Thank you for the update! I was curious about the Tone Capture Pedal from 2019 NAMM show, when will it be released? Can we have any details about the pedal sampling rate? Feature? Thank you.
Will the ge200 accept ge300 tone captures? I would really like to see a community of people sharing effect and amp files... there is a lot of potential in this technology even for people who Just want to try new tones... i would really dig having some supro amp models personally... or even just digitize my whole rig the best i can... the possibilities are endless
Whenever I change to a different preset, it does not follow the exp pedal level, but it just goes to max volume(preset level).. Will there be an update to solve that?
Crap!!! All my stored settings disappeared after the update!! There was no way to backup as the GE200 SW couldn't connect to the device before updating...
Do the old amps and effects already on the pedalboard with the previous firmware remain the same? Will next updates increase the number of them, together with the option to load more Ir at a higher sampling rate? And all without having cpu overload troubles while playing? Thanks.
Please, make some usable octaver. Poly, and new mono pitch shifter isn't good at "-12.0" set. GE200 is great, but even old cheap Boss ME-25 have much better octaver. Something like your Tender or Pure Octaver would be great.
@@jesus4pincho No. Me-25 amps sounds plastic, but octaver and others modulations are great. Really recommend if you need effects for your amp, or just for ambients.
Thanks for the update. I have noticed that when I click the tap tempo to configure my delay, the sound stutters every time I click on it. Has this been fixed? If not, do you plan on fixing it?
@@paulspringett7600 Thank you for your answer. But no version 2. I refresh with F5 and also with Ctrl+F5 to clear the cash… Strange. I receive an email from Mooer announcing the update with a link to download. When I click, I have an error 404 and a page in chinese. Then I am directed to Mooer site. But no trace of the new version in thedownload section.
When I close the studio, and open it again, NO DEVICE DETECTED appears! i need to restart the windows 10 computer always to open it again! TO using the 2.0.3 firmware! help me
Hi there, sorry for the inconvenience it might have occurred. Please kindly contact MOOER support team for the issue with the product. support@mooeraudio.com
If I have not even updated to 1.2.3 yet do I have to update to it in addition to the latest 2.0 Or does 2.0 alone already include the updates of 1.2.3? Please help me.
@@victorlaw4256 www.mooeraudio.com/companyfile/GE200-Downloads-138.html For WINDOWS PC users, your "Studio for GE200" software must be V1.2.0 or higher.
@@GabrielSmith0 Thanks. I use windows 10. I go ahead to update to 1.2 and ignore the newer updates of 2.0? Sorry that I go round and round and seem to be asking the same question. I really hope the developer reads and answers the queries here in the comments if they bothered in the first place to upload a video.
I updated to 2.0.0 version but I have a problem because using the headphone outpout it has a delay, I mean I play an hear the sound with lag. I tried using diferent cables but the problem continues. Ussing the left output have no problems.
Hi! I followed the upgrade procedure. But the pedal remains locked on the reboot. Contacted the technical service, but I have not received a reply. How can I do? Thanks
I am afraid I wont update the pedal since there seem to be various unsolved problems with the updating procedure. I dont want to waste a pedal I just bought. My old Digitech RP360 XP seems was better. It even has harmony effects and octaver. I might cascade the two so I can use both worlds.
On my device shows this message "equipment version is too low please update firmware" it appeared when I tried update it. I had to go back to an old version to work, it's in version 1.2.3. Do you know how to fix it? Thanks
do you have the same icon showed in the video?? I had troubles trying to update it but the problem was that I didn't have the correct version of the program.
Question for mooer users here : Does anyone know if this unit (Mooer GE200) is recognised as a MIDI compatible device and can be use as a MIDI (over USB) controller with a Digital Audio Workstation ? Can I use the footswitch toggles to activate deactivate tracks effect in a DaW and use the Exp pedal to create parameters swell in my DaW ? Or does the USB is only to access the parameters trough the Mooer UI. Thank you for your replies.
You can use the footswitch to control the mooer parameters, but not the computer software parameters. It's a great multi-effect but not good for ambient guitar, you can do swells with the exp.pedal, but I regret not buying the zoom g5, it's better for ambient guitar.
do i need to download some other software to use my mooer as an audio interface? my mooer isnt being read on my recording software, but its being read well with the mooer software.
I have trouble updating my GE 200 to version 2.0 Everything seemed to work, but it gets stuck with the boot screen. What i did: Put the machine in update mode, plug in the usb, start the software. It went to 100% and i click done. It did not reboot by itself. After unplugging power and reconnecting i get the bootscreen, but it does not start. Tried 3 computers using win7 and win 10. Does anyone have an idea how to solve this?
It's very nice of you Mooer to describe the new firmware in detail here. Thank you.
Modeling technology is not an easy thing to master......
Mooer is doing a very good Job.
I can finally tune precisely to the frequency of the gods 432 HZ. Thank you Mooer, very cool!
Please add octave and harmony effects
all you need to do is go to your pitch shifter, and lower the mix of the pitch shift effect :)
well done mooer! cant wait to check the new features
Thanks for the update on this.
I would like to ask if this type of update of having “Trails” was also done for Mooer GE 150?
Thank you for the work. Can you add a Linux compatible version of this software?
Thanks for the help. Worked perfectly!
GOD Bless You 🎸🎸🎸
Thank you for the update! I was curious about the Tone Capture Pedal from 2019 NAMM show, when will it be released? Can we have any details about the pedal sampling rate? Feature? Thank you.
Cool!!! Thanks for the update!!!!
Add a shimmer reverb.
This^
Please add one
Want those Ichika tones
Yes!! Something a bit more lush..!!
Please show how to connect and set up, with video and screen shots.
Will the ge200 accept ge300 tone captures? I would really like to see a community of people sharing effect and amp files... there is a lot of potential in this technology even for people who Just want to try new tones... i would really dig having some supro amp models personally... or even just digitize my whole rig the best i can... the possibilities are endless
Olá, após Update para Versão V2.0.3, minha pedaleira desligou os leds dos botões, tem alguma configuração pra ligar os leds
What about the changed amps and effects? Why don't you tell us what you have changed?
Whenever I change to a different preset, it does not follow the exp pedal level, but it just goes to max volume(preset level).. Will there be an update to solve that?
After update, Moeer GE 200 isn´t saving IR anymore. Anyone in trouble with this?
Crap!!! All my stored settings disappeared after the update!! There was no way to backup as the GE200 SW couldn't connect to the device before updating...
hi, did you find any solution for that problem???
Do the old amps and effects already on the pedalboard with the previous firmware remain the same? Will next updates increase the number of them, together with the option to load more Ir at a higher sampling rate? And all without having cpu overload troubles while playing? Thanks.
Please, make some usable octaver. Poly, and new mono pitch shifter isn't good at "-12.0" set.
GE200 is great, but even old cheap Boss ME-25 have much better octaver. Something like your Tender or Pure Octaver would be great.
Do you find the me-25 amp models better than this??
@@jesus4pincho No. Me-25 amps sounds plastic, but octaver and others modulations are great. Really recommend if you need effects for your amp, or just for ambients.
Thanks for the update. I have noticed that when I click the tap tempo to configure my delay, the sound stutters every time I click on it. Has this been fixed? If not, do you plan on fixing it?
does mooer ge200 have TRAIL settings?
When is this being released as only finding the earlier version?
Okay Mooer have now released V.2 on their website....thank you!
Just go to Mooer audio com page and look for Downloads for GE200
@@paulspringett7600 Version 2.0 is not on the English part of the site. The last one is 1.2.3. Do you have a link ?
Just refresh the page... it's there under downloads
@@paulspringett7600 Thank you for your answer. But no version 2. I refresh with F5 and also with Ctrl+F5 to clear the cash… Strange. I receive an email from Mooer announcing the update with a link to download. When I click, I have an error 404 and a page in chinese. Then I am directed to Mooer site. But no trace of the new version in thedownload section.
When I close the studio, and open it again, NO DEVICE DETECTED appears! i need to restart the windows 10 computer always to open it again! TO using the 2.0.3 firmware! help me
Has any Ge200 user noticed that the delay trails do not work?? please fix this Mooer.
I have updated version 2.0, now amps and cabs do not work, it remains mute when I activate them
Hi there, sorry for the inconvenience it might have occurred. Please kindly contact MOOER support team for the issue with the product. support@mooeraudio.com
hey Cristian. Did you solve this problem? I was going through the same
Would you mind helping me out?
Does anyone know how to disable the looper function? Sometimes I trigger it live by mistake while changing presets.
mine will not update when I press the button on the far left, it does nothing.
If I have not even updated to 1.2.3 yet
do I have to update to it in addition to the latest 2.0
Or does 2.0 alone already include the updates of 1.2.3?
Please help me.
Had the exact same question. Anyone??
@@zeropointperspective9643 As long as you have v1.2 and your using Windows you should be good. Just be sure to back up your presets!
@@GabrielSmith0 Thanks. I am saying I don't have 1.2
Do I just update to 2.0 only and I won't miss anything?
@@victorlaw4256 www.mooeraudio.com/companyfile/GE200-Downloads-138.html For WINDOWS PC users, your "Studio for GE200" software must be V1.2.0 or higher.
@@GabrielSmith0 Thanks. I use windows 10.
I go ahead to update to 1.2 and ignore the newer updates of 2.0?
Sorry that I go round and round and seem to be asking the same question.
I really hope the developer reads and answers the queries here in the comments if they bothered in the first place to upload a video.
I updated to 2.0.0 version but I have a problem because using the headphone outpout it has a delay, I mean I play an hear the sound with lag. I tried using diferent cables but the problem continues. Ussing the left output have no problems.
Is it possible to go direct to the PA with this pedal?
yes, thats where it shines most
Just bought one and it is not recognised by my PC (Windows 10) and it does not switch on when usb is plugged in.
Hi there, please contact our support team for solving the issue. support@mooeraudio.com Thank you.
i have v1.2.3b but everytime i TRY to import patch it shuts down the softwear editor and have to click on it to bring it back but doesnt work.
Hi!
I followed the upgrade procedure. But the pedal remains locked on the reboot. Contacted the technical service, but I have not received a reply. How can I do? Thanks
I am afraid I wont update the pedal since there seem to be various unsolved problems with the updating procedure.
I dont want to waste a pedal I just bought. My old Digitech RP360 XP seems was better. It even has harmony effects and octaver. I might cascade the two so I can use both worlds.
Need a hermonize mod and control button fix
On my device shows this message "equipment version is too low please update firmware" it appeared when I tried update it. I had to go back to an old version to work, it's in version 1.2.3. Do you know how to fix it? Thanks
Hii all, Can somebody help me?. I've done exactly as described but my fireware is still version 1.2 . Please help! :(
I lost all my presets too, fuck!
firmware*
do you have the same icon showed in the video?? I had troubles trying to update it but the problem was that I didn't have the correct version of the program.
I just wish I wouldn't have done this update... you're lucky, man! :(
Question for mooer users here : Does anyone know if this unit (Mooer GE200) is recognised as a MIDI compatible device and can be use as a MIDI (over USB) controller with a Digital Audio Workstation ? Can I use the footswitch toggles to activate deactivate tracks effect in a DaW and use the Exp pedal to create parameters swell in my DaW ? Or does the USB is only to access the parameters trough the Mooer UI. Thank you for your replies.
You can use as a usb unit for a software as guitar rig or amptube etc...
Hi@@delma1217 thanks for the answer so "only" as a Audio Interface and not as a controller :(
You can use the footswitch to control the mooer parameters, but not the computer software parameters. It's a great multi-effect but not good for ambient guitar, you can do swells with the exp.pedal, but I regret not buying the zoom g5, it's better for ambient guitar.
@@luapmartin yes.
do i need to download some other software to use my mooer as an audio interface? my mooer isnt being read on my recording software, but its being read well with the mooer software.
Do not you guys review the GE 100??? Are you guys even making the GE 100????
I updated and lost my IR's Only saw the warning later. Can I reverse back to previous version or are they lost forever?
noticed it does that, so now i backup my stuff each before i update
Presiden Xi produced a good company this time.... salutations.
please write the link to do the download. thank's
What about ge300
I have trouble updating my GE 200 to version 2.0
Everything seemed to work, but it gets stuck with the boot screen. What i did: Put the machine in update mode, plug in the usb, start the software.
It went to 100% and i click done. It did not reboot by itself. After unplugging power and reconnecting i get the bootscreen, but it does not start.
Tried 3 computers using win7 and win 10. Does anyone have an idea how to solve this?
Do you resolve it? I have same problem. 2.0.0 to 2.0.3 dont quit from boot screen on pedal
Please I need help how to turn off the device
Why mt version is not updating?...it is still version 1.2
www.mooeraudio.com/companyfile/138.html you have to download version 2 install it on your computer and then update the ge200
what happens if I update? will I loose my presets?
Yep
I know it's already been 7 months but do try reading the descriptions of every videos you watch first before asking questions like these. Thanks
How can I use the editor after updated to 2.0? the app said that my version is too low.
You need to install the latest version of the Mooer studio to use your updated Mooer. called *Mooer Studio For GE200*
How to get the software? Help plz
Thanks for the Update, but the update delete all my presets :(
if you have please send me. Mooer ge 200 update firmware 2.0 or 2.0.3
how do i check to see what version i have?
shows when you switch it on, and on your mooer computer software
MOOER GE200 Firmware Update v2.0.3 problem
problem. 2.0.0 to 2.0.3GE200
с o m m m oooo n . . . !!!