Bro fire pump and diesel pump rendum different flow rate la irukalama? Like fire pump 188 m3/hr and diesel pump 137 m3/hr. Enga plant la nanga apdi tha install pannerukom so again vera plant la install pannanum nange ithaiye follow pannalama?
Correct tha flow rate different ah irutha pressure drop la difference romba irukkathu.. Delivery line diameter ku evaluation water tha varum so pipe diameter nu pakkanum
Good question... Normal tha... Line empty la irukkum pothu, line la air irukkum, so electrical or main pump ON panni... Line la ulla air release panna pothum
Charging a fire hydrant process 1. Find the hydrant. 2. Check it for damage. 3. Attach a hose to it. 4. Open the hydrant valve slowly to let water flow into the hose. 5. Flush out any dirt or debris. 6. Fully open the hydrant valve to fill the hose with water. 7. Check the pressure. 8. Test the hydrant to make sure it works. 9. Disconnect the hose when finished. 10. Close all valves and secure the hydrant.
நான் தண்ணீரை ட்ரை பண்ணிட்டேன் ஆனா நான் திரும்ப தண்ணி ஃபில் பண்ணும்போது ஜாக்கி பாம்பு போட்டா பிரஷர் ஏற மாட்டேங்குது பிங்கர் பம்புக்கு பிரஷர் இருக்கு ஜாக்கி பம்புக்கு பிரஷர் ஏறவில்லை என்ன காரணம் பிங்கர்பம்ப் பிரஷர் ஃபுல்லான பிறகு ஆட்டோவில் கட் ஆகவில்லை
1. Locate the Hydrant 2.Inspect the Hydrant 3. Connect Hose 4.Open Hydrant Valve 5. Flush the Line 6. Charge the Line 7. Monitor Pressure 8.Test Hydrant Operation 9.Disconnect Hose 10. Ensure valve are closed 11. Record Information
1. Find the hydrant. 2. Check it for damage. 3. Attach a hose to it. 4. Open the hydrant valve slowly to let water flow into the hose. 5. Flush out any dirt or debris. 6. Fully open the hydrant valve to fill the hose with water. 7. Check the pressure. 8. Test the hydrant to make sure it works. 9. Disconnect the hose when finished. 10. Close all valves and secure the hydrant.
Thank you bro tmro enaku interview Erika Unga video helpful’a erunthuchu❤❤
Super , thank you for your valuable feedback.
Iinnoru fire pump room video irukkum athum parunga
Bro ippo jockey pump running for pressure and ippo if electrical pump also running means jockey pump will cut off or both pump will running ahh broo
Pressure reach aanathum cut off aagum.. If electrical pump start running pressure increase more, so jockey pump cut pressure reach easily,
@@knowyoursafety2040 👍🙏 Thanks bro
Bro fire pump and diesel pump rendum different flow rate la irukalama?
Like fire pump 188 m3/hr and diesel pump 137 m3/hr. Enga plant la nanga apdi tha install pannerukom so again vera plant la install pannanum nange ithaiye follow pannalama?
Correct tha flow rate different ah irutha pressure drop la difference romba irukkathu.. Delivery line diameter ku evaluation water tha varum so pipe diameter nu pakkanum
Depends on design as per requirements, build height depend panni design pannuvanga
Pre Auction system pathi sollunga Anna
Pre action system LPG tank ku use pannuvanga, open and close sprinkler type irukkum
Oru video podalam
Pipe line charging eppadi
Good question...
Normal tha...
Line empty la irukkum pothu, line la air irukkum, so electrical or main pump ON panni... Line la ulla air release panna pothum
Air release correct ah pannanum... Illa na air lock aayidum
Charging a fire hydrant process
1. Find the hydrant.
2. Check it for damage.
3. Attach a hose to it.
4. Open the hydrant valve slowly to let water flow into the hose.
5. Flush out any dirt or debris.
6. Fully open the hydrant valve to fill the hose with water.
7. Check the pressure.
8. Test the hydrant to make sure it works.
9. Disconnect the hose when finished.
10. Close all valves and secure the hydrant.
Neega line la water charge pannurathu kettingala illa hydrant line charge pannurathu kettingala
நான் தண்ணீரை ட்ரை பண்ணிட்டேன் ஆனா நான் திரும்ப தண்ணி ஃபில் பண்ணும்போது ஜாக்கி பாம்பு போட்டா பிரஷர் ஏற மாட்டேங்குது பிங்கர் பம்புக்கு பிரஷர் இருக்கு ஜாக்கி பம்புக்கு பிரஷர் ஏறவில்லை என்ன காரணம் பிங்கர்பம்ப் பிரஷர் ஃபுல்லான பிறகு ஆட்டோவில் கட் ஆகவில்லை
Jockey pump 2-5 hp tha irukkum so water flow low. Pressure increase aaga time eadukkum, ..
Hydrant charging procedure
1. Locate the Hydrant
2.Inspect the Hydrant
3. Connect Hose
4.Open Hydrant Valve
5. Flush the Line
6. Charge the Line
7. Monitor Pressure
8.Test Hydrant Operation
9.Disconnect Hose
10. Ensure valve are closed
11. Record Information
1. Find the hydrant.
2. Check it for damage.
3. Attach a hose to it.
4. Open the hydrant valve slowly to let water flow into the hose.
5. Flush out any dirt or debris.
6. Fully open the hydrant valve to fill the hose with water.
7. Check the pressure.
8. Test the hydrant to make sure it works.
9. Disconnect the hose when finished.
10. Close all valves and secure the hydrant.