Thank you simple instructions and for the book to say you have to go to a Dealership is Ludicrous for a bulb that small!!!! Love my Toyota have 337,000 miles 😊
Actually, I have the same car. You're not supposed to pull carpet free without removing the plastic pieces first. You stick a phillips screwdriver in and turn it very slightly until the center of it pops open. Then it comes out easily. Yanking the carpet out without removing these it's probably why they're breaking.
Although it was 20 minutes long, I enjoyed your video...and your accent! Your advice to only remove the top section of the liner and to pop the plastic rivets out from behind the liner was AWESOME! Thank you for your help! =o)
I watched your video now I am ready to go change my bulb(s). Since you reminded me to do both. Maybe the cops won’t pull me over for this again for awhile. Haha. Thanks Pete
Hi, Your video helped me to figure out how to do and buy what is needed like bulbs & carpet rivets. Thanks for all the details. I have to replace bulb & plastic rivets, original one's broke while removing.
Thank you very much for showing me how to do this it was driving me crazy trying to figure it out. However, you should consider putting subtitles in your videos simply because you were very very hard to understand, sorry to tell you but it's the truth. Other than that awesome video in earned my like!
Peter Finn not difficult if you understand English. He only as. Has an accent. Not a dialect issue. Geeezzzz. It’s harder to understand southerners in America
*** Just want to add this quick but important input if your Camry has an emergency trunk release handle. The way to remove the "carpet or liner" to get easy access to the license plate bulbs would be to - remove all the rivets to free up the carpet. Then slide the carpet over the emergency release handle. The rest of the work is pretty easy. ***
Wow that is an involved process for just a license plate bulb! On the 97-01 models, the screws holding the lens and socket in are mounted outside- no need to take the trunk lining apart. Not sure why they had to complicate everything.
The black plastic fabric "stays"... If you see rings, try to remove the inner ring with a screwdriver. On my car it was a peg that spread out the outer ring causing it to grasp the frame and hold tight. Just forcing it - as shown - breaks the plastic stays. Pulling out the center post first, should cause the outer ring to contract so you can wiggle it out. MRW
I need to remove the entire light housing to clean the lens, it's foggy and doesn't look good. Do you know how to remove it!? BTW thanks a lot for the video!!
6 minutes in and you still didn't get to the point, also you're missing thr emergency trunk release lever, which is the real hard part of this operation.
Just because his accent is different, that doesn't make it wrong. Maybe your accent is a turn-off to others. You can't complain that you left without the knowledge, just that you left.
You spent eight minutes and explaining something it takes 2 minutes to do why don't you just go straight to it and study explaining everything and when your next video I was going to sleep after 2 minutes
Thank you simple instructions and for the book to say you have to go to a Dealership is Ludicrous for a bulb that small!!!! Love my Toyota have 337,000 miles 😊
Bfa Littlebit mines still 302k+ atm. Getting up there lol
@Frank. T 2005
Omg: bulbs are good. Thanks for your patience and time making this excellent work available.
Glad you like them!
Actually, I have the same car. You're not supposed to pull carpet free without removing the plastic pieces first. You stick a phillips screwdriver in and turn it very slightly until the center of it pops open. Then it comes out easily. Yanking the carpet out without removing these it's probably why they're breaking.
Yea I followed his directions and the first one broke. Removed the rest of them by removing the center but it was not easy even with a screwdriver.
Although it was 20 minutes long, I enjoyed your video...and your accent! Your advice to only remove the top section of the liner and to pop the plastic rivets out from behind the liner was AWESOME! Thank you for your help! =o)
Thanks for Your positive comment. :-)
Great advice!
I just bought a 2003 Toyota Camry. The rear license plate light were not working. Thanks to you, am going to fix it. Thanks..
Good and Thanks :-)
Thank you! Following your instructions, it took only 20 minutes.
Thank You for Your comment. :-)
You be ass dumb
I watched your video now I am ready to go change my bulb(s). Since you reminded me to do both. Maybe the cops won’t pull me over for this again for awhile. Haha. Thanks Pete
Thanks. Good feedback. :-)
Did you do it successfully?
Your accent makes me so happy. I don’t know why but I love your voice.
Thanks. My voice is popular.
You don’t know it but you just helped me get the job done 🥳
Hi, Your video helped me to figure out how to do and buy what is needed like bulbs & carpet rivets. Thanks for all the details. I have to replace bulb & plastic rivets, original one's broke while removing.
Hi and Thanks for your comment. :-)
Thanks for your help. It was useful to me
Thanks
Thanks so much for this video. It was very helpful!
Thank You for Your comment. :-)
Thank you very much for showing me how to do this it was driving me crazy trying to figure it out. However, you should consider putting subtitles in your videos simply because you were very very hard to understand, sorry to tell you but it's the truth. Other than that awesome video in earned my like!
Thanks for comment. :-)
Peter Finn not difficult if you understand English. He only as. Has an accent. Not a dialect issue. Geeezzzz. It’s harder to understand southerners in America
Thank you for the instructional video!
Thanks !
Very nice instructions. Thank you.
Thanks, Your support is Great. :-)
Too long to get to the point.
Ok
I was now about to say the thing a 2 minutes video stretch to almost 30 minutes
its ridiculous
Exactly
Thank for the heads up. Bulbs are fixed now
*** Just want to add this quick but important input if your Camry has an emergency trunk release handle. The way to remove the "carpet or liner" to get easy access to the license plate bulbs would be to - remove all the rivets to free up the carpet. Then slide the carpet over the emergency release handle. The rest of the work is pretty easy. ***
Noted
9:00 you’re welcome
Ok and Thanks :-)
Thanks I needed that ma man!
I enjoyed listening... that you!
Great comment, I appreciate your feedback ! 👍😀
Thank you, Peter!!! This video is perfect!
Thank You for comment. :-)
Peter Finn I was able to change my bulbs today thanks to you!
Suomalainenn poikka.kiitos!
Hi and English please, :-)
Awesome, thank you for the video
Hi and Many Thanks for feedback. :-)
Thank you for the help. Cool accent by the way :)
Ok and Thanks for info.
The cops pulled me over last night in my 2002 Avalon. Hope the mechanism is similar.
thank you nice vedio I t was helpful 😘
Thank You for feedback. :-) Best Regards Peter
Thank you so much.
Always welcome
Wow that is an involved process for just a license plate bulb! On the 97-01 models, the screws holding the lens and socket in are mounted outside- no need to take the trunk lining apart. Not sure why they had to complicate everything.
Hi my Friend and Thanks ! :-)
They wanted to add work for their shops and dealerships to complete. My dealership wants to charge $40 for this service.
thanks pete good job
You are welcome and Thank You for Your feedback. :-)
Thank You
Welcome!
The black plastic fabric "stays"... If you see rings, try to remove the inner ring with a screwdriver. On my car it was a peg that spread out the outer ring causing it to grasp the frame and hold tight. Just forcing it - as shown - breaks the plastic stays. Pulling out the center post first, should cause the outer ring to contract so you can wiggle it out. MRW
Thank You my Friend. :-)
I need to remove the entire light housing to clean the lens, it's foggy and doesn't look good. Do you know how to remove it!? BTW thanks a lot for the video!!
Guess not
Ai että rallienglantia tää on kova
Good comment and Let's All folk discuss more 👍😀
I can't get my fasteners out did you just pull them out or use a tool
Thanks for info 👍😀
I have a 2001 toyota and the license plate bulbs are under the license plate ,nothing to do with opening the hood
Ok
Thanks
Terrible!
Don't tear them out, they can easily be removed without tearing!!!
Tearing breaks them!
Hi, Thanks. Do you have video on remove. :-)
th-cam.com/video/Yy44c40OlpY/w-d-xo.html
Basically, just use a screwdriver or nails on the inner circle, pull that circle out, and then the clips can be removed easily.
Thanks ! :-)
talking too. much … i have. to speed the video
Noted. Thank You 👍
6 minutes in and you still didn't get to the point, also you're missing thr emergency trunk release lever, which is the real hard part of this operation.
Thank You for comment. 👍😀
@@PeterFinnTheCarDoctor You're not welcome.
You talking to much 🤐🤐🤐🤐
It can never be easy for as done on videos. Ofc my model has a handle in the back of the trunk , blocking me from taking it down to replace the light
Many Thanks.
police make you come to this page with all the tickets
No way ! :-)
They hold gun to you head like me also
I didn't get a ticket but it's exactly why I'm here! Lol.
20 minute video when others have 2 minute videos on the same thing? Thanks, but no thanks, too long
Noted
Didnt understand . Are you making a movie or writting a book?
Noted
Your method doesn't apply to the 2012 Camry.
Different body style, different design...
Thanks Sir :-)
Order from India the bulbs cheaper
thats not how u do the 2012
Too long
Thanks for comment. :-)
Count Dracula
Hello 😃, I have read your comment and I appreciate it. Thanks. 👍
I needed to learn how to change the bulb but your English made me loose my interest
Thanks for info Sir. :-)
E SO don’t be a jerk. He enunciates more than the average American
His English is fine, it's his "accent" that you' may have difficulty with - You need to learn the difference
Stfu
Just because his accent is different, that doesn't make it wrong. Maybe your accent is a turn-off to others. You can't complain that you left without the knowledge, just that you left.
You spent eight minutes and explaining something it takes 2 minutes to do why don't you just go straight to it and study explaining everything and when your next video I was going to sleep after 2 minutes
Thanks 👍😀
Take a English speaking course then make video , Took whole day to come to point ,
Thanks
No English, please.
Thanks for comment. 👍
What
Jesus christ, get to the point please
👍
Holly shit , talk too much men ! Spent too much times . It's simply.
👍😀
Thank you
Welcome!