This is exactly the problem. The only thickness guage that can measure individual layers is the DeFelsko Postitector 200. BUT it it will only work on plastic/composite. So theoretically if all panels, plastic and metal, you could get a measure for clear and subtract that value on all the panels that only can be measured by total thickness. But remember, this would only work if everything was painted the same .The whole measuring the paint is a gamble at best.
Fenomenalno brate, kao i uvek! Jedva čekam sledeći video. Primetio sam da ne koristiš više žutu Mirka vunu za grubu fazu poliranja. Čisto da znaš, ja je koristim po tvojoj preporuci i odradila mi je mnogo dobrog posla, tako da jedno veliko hvala tebi za sve savete do sad, pored tebe i još nekih momaka iz regiona zaista sam mnogo (teorije) naručio. Svaka vam čast, razvaljujete, a mi se vama ponosimo. 😉
Excellent work as usual but as you said this is only achievable with vehicles having 11:09 thickness above 200microns to start with BUT in our part of world a brand new car thickness won’t go beyond 100 on average or 120 occasionally😊keep up the good work👍
hello, love how cool your job is and get amazing result. i painted my car and orange peel was almost everywhere so i tried to do the glass finish all bodypanels. Trying cheap method like hand sanding with 1500x2000x2500 and trizak 3000,6000 and it came good but so slow.. then i tried 3m 1500grid on DI with wet and it destroyed it self and did pigtails everywhere... So i buy the kovax product it was "yellow" line 1500 and 2000 and soft pad for assilex paper with it.. but when i tried work with it on DI it imidiatly did the pigtails.. Now i see i made mistake and bought wrong paper, i shoud bought "super assilex" and "bufflex" line paper not "yellow". But not for sure the my mistake is it.. can you give me advice please. Yeah one more moment my DI is 125mm not 150mm may it cause my mistake too? sorry for stupid questions
I'm not able to purchase the Kovax Super Assilex sanding discs in low quantities. Are there any other ones you can recommend which are available for consumers? Incredible work!
Svaka čast i tebi Nidžo, super ti je zadnji video, a i generalno radiš izvrstno i mislim da smo mnogi od tebe puno koristnih stvari naučili. Hvala ti na tome.
if you're not an expert, then glue yourself, but if you've been doing this job for a long time, there's no need, because you've got a feel for it and it's hard to make a mistake
Perfect sanding work. As a DIY guy which do it once in a long time, do you think that a cheap sander (basic Bosh, Dewalt, Makita...)is better than hand sanding?
every sander is better than manual sanding, especially electric sanders do not leave marks that you cannot remove by polishing, while air sanders are very aggressive and I do not recommend working with them
Is it same to dry sand and wet sand a freshly painted car. I have difficulty to finish down after 3000grit. Always see deep into the clear sanding scratches.
if you're not an expert, then glue yourself, but if you've been doing this job for a long time, there's no need, because you've got a feel for it and it's hard to make a mistake
Professor at work 👏🏻👏🏻👏🏻👏🏻
tnx bro
The problem with the mil gauge is that it measures all the paint including primer and base coat, not just the clear coat.
This is exactly the problem. The only thickness guage that can measure individual layers is the DeFelsko Postitector 200. BUT it it will only work on plastic/composite. So theoretically if all panels, plastic and metal, you could get a measure for clear and subtract that value on all the panels that only can be measured by total thickness. But remember, this would only work if everything was painted the same .The whole measuring the paint is a gamble at best.
Fenomenalno brate, kao i uvek! Jedva čekam sledeći video. Primetio sam da ne koristiš više žutu Mirka vunu za grubu fazu poliranja. Čisto da znaš, ja je koristim po tvojoj preporuci i odradila mi je mnogo dobrog posla, tako da jedno veliko hvala tebi za sve savete do sad, pored tebe i još nekih momaka iz regiona zaista sam mnogo (teorije) naručio. Svaka vam čast, razvaljujete, a mi se vama ponosimo. 😉
Hvala ti a koristim je jos uvijek za tvrde lakove samo sto ne snimam sa njom
As always you are amazing, magician😎 Great job!💪👊
tnx my friend
nice demonstration
Tnx bro
Excellent work as usual but as you said this is only achievable with vehicles having 11:09 thickness above 200microns to start with BUT in our part of world a brand new car thickness won’t go beyond 100 on average or 120 occasionally😊keep up the good work👍
yes, you are right, I tested how much the coating will peel off, and it is 96 microns
hello, love how cool your job is and get amazing result. i painted my car and orange peel was almost everywhere so i tried to do the glass finish all bodypanels. Trying cheap method like hand sanding with 1500x2000x2500 and trizak 3000,6000 and it came good but so slow.. then i tried 3m 1500grid on DI with wet and it destroyed it self and did pigtails everywhere... So i buy the kovax product it was "yellow" line 1500 and 2000 and soft pad for assilex paper with it.. but when i tried work with it on DI it imidiatly did the pigtails.. Now i see i made mistake and bought wrong paper, i shoud bought "super assilex" and "bufflex" line paper not "yellow". But not for sure the my mistake is it.. can you give me advice please. Yeah one more moment my DI is 125mm not 150mm may it cause my mistake too? sorry for stupid questions
Awsome video maestro🤩
tnx my friend and enjoy
I'm not able to purchase the Kovax Super Assilex sanding discs in low quantities. Are there any other ones you can recommend which are available for consumers?
Incredible work!
perfection
tnx
A meni bas izlazi veceras video gde isto objasnjavam oko merenja laka i smirglanja duboke ogrebotine :D Dobra prezentacija! :)
hvala ti,sretno sa kanalom
Svaka čast i tebi Nidžo, super ti je zadnji video, a i generalno radiš izvrstno i mislim da smo mnogi od tebe puno koristnih stvari naučili. Hvala ti na tome.
Ahh i wish I had the time money space equipment knowledge skill oh and a loyal customer base then life would be great.
Complimenti, SEI number one Top Top, Saluti dall'Italia
Amazing!!
Doktor si….💪💪💪
hvala ti
Great video. I've learned so much from you. Do you recommend putting protection tape on edges? Thank you!
if you're not an expert, then glue yourself, but if you've been doing this job for a long time, there's no need, because you've got a feel for it and it's hard to make a mistake
@@Amddetailing Thanks.
Do you ever use Mirca guide coat powder?
Perfect sanding work. As a DIY guy which do it once in a long time, do you think that a cheap sander (basic Bosh, Dewalt, Makita...)is better than hand sanding?
every sander is better than manual sanding, especially electric sanders do not leave marks that you cannot remove by polishing, while air sanders are very aggressive and I do not recommend working with them
THX 😀😀😀😀😀
what products do u recommend with the wool to brang the shine back.. i have 3D one and the 3m perfect it
Amazing video! Would love to discuss potential collabs with you, is there an email address where we can reach you?
How many Buflex discs do you Need to Sand an entire car like that One?
Great ❤ wich wool do you use on rotary machine ?
Tnx Ewocar Woll
Doktor!
of course it's badly painted, do you have eyes or is this good for you, if this suits you, change your profession, this is not the job for you
Is it same to dry sand and wet sand a freshly painted car. I have difficulty to finish down after 3000grit. Always see deep into the clear sanding scratches.
Wrong paper choice. Use better quality paper and ensure you sand uniformly.
Hello sir, I have a new batch of polishing machines recently. Would you be interested in helping me test them?
Need to tape up the body lines.
if you're not an expert, then glue yourself, but if you've been doing this job for a long time, there's no need, because you've got a feel for it and it's hard to make a mistake
Perfektno!!