Dang Jonathan, you had me thinking that you were going to mold new parts because the correct ones were unavailable. Fooled a silly old man ya did! O.K. not clickbait but a great how to video showing how it could have been done correctly the first time. Great stuff you be doing here, two thumbs up of course.
Great fixes Jonathan!! These are common issues with the Scorpion and Super Scorpion. There is a LOT of internal air pressure on the air-frames due to large inlets for the turbine and open gear areas. I have had the standard size Scorpion for several seasons now and have done many mods to prevent the canopy from departing the frame!! The standard Scorpion canopy is more flimsy than the Super Scorpion, so it actually bends in half from the internal pressures. I have layered some carbon and glass cloth front to back to stiffen the canopy. I have also added magnets along the canopy/frame joint to help. Sometimes surgical tape is your best friend too!! As for decreasing the pressure, a friend made some inlet duct restricters on his Super Scorpion that worked nicely. I added some NACA ducts in the rear of mine (Ultra Flash style) and they seem to help let the air exit as well. If you have never flown a Scorpion, you must try one sometime. Nothing that I have ever flown flies like a Scorpion!!
Thanks Brent. Yeah I didn’t comment in the video and I kind of noticed it afterwards that the intakes on this plane are absolutely massive especially when you compare it to something like the diamond. Yeah I have never flown one but I would like the opportunity. I was talking with the owner today. kind of a unique plane, a combination of a sport jet and a scale jet a little bit of an F-18 with the twin verticals in a little bit like an F 15 with the airbrake
Quick fix on the Aviation Design Super Scorpion hatches. Both have been lost during flight. Fortunately it didn't alter the handling of the aircraft that much and the owner was able to get it down safely. Thanks for watching!
Thanks for the video. I am rebuilding a Super Scorpion after a crash and I wonder if you could make a review of your Super Scorpion build and equipment instaled on it. It would be very useful. Thanks a lot!!!
Geez, what a poor design on those front pins. I like the new ones you made.. those are not coming out! A fellow pilot has the smaller one, so I will get him to check his pin setup.
That one isn't mine. I was fixing it for someone. I did just build an Aviation Design Diamond. Here is a link to Aviation Design Website. The one in the video was the Super Scorpion. www.aviation-design.fr/?rc-jet-models
Support our creative efforts here: Patreon Account: www.patreon.com/thelightersideofrc
Dang Jonathan, you had me thinking that you were going to mold new parts because the correct ones were unavailable. Fooled a silly old man ya did! O.K. not clickbait but a great how to video showing how it could have been done correctly the first time. Great stuff you be doing here, two thumbs up of course.
Thanks for watching all the videos! It seems like it's a common problem with this Super Scorpion.
Present for watching
🙌😎
Nice timing.
First!🙌💵
Good timing, I have to replace 2 broken latches on my Ultraflash canopy.
Hope you were paying attention! If not,just watch it over and over😉.
Great fixes Jonathan!!
These are common issues with the Scorpion and Super Scorpion. There is a LOT of internal air pressure on the air-frames due to large inlets for the turbine and open gear areas.
I have had the standard size Scorpion for several seasons now and have done many mods to prevent the canopy from departing the frame!! The standard Scorpion canopy is more flimsy than the Super Scorpion, so it actually bends in half from the internal pressures. I have layered some carbon and glass cloth front to back to stiffen the canopy. I have also added magnets along the canopy/frame joint to help. Sometimes surgical tape is your best friend too!!
As for decreasing the pressure, a friend made some inlet duct restricters on his Super Scorpion that worked nicely. I added some NACA ducts in the rear of mine (Ultra Flash style) and they seem to help let the air exit as well.
If you have never flown a Scorpion, you must try one sometime. Nothing that I have ever flown flies like a Scorpion!!
Thanks Brent. Yeah I didn’t comment in the video and I kind of noticed it afterwards that the intakes on this plane are absolutely massive especially when you compare it to something like the diamond. Yeah I have never flown one but I would like the opportunity. I was talking with the owner today. kind of a unique plane, a combination of a sport jet and a scale jet a little bit of an F-18 with the twin verticals in a little bit like an F 15 with the airbrake
Quick fix on the Aviation Design Super Scorpion hatches. Both have been lost during flight. Fortunately it didn't alter the handling of the aircraft that much and the owner was able to get it down safely. Thanks for watching!
As usual, very informative
Thanks Jeff
Awesome video, liked and subscribed 👍🏽
Nice! Thanks for watching!
so much better than the pins
Thanks 😊 yea should work much better!
Love these build/repair videos while we can’t fly during lockdown. Like the look of the AD Scorpion, was wondering how they fly Jonathan?
Thanks for watching 😊. I’ve never had the opportunity to fly one but as mentioned by quite a few people they are a very unique plane and fly well.
Helpful!
awesome!
Thanks for the video.
I am rebuilding a Super Scorpion after a crash and I wonder if you could make a review of your Super Scorpion build and equipment instaled on it. It would be very useful.
Thanks a lot!!!
Hello Angel. This Super Scorpion was just me fixing the canopy. unfortunately I did not build the aircraft. Good luck with your repairs!
@@thelightersideofrc Thanks a lot Jonathan.
I love your videos!!!
Congrats for your Channel, very ilustrative and full of good advice.
Thank you 😊
When you have a moment, check out our site! www.thelightersideofrc.com/shop
next you know own going to have make landing gear doors
Yea that would be a good addition to the scorpion based on the design
Geez, what a poor design on those front pins. I like the new ones you made.. those are not coming out! A fellow pilot has the smaller one, so I will get him to check his pin setup.
Good call. See Brent’s comment if you haven’t.
Do you fly that model? I can’t find it?
That one isn't mine. I was fixing it for someone. I did just build an Aviation Design Diamond. Here is a link to Aviation Design Website. The one in the video was the Super Scorpion. www.aviation-design.fr/?rc-jet-models
@@thelightersideofrc I just found your channel.
Is there a flight video fro the one you built around a month ago?
The jet with the custom cone lights?