How To Lay A Brick Windowsill
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- I show you how I last a brick windowsill. I teach how to lay out the brick work and see how many brick you need using a brick ruler. Next I show how I spread and head the mortar for the brick. Then I teach you how I set the brick in the windowsill. Once I lay all the brick I show you how to point the windowsill using a plastic pointer. The last thing I do is brush it down and wipe the excess mortar off with a rag to clean it up nice. Thanks for watching!!
Please subscribe to my channel! -
/ @masonthemason6412
Want to learn more about laying brick? Click on the links below to learn more!
How to lay brick to the line-
• How to lay brick to th...
• How To Lay Brick To Th...
How to lay a brick wall-
• How to lay brick walls
• How to lay a brick wall
How to point a brick wall-
• How to point a brick wall
How to lay a brick windowsill-
• How To Lay A Brick Win...
How to set up a story pole/profile-
• How To Set Up A Story ...
Just laying brick-
• Laying brick
• How I got into the trades
Below sills should have flashing.
Here’s another tip bud. For brick work its better to use a bit smaller of a trowel. That shovel is good for block not brick. And especially not when your doing tight work like that. My preferred trowel is a 9-9.5” rose amber handle trowel for brick work. Mine was 9.5 but is worn down to around 8.25 now lol it’s super fast for brick and doesn’t kill the wrists when you get to be 37 like me and still at it lol
shouldn't you have 15 degree down slope on that sill so water drains? Otherwise you could get pooling
Yeah
I’m just learning but here in the Midwest most builders won’t allow brick for window sill anymore . How much slope is on those it’s hard to tell in the video. Builders here want a solid piece of stone or concrete that looks like stone. The builders claim to many joints that allow water and to much maintenance in the future when using brick .The guy I just started work for charges the same and laying a single stone or concrete only takes a couple minutes tops so he likes it better also . Love your videos keep them coming.
Looking sharp man!
Thanks Frank!
Love the channel, Keep Pushing out the Content
Keep grinding brotha your putting out great content
Thank you!!
More pitch on sill is better to drain water.
Thanks for the video 👍
Thanks for watching!
Looks good should have mentioned when determining what number you're going to use on the ruler make sure you leave a joint at the end and the other thing I was taught to fill those holes in the brick when you're doing a window sill I usually use a three-quarter inch piece of wood to follow for the overhang but that works
Yeah I should have. I made the mud fat I'm sure it got in the holes, at least I hope lol
Joints on any internal masonry angles should be finished flat and flush not tooled with a jointer. Same thing for joints internal for a corner on brick or block.
Good job it's called a rowlock brick on edge 15 degrees pitch
Got it. Thanks
None of your perp joints are full. Why not just make full perp joints in the first place, rather than going back with your pointer and kind of "half" filling them? Also, where is your flashing and your weep holes?
did u change the name to your channel, I've been getting notified and didn't know who this was, wyat and sons
I will make sure to start clicking in. will u do me a favor and check out my newest1. im trying to get some of those buttons hit on it.. to help the vid out
Yeah I did
I will
@@masonthemason6412 thanks bro! Do u know concrete w the haus? From pa?
No I don't
Voids in bottom of your joints is bad.
Bro.
Where do I get that clear tool