it and think it would be an amazing addition to my truck. Since my topper is so low, I think the top would need to be a max of 14-15” tall to make my bed still work. I also want to carry a bigger water tank (18-20 gal) I have a sketch up of what I’m hoping to do.
3:35 save yourself some time.
I don't know why, but within the first 8 seconds of this video, I wondered if there was a "skip" comment. Thank you for your service.
Appreciate it. Hate the chit chat. Just get to it.
Thank you bro.
@@ENHall76 seems like you found it
I so love ppl like u save me some time
Really cool outdoor kitchen. Well done!
Awesome design.
Love it .... I have also fitted out my 80 with my own design I just didn’t like what was commercially available and anyway I just love to create and build stuff its the individuality that I love.....
Darren Mitchell I hear you. For me I like the idea of a complete system that isn’t permanently installed. I couldn’t find a unit so I built my own, and based on the crazy amount of interest I’ve partnered with an Apple engineer and we’ll be launching soon and at Overland Expo West. www PullKitchen com
Very nice...
It looks real wobbly. Would it be ideal to have a leg support?
It moves a little side to side in this DIY as only one slide was locking. In our production units both slides are locking. And the slides can hold a person
I cant even think of coming up with something like this! Amazing!!
Dave. Beautiful set up. I want to build something like that for my fj cruiser.
You can it it!
If you are interested in a modular kit I’m thinking about producing some in the possible future. Check out www.MotiveDesignsInc.com