This is a screw feeder vs a screw conveyor due to the material being fed by a hopper. You need to put a shroud directly down stream of the inlet to prevent flushing of material. Also it would be helpful for the inlet section flights to be half pitch then transition to full pitch midway through the shrouded section. This will lower the trough loading so that you aren't passing material over the hanger bearings, you will have issues because of the material contamaniting the hanger bearings causing wear. Good Luck.
It's not a better choice 😜 because sugar crystals broken due to screw or body friction.... Please consider bucket inclined conveyor or food grade clited belt which be est for it
This is a screw feeder vs a screw conveyor due to the material being fed by a hopper. You need to put a shroud directly down stream of the inlet to prevent flushing of material. Also it would be helpful for the inlet section flights to be half pitch then transition to full pitch midway through the shrouded section. This will lower the trough loading so that you aren't passing material over the hanger bearings, you will have issues because of the material contamaniting the hanger bearings causing wear. Good Luck.
The song in the video? Can you tell me my friend.
Did you have intermediate bearing?how would you able to lubricate it?
Cuanto producto queda en el fondo?
What is the blade-like device at the middle for? It is like it "passed through" the screw conveyor?
That's called a hanger bearing.
Good👍👍👍💖💖💖
Viva Arquimedes..!!
It's not a better choice 😜 because sugar crystals broken due to screw or body friction.... Please consider bucket inclined conveyor or food grade clited belt which be est for it
Eski motor kitne hp ki hai aur iski rpm kya hai
Materials fill percentage in the conveyor was too high for hanger bearings...
Here is another trusted product and supplier you may be interested in th-cam.com/video/wX6j6oejSLc/w-d-xo.html
Contact num