As i can see in the video , for this specific cluster of A4, there is no need to solder anything . there is a zif socket . Do you ship this LCD worlwide ?
Hi it seems I have a short on mine. It displays fine every now and then when o first start the car hit as soon as I put the car into gear or open a door it goes out :/ any ideas ?
It's a stepper motor. Likely what he is doing is to set it way below 'zero' so it will recalibrate. If you see that the needles move in position you're ready to go.
I went to the junk yard, found a connector, then googled few Audi forums for the instrument cluster pinout and soldered a couple wires. Been more than a decade ago.
Hi.i know this is an old video.thanks you for the information. Wandering id you can gimme info on what pin or wire I should use for RPM signal on an Audi b7
The display for Audi A4 B6 2001-2004 is the same as the one for Audi A4 B5? I'm from Portugal and I would like to know if the Audi A4 B5 fits also for my car please. The instrument cluster is identical to the one in the video.Tks.
I replace my lcd but i dont figure out how to back meedless back...i dont use a jack to enter them.i right possion i just back them vouple of times and point them about mm from first line...and now when i am braking they dont going back good...they are backing slowly and stoping...? Can you help me?
Hello my friend you think the Instrument cluster controls the climate control light, the alarms, the indication signals, key not unlocking nor locking via remote. If you could reply back would be a great help. need to find out if my one needs resoldering as mentioned above neither of those work lol. The button to change the display ain't working an also doesn't let me sync keys using the method from manual book lol
Thanks for this video! I just replaced my screen and it seems to be a lot more dim than the old one. Do you think that is just the screen? Or maybe I didn’t get it plugged in all the way?
Ty Woodruff , it’s most likely the design of the replacement screen if you didn’t plug it all the way properly you won’t see anything on it. But since you see the information, but it’s more dim than the original - it’s just a way the replacement screen is.
A lot of used A4 owners don't know but there is also a cluster dimmer control. The `+´ and `-´ buttons to the left bottom of your cluster controls this. Some you just press and hold....some you have to click up or down. Try that.
@Best Pixel Repair @Best Pixel Repair hey, if a couple of the "fingers?" or the connections on the board get lifted off during the removal of the old LCD Display is it possible too save or is the hole board shot??? Any help will be awesome!? Thank-you!
I have an '01 A8L, the time/date and mileage recorder screens seem to fail from heat. Cannot locate a place to buy replacements. Where can I find them?
Can i buy another cluster that has that screen colored, and just swap it with my screen that is just red letters? Will it work without coding or do I need to code stuff for it to work?
I have a audi a4 1.8t quatro avant b7 2004, can i get back my old kilometers if i do this? And i dont have the equipment needed so are they going to do these at audi repair shops or?
Fine video, i like to know the pins you used for the electric power, and i need to understand the procedure you make with rpm and km clock hands......thanks
Hello, there are three types of display. Red monocrome, color monocrome and the color LCD (black,red,yellow colored). Is it in all types the same way to repair it. Where i can buy that color LCD?
Hi Sir, Nice video. I going to repair my lcd pixel soon. Just wonder is it the same way. My lcd pixel is black blackground white wording. Skoda octavia year 2006 ,fsi 2.0 Please advise. Thanks.
@@HETPEZBYou write in title Instrument Cluster Pixel Repair, but is Instrument Cluster Display Replacement. It is not a same thing. So, no one talk about instruments cluster replacement.
![Как заменить стеклоподъёмники на AUDI A4 (B7) [ВИДЕОУРОК AUTODOC]](http://i.ytimg.com/vi/pEW7FmMYKwo/mqdefault.jpg)
As i can see in the video , for this specific cluster of A4, there is no need to solder anything . there is a zif socket . Do you ship this LCD worlwide ?
Hi it seems I have a short on mine. It displays fine every now and then when o first start the car hit as soon as I put the car into gear or open a door it goes out :/ any ideas ?
Hi where can the new replacement lcd be bought. From the uk. Many thanks. Great video
Is it possible to just change the whole dash board ?
Can you just fit the lcd display on the pixel cluster or do they differ
What do you call that procedure that you're doing with the speedo and rpm needles? How important is it to do it exactly how you did it?
It's a stepper motor. Likely what he is doing is to set it way below 'zero' so it will recalibrate. If you see that the needles move in position you're ready to go.
Where can i buy the pixel cluster to replace please
May u share how to make the workbench tester cable
I went to the junk yard, found a connector, then googled few Audi forums for the instrument cluster pinout and soldered a couple wires. Been more than a decade ago.
Hi.i know this is an old video.thanks you for the information.
Wandering id you can gimme info on what pin or wire I should use for RPM signal on an Audi b7
I would guess, that this would be a part of the communication bus/line, not a separate RPM wire.
@@HETPEZB can bus.can I just tap into one of these wires
Hello, do the needles have positioning or it doesn't matter how you insert them it will reset to default position? Thanks
You need to make a note to yourself the default position you removed them from.
Hi, is there any way to change the color of those red leds to white or anither color?
There is, but most likely not worth it.
Ottimo e istruttivo
The display for Audi A4 B6 2001-2004 is the same as the one for Audi A4 B5? I'm from Portugal and I would like to know if the Audi A4 B5 fits also for my car please. The instrument cluster is identical to the one in the video.Tks.
Nope, different display. B6 plug and play, B5 requires soldering.
I replace my lcd but i dont figure out how to back meedless back...i dont use a jack to enter them.i right possion i just back them vouple of times and point them about mm from first line...and now when i am braking they dont going back good...they are backing slowly and stoping...? Can you help me?
Hello my friend you think the Instrument cluster controls the climate control light, the alarms, the indication signals, key not unlocking nor locking via remote. If you could reply back would be a great help. need to find out if my one needs resoldering as mentioned above neither of those work lol. The button to change the display ain't working an also doesn't let me sync keys using the method from manual book lol
Thanks for this video! I just replaced my screen and it seems to be a lot more dim than the old one. Do you think that is just the screen? Or maybe I didn’t get it plugged in all the way?
Ty Woodruff , it’s most likely the design of the replacement screen if you didn’t plug it all the way properly you won’t see anything on it. But since you see the information, but it’s more dim than the original - it’s just a way the replacement screen is.
A lot of used A4 owners don't know but there is also a cluster dimmer control. The `+´ and `-´ buttons to the left bottom of your cluster controls this. Some you just press and hold....some you have to click up or down. Try that.
@Best Pixel Repair @Best Pixel Repair hey, if a couple of the "fingers?" or the connections on the board get lifted off during the removal of the old LCD Display is it possible too save or is the hole board shot??? Any help will be awesome!?
Thank-you!
Do you have a shop where I can bring my car to get this done ;) ?
I have an '01 A8L, the time/date and mileage recorder screens seem to fail from heat. Cannot locate a place to buy replacements. Where can I find them?
My wild guess is yank yard. Lot of A8 are there. Purchase the donor cluster and grab the screens from it.
spectacular job!!! very nice and neet ! were do you get the parts from
how much is just the replacement LCD scene for 2003 audi a4 1.8t?
Can i buy another cluster that has that screen colored, and just swap it with my screen that is just red letters? Will it work without coding or do I need to code stuff for it to work?
I’m pretty sure that simple swap won’t work without a programming.
@@HETPEZB thank you for the help
where can I order a new color pixel for Audi a4 b6 1.9 tdi?
Probably nowhere.
thanks for the video was very helpful! was wondering if you'd share the music with me? its so terrific. thanks again :D
nice video , is this a repair because of an intermittent LCD display, it only does it at times, other times it's fine?
Heat seems to be the problem. For what I understand, replacing the screen fixes it.
I have a audi a4 1.8t quatro avant b7 2004, can i get back my old kilometers if i do this? And i dont have the equipment needed so are they going to do these at audi repair shops or?
Odometer is not affected. Easy repair. No need for a shop :)
Is there anyway to remove that red background on the cluster screen?
You can replace backlight LEDs to whatever color you want.
Can you install an autoradio 1din for Audi A4 B6... Tank you for share
Fine video, i like to know the pins you used for the electric power, and i need to understand the procedure you make with rpm and km clock hands......thanks
Nice ! can you change to BLUE ? 😎
Hello, there are three types of display. Red monocrome, color monocrome and the color LCD (black,red,yellow colored). Is it in all types the same way to repair it. Where i can buy that color LCD?
What I'm curious about - what is color monochrome LCD?
Everything looks so fragile! At 3:55 I was like 😳😳 nope. Just gonna let my screen be faded, to scary to do myself! 🤣
This one is actually one of the easiest clusters to work on :)
Hi Sir, Nice video. I going to repair my lcd pixel soon. Just wonder is it the same way. My lcd pixel is black blackground white wording.
Skoda octavia year 2006 ,fsi 2.0
Please advise.
Thanks.
We don’t have Skodas here. Can’t advise.
X cortesia dov'è siete
Good job, but you could have cleaned it before reassembling it because it looked dirty
Annoying music
This is a Replacement not repair...anyone can do that !!!
Was the cluster replaced? Think before you about to say something, otherwise some other may laugh..
@@HETPEZBYou write in title Instrument Cluster Pixel Repair, but is Instrument Cluster Display Replacement. It is not a same thing. So, no one talk about instruments cluster replacement.
In the beginning cluster had missing pixels. After the repair - no missing pixels. Was cluster repaired?