Worlds Fastest Tamiya Top Force 71Mph ! - 4s Lipo Brushless - Speed Run
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- Here is my Worlds Fastest Tamiya Top Force on 4s Lipo guys. 71Mph...Enjoy! 😀🚀
Cheap fast motor...get it here: amzn.to/3t8CpAa
Speed controller esc...get it here 👉alnk.to/7WXyaGC
Speed control program card here 👉alnk.to/87Sj9xu
Hi guys! The fastest Tamiya Top Force I could find on the internet was 70Mph or 112Kph HERE: • World's fastest Tamiya... Well if this is the Worlds Fastest Tamiya Top Force then I believe it WAS the Worlds Fastest Tamiya Top Force and as of now and I hold the new record of 113.6Kph or 71Mph 👍😄 Thanks for watching guys. Please Like And Subscribe.
Chargers Here 👉alnk.to/bEbsIa8
Low Cost Good Charger 👉amzn.to/2PO9JNk
Batteries Here 👉alnk.to/2FuOwMJ
Spektrum Smart Charger & 3s smart battery bundle 👉alnk.to/dAfNwln
Spektrum Smart Charger & two 4s smart batteries bundle 👉alnk.to/b7rbLWv
Spektrum Smart Charger & two 6s smart batteries bundle 👉alnk.to/cwLfDtu
Batteries Here: 👉alnk.to/2FuOwMJ
BEST low cost Radio transmitter with longest range
RadioLink RC6GS V2 Radio here:👉amzn.to/3cFplf7
RC Car Speed GPS here: 👉bit.ly/2PHiVDk and here alnk.to/dpl2mdU
Motors & Esc's
Hobbywing 👉
Castle Creations 👉alnk.to/gVEbZ2v
Spektrum Firma 130amp Esc and Motor combo 👉alnk.to/7qdh0L3
Tools I Use HERE:
Hex drivers. Good quality & tight fit: amzn.to/3m88iWl
Soldering iron amzn.to/3BYxdSD
Solder: amzn.to/31ExE4y
Pencil torch: amzn.to/3djYyUS
Velcro: amzn.to/3sL9MZ2
Double Sided Tape Heavy Duty amzn.to/3bQVbV4
Cheap Good Quality Motor & Esc Combo's
1/10 scale
3650 4300KV motor and Esc combo amzn.to/36lbEi1
1/8 scale
3660 Brushless motor & Esc Combo amzn.to/3qnXasq
3670 Brushless Motor, 120amp Esc Combo amzn.to/3fzxV0W
Cheap Good Quality Brushless Motors
1/10 scale
3650 5900kv amzn.to/2LVF9j4
3660 3800kv amzn.to/3qseAku
1/8 scale
3670 2850kv amzn.to/3sx99Tb
3674 2250kv amzn.to/39ESlRv
Cheap Good Quality Esc's
60amp Esc amzn.to/3D06I0b
80amp Esc amzn.to/3dsDviP
120amp Gool RC amzn.to/3o0rzZe
Crawler motor & esc good quality HERE amzn.to/304J6cP
Camera and mount HERE:
GoPro Hero 8 that I use: amzn.to/31CuP4g
Camera/Phone mount for your RC transmitter:amzn.to/3md0oej & here amzn.to/3rE2SU3
#WorldsFastestTamiya
#TamiyaTopForce
#TamiyaBrushless
Worlds fastest Tamiya,
Worlds fastest Tamiya Top Force,
Tamiya 3s Lipo,
Tamiya Brushless,
Tamiya Top Force,
Tamiya Back flips,
Tamiya Backflips,
Tamiya bashing,
Tamiya skatepark,
Tamiya Hornet,
Tamiya Frog,
Tamiya TT02,
Tamiya Monster Beetle,
Tamiya Avante,
Vintage Tamiya RC,
Tamiya Sand Scorcher,
Tamiya Speed Run,
Congratulations! This has to be the 2nd best TopForce video on TH-cam, the best vid is your backflipping TopForce👍 Nice T shirts by the way, get a the Transformers bumblebee one next!
Thanks buddy. I appreciate that. It's the fastest Top Force on TH-cam currently. I didn't even use the optional speed gears. I could hit 80mph if I had those gears.
Very nice speed test brother, love that tamiya👍🙂, nice job
Thanks for watching my friend! Yeah she is very stable at speed. It's fun making things go fast that really shouldn't. It's a buggy and an old desighn from 1991. 114Kph pr 71Mph ain't bad. I know it could go much faster of I could mod the gearbox to take a big pinion. 😄
Thats one fast top force very cool💯😀👊👊
Thanks brother! Also for the sub. I got you back. 👊😀 The Top Force is very stable at high speed. I'm thinking if I can find the high speed 66T spur I will try for 80 plus Mph. I think it can go faster. The sad thing is there is no way to get a larger pinion in there so that's that. I bet this thing could do 100mph with gearing...lol.
@@KaizerTest wow 80 would really be moving thanks for the sub i appreciate it
@@AdventureTimeRC No problem brother.
Nice video..
Can you please do comparison between scx 24 deadbolt/jeep and c10..which one is best? I am planning to buy one but confused which one to buy.
I'm thinking to get one of these little crawlers but there's already a few videos out on these and even a comparison of the ones you are looking at. Thanks for watching my vid though I appreciate the support brother. I might do a vid on these mini crawlers in the near future. They look really cool for fooling around in the house. Heres the comparison vid I found th-cam.com/video/6im9mMndLu4/w-d-xo.html It seems the SCX24 is slightly better.
Holy moly! How did I miss this video?! Congrats brother!
Thanks bro...I thought you saw it. This car drives better than my onroad car in a straight line...lol. All I added were foam tires, Max 10 esc and 4s battery. All stock gears...hahaha. I bet I can get it to 80Mph but after that I would need to do something custom to run a big pinion. I could go up to bigger foam tires if I could find any.
@@KaizerTest 80 in the future for sure bro
@@philthyco1 Thanks my brother. I can't take this car any faster without the optional speed gear set and they are sold out everywhere. Could be discontinued. The only other option would be bigger foam tires and a higher Kv motor. If I took it to my speed run road it would probably do 75Mph as it sits now. But I have bigger fish to fry. I need to get my Slash 4x4 and infraction to 130Mph.
@@KaizerTest Nice but to be honest there are a bunch of infractions and slash's lol..Not many top force's ..I hope you find the high speed gear set you are looking for!
@@KaizerTest TA-02 high speed gear set..Found it on ebay just now but it's over $40 lol
Wow😎👍 congrats👏👍
Thanks brother. 😄
That tamiya is moving bro! Fast!
I've got that esc in my Slash
Hehehe...yeah I got it going faster than I thought I could. Its completely stock other than electronics and foam BSR tires. I wish I could have some kind of adjustable motor mount so I could gear it up. Its really stable I bet I could get it to 100mph with gears.😀
She moving pretty good alright!!😂😂your neighbour can move too!
Hahaha....yeah it was a fun day. I was surprised at how fast she went on stock gearing. Might be able to get 80-85Mph with the speed gears.
@@KaizerTest they just re re the evo!👍
@@Allthrashedout. I know....but crazy prices. To be honest...I'm more of a Hotshot, Super Hotshot, Monster Beetle, Subaru Brat kinda guy...lol. Boomerang is awesome too and not crazy expensive but I think it's discontinued for now. You getting an Evo? But back in the day I liked the 2 wheel drive buggies. I had a Falcon and Frog. My most expensive Tamiya back in the 80's was the Hotshot. By the time the 90's rolled around my last Tamiya was the Blitzer Beetle then I got into HPI and Traxxas. Then quit around 1995-96.
@@KaizerTest I have a hotshot with brushless, ww2 ,hornet and a unassembled frog, but my fav to is kind of embarrassing.. mad bull!!😹 with a few hop ups and bz tuned motor so much fun to drive just love that thing.. yeh top force evo is my dream car. I have a vqs on hold but not sure if i wanna transfer the deposit to the evo. All so much$$
@@Allthrashedout. Yes I love Tamiya's I have a lot of re-re's still but it's hard to dish out that much cash for an 80's old timer that will break if you drive it hard and parts can be hard to find for some of them. That's why I have both kinds of cars. New and old. I have a few Tamiya's I run sort of hard but for the most part I'm easy on them. The Arrma's are the ones that get punished...lol. I kind of like the Vanquish/VQS. To me the Tamiya's are about the 1980's nostalgia. I like the Vanquish better in my opinion than the EVO. You need a driver in a Tamiya...lol. I guess you could put one in the EVO too..
HOLY HANNAH!!! I love speed running rc anything and everything!!!!! 😎
Yeah my favorite is making cars that should be slow go fast...hahaha. I have an X01, an Infraction and a Limitless that I've never had on the road! It's a shame really. I will run them sooner or later...it's just time. I have a young family(although I'm not young..lol) and a lot of things other than RC to take care of....but I try to get some RC time in. I notice you crawl. I was thinking to get a crawler, I used to build offroad trucks and go 4x4ing. I had a Suzuki Samurai on 33" tires and a Suzuki Sidekick later with 33's. Thos elittle rigs went everywhere the jeeps did and more especially the Samurai because it was narrow. I'm looking at the Axial SCT10 ii 1955 Ford F100 as a first crawler. But can I go slow? I love fast.
@@KaizerTest going slow, is the new FAST!!! 😎
@@BUILTLIGHTWOUNDTIGHT It seems to be...its really popular.
@@BUILTLIGHTWOUNDTIGHT fancy seeing you here my love! Lol have a great day gentlemen!
👍Plastic...Fantastic. That shifts.👍
Thanks Paul! Yeah she books along nicely.👍😄
That was great by the way👍🏻
Thanks brother 👍😀 I always appreciate feedback. I do the best I can when I can scrounge the time for a speed run. I had a great day 2 days ago and went my all time fastest. Video will be up within a week. Thanks again for the kind words.
Very good speed runs 👊🏻👍🏻
Thanks brother. 👊
Congratulations 🥳
Thanks brother. 👊😀
Amazing
Thanks brother. 🍺🍺
What motor? Stock gears? I use 3s on 5900kv and blows up gearboxes on my top force. The "red" housing from ta-01 is stronger👍
Yes stock gears on a brand new build. Castle 7700kv motor and Hobbywing Max10 esc. Speed runs are easier on gears because you slowly pull the trigger and there isn't a lot of shock on the driveline.
@ jan You need the metal motor mount/heatsink
Congratulations on your numbers!!!
Thanks brother. I wan't expecting this car to go this fast....lol. I wish I could gear her up more.
Top Force is soo planted
Liike 5 Man 👌👏
Thank you brother. 😀
Just bought one of these kits, any tips on hop ups?
Keep the rear ball diff tight. Also use crazy glue to glue the rear diff input shafts that go into the rear diff. They tend to strip under high power. Other than that I ran the stock setup steering wise and just added the beefier electronics and street tires. This car is much tougher than I thought it would be. I still have one new in the box for later. It will probably be a shelf queen for my collection though. I have a lot of bashers already.
Good!!! Can you give me your wheel& tire information???
Thanks. I can't even remember what size tires I used. They were foam tires.
Top foce good👍
Thank you brother! I appreciate the support. 😃
Wow that was moving.
What was your nabour thinking of to be standing in the middle of the road he could of lost a foot there.
Congrats on the record.
What was I thinking doing speed runs on my street?! lol. He knew what I was doing and he was watching what the car was doing. I looked to see if it was clear but while my back was turned his ball rolled out onto the road...he was watching the car but I guess it's hard to judge how fast 71Mph is when it's an RC car..I don't know for sure but I'm glad I didnt hit him..hahaha. I got hit in the ankle at about 80mph but I was wearing high top sneakers and they had good ankle padding.
@@KaizerTest oh I didn't notice him grab a ball. I though he was watching the car in the middle of the road.
I seen a video you got hit in the ankle at speed I was expecting to hear it was broken in a update. But glad you got threw that cleanly.
@@fordnut71 Thanks brother. Yeah it hit me in the ankle but I was wearing high top sneakers that had a lot of ankle padding...thank God...lol.
Epic!!!!
Hare Krsna :)
😆🍺🍺
So 4S isn’t destroying the stock gearboxes?
Nope...not for speedrunning. If you take it offroad on 4s it might.
That was fast, impresive. Also the hardened prop shaft can take that much rpm! i thougt the thick aluminium was needed (GPM /Yeahracing) And i could feel your shaking 😂😂😂😂 the adrenaline. One mistake and your Top force was smashed in 1000 pieces💀
Hahaha...thanks brother. I did this car up because I couldn't get to my speed run spot often where I take my Slash 4x4 speed run car. Did 132mph with it so far. Amazingly the Top Force was very stable. More stable than my 97mph Tamiya TT02. If I could figure a way to modify the gearbox to change the gearing then I'm sure it would do 100mph. And yeah that prop shaft must have been flexing a lot...hahahaha.😅
@@KaizerTest Thank you for your response, 132 mph is extremely fast bro! I have also the TA01/02 and DF-01. Love it. There was a set of gears “high speed gear set” item 47393 or 53127 that would be your best bet, but it is hard to get one.....I hope one day too see them back in store again. Take care 👍🏽🧢
@@Dr-Pepper Yeah I looked for the gear set but didn't want to pay a crazy price for it. Probably only get another 10mph. Maybe one day. You take care too brother. 😃🍺🍺
The wing might give you a little more stability and help keep it planted on the black top .
Yeah thanks Eric. This road kinda sucks for speed runs...I drove over the manhole covers that were raised a bit and the car hopped...lol.
I'm mostly worried about the front lifting up though. I may take it for another run on my speed run road where I can open it up.😀
Either way 71 mph was amazing
@@ericwood2790 Thanks brother. I appreciate the support very much. Do you do speed runs?
KaizerTest RC No , , I don’t have a lot of places that are flat and long . Mainly bashing.
@@ericwood2790 I love bashing too.Pretty much all RC. I have been fascinated with RC since 1978.
I have made a discovery that might help you out: there is a Lego technic tire that fits on a 2.2 buggy rim and they are very stiff so won’t balloon much
Hahaha...that would be epic.😂
KaizerTest RC I might make a short tutorial video soon I just need to test them
@@gfdtjkitsxn7775 Sounds good bro. You may be on to something. If I could find foam tires slightly bigger than the ones I was running that would be cool too.
hey dude :) thanks heaps for subscribing! ive just subscribed back to you! :)
Thanks Matthew. I see you're an Arrma and Traxxas fan like me. That's awesome! I'm looking forward to seeing your vids to keep my RC obsession satisfied...lol. All the best bro.👍😄
You should see what a 50c pack 7.4 does to 10 to 15 degrees timing change on 27t brushed motor does.
Something tells me you tried that....lol 😂 Get more vids I want to see this stuff happen. 👍😄
@@KaizerTest yeah I have it on my grasshopper when the body's finished I will be showing videos of. I think it's 25 plus miles an hour with it. With a Tamiya dirt tuned motor.
@@bradkalman2353 Pretty sick. Yeah post the vids up when you can.
What you need is a little more downforce on the front end to keep that down. I do think for some of those cars there is a front air dam for them or spoiler.
Yeah I was thinking to tape a few weights to the front. I'm not planning to take this car much faster. I'm almost maxed out. I'm running a 7700Kv Castle Creations 3650 sized motor and I have my gears maxed out. This car isnt like the TT02 where you can have an adjustable motor mount and swap pinions and spurs to whatever you want. The gearbox only allows for minimal changes. There is a high speed gear set you can buy but its sold out everywhere. I could probably get it to 80Mph which is pretty damn fast for a vintage buggy...lol.
Did I tell you the vanquish is coming back in December as well as the 2011 avante.
Yeah I heard...Pretty sweet. I sold my 2 Avante 2011 kits recently. I just thought I would probably never build one to use like the Top Force(didn't want to trash one) so I let them go. I may grab a Vanquish to build. I still have like 30 unbuilt Tamiya kits..lol. Too many. I also have a bunch of Arrmas and a few Traxxas...so I'm good for awhile.
@@KaizerTest have you seen the new arrma felony and the Traxxas Hoss? I would go back and get that avante again by the way I don't think I could ever part with one of those.
@@bradkalman2353 Yeah I was torn whether I should sell the Avante's but for me I wouldn't want to run it. So it would be built...maybe run once and then shelved. As much as I love my Tamiyas I want to beat on my RC cars. I would kill the Avante and thats $500 Cdn I could put to something else. But yeah I see your point...I'm missing them already. But also thats not a car I lusted for back in the 1980's as funny as that may seem. I wanted a Hotshot and a Wild one. Also the Bruiser and the Monster Beetle ( I have 4 of these).
I was waiting to see the Felony, I didn't know they just revealed it! Thanks for the heads up I just took a quick peek...looks cool!
Aren't you trying to be like Stewart Mac and get a Tamiya to do more then 120 miles an hour?
Yeah to a point. I reached 97Mph with a Tamiya so far...my goal was 100Mph for a Tamiya. It's hard once you get that fast to squeeze more speed out. Aerodynamics really help at this speed. I like to bash my Arrmas as well. I like all disciplines of RC cars really.
Doesn't Tamiya contradict brushless
In what way?
@@KaizerTest It's just a joke, but tamiya never sold any fast (but I think there were one or two brushless ones indeed) rc cars
@@frogelpe9871 Yeah Tamiya had their heyday in the 1980's and I was right there enjoying it with them. My Slash 4x4 does 132Mph and my Arrma Felony does 119Mph but I still have a soft spot for building a Tamiya kit..lol. Childhood memories. My Tamiya TT02 does 97Mph currently. What cars do you like?
@@KaizerTest I personally got a soft spot for xray's lineup. I started out about 8 years ago with a 1/10 truggy called "rockhard 2" by a company named "reely" wich is basically a branch company of a big tech retailer here in germany. This rc vehicle was actually pretty bad, it rattled even at low speeds (22mph/35kmh) and parts of it broke very frequently (2 diffs within one month). As my second car I got an xray t2. I ran it at around 70km/h (around 45mph) before turning it into a drifter. Never had any problems with it, the only thing that broke over the 4 years of use were some bearings. It is also a lot easier to repair than my previous one. Now I plan on buying an xray xb8e for getting into bashing again. Need to buy a used one though, they're pretty expensive
@@frogelpe9871 Lol..Tamiya has some of the best and fastest racing cars ever built..TRF
You would have taken his ankle off. Lol
Yes maybe. I got hit in the ankle at 80mph. But I was wearing High top sneakers and Idid a side flip to avoid the full hit. It's in my TT02 97mph vid.
I hear they're still a company that makes belted tires for 10th scale cars.
I'm using Johns BSR Foams.
@@KaizerTest those phones to get chip to pieces and mangled doing that and cause problems you should look into belted tires.