You should be an instructor of some sort. Directions were very clear and easy to understand. I'm going to do mines tomorrow, wish me luck and Happy New Years 2025!
I just took the sensor off without taking everything else apart and cleaned it with the Mass air sensor spray. It ran 100% better and the check engine light turned off. Mechanics will rip you off if your not doing your home work!!
@@51OAKLANDER510 pop hood. Remove MAF sensor (none of this videos steps are needed) instal new MAF sensor. She'll run like new. Took me 3 months and 17 bucks to figure that out lol
Hi I have the same car but it is an automatic and I didn't have to undo all you did I unclipped the electrical clips then undid two large hose clips that hold the sensor and then pushed back the tubes on each side and removed it I may have a different engine series as the M A S, doesn't have the 4 bolts like the one in your video but after a air filter and a few squirts of the cleaner it really does make a difference in power and economy my engine is a series 3 v6 but it's a great car. All the best from New Zealand.
@Mr602 yes I did most of mine and your engine looked very much the same but the tube with the M A Sensor was 4inch long (aprox) of a hard plastic with a small square on top both ends held in place with s/steel hose clips.
I had to remove this to change my negative terminal. Upon removal i seen That silicone seal/boot at the end of the MAF has ripped. I have done extensive research and cannot seem to find that piece itself anywhere. Any tips or info would be helpful.
What was the very first part that you took off called? I’m having issues where mine keeps coming a loose, and I wanted to try to fix it so it stayed in its place, but I don’t know what that piece is actually called to find out how 😭
Did you not take the engine clean serios.been never less of problem then and dont forget when then can start fire...☝ Its not need a airmasecleaner to that jobb, enogh with electronic cleaner..
Hi I have the same car but it is an automatic and I didn't have to undo all you did I unclipped the electrical clips then undid two large hose clips that hold the sensor and then pushed back the tubes on each side and removed it I may have a different engine series as the M A S, doesn't have the 4 bolts like the one in your video but after a air filter and a few squirts of the cleaner it really does make a difference in power and economy my engine is a series 3 v6 but it's a great car. All the best from New Zealand.
I've been and double checked out the M,A,S and I am slightly wrong in my description I removed it with it still bolted to the air cleaner clip on/off cover. Sorry for any confusion! my bad.
You should be an instructor of some sort. Directions were very clear and easy to understand. I'm going to do mines tomorrow, wish me luck and Happy New Years 2025!
I just took the sensor off without taking everything else apart and cleaned it with the Mass air sensor spray. It ran 100% better and the check engine light turned off. Mechanics will rip you off if your not doing your home work!!
Hey my 99 maxima is throwing the MAF sensor code, you think I should I try Cleaning it before buying a new one ?
@@sukh.088hey man i have a 2000 did you fix it I have a problem with mine the MAF sensor
That was VERY helpful! Thank you for taking the time to make and share the video. Cheers!
What do I do after putting everything back together. Is there some reprogramming process due to disconnecting/reconnecting the battery?
Thats why I haven't done mine.
@@51OAKLANDER510 pop hood. Remove MAF sensor (none of this videos steps are needed) instal new MAF sensor. She'll run like new. Took me 3 months and 17 bucks to figure that out lol
@@thewavybaby7951 what kind go sensor you recommend bro
Will this keep engine from stalling while driving or at idle
Supposedly it will IF a dirty sensor was the cause for all that.
Do you think this is why my service soon light is on?
Yes
Hi I have the same car but it is an automatic and I didn't have to undo all you did I unclipped the electrical clips then undid two large hose clips that hold the sensor and then pushed back the tubes on each side and removed it I may have a different engine series as the M A S, doesn't have the 4 bolts like the one in your video but after a air filter and a few squirts of the cleaner it really does make a difference in power and economy my engine is a series 3 v6 but it's a great car. All the best from New Zealand.
@Mr602 yes I did most of mine and your engine looked very much the same but the tube with the M A Sensor was 4inch long (aprox) of a hard plastic with a small square on top both ends held in place with s/steel hose clips.
You don't have to remove the battery. You just have to remove the metal brackets on top of it.
I had to remove this to change my negative terminal. Upon removal i seen That silicone seal/boot at the end of the MAF has ripped. I have done extensive research and cannot seem to find that piece itself anywhere. Any tips or info would be helpful.
thanks again..we have the same car and u showing me sone pointers..my mass flow is the cause of my engine light along with the bank 1 sensor 1 O2..
skyweezynU hope you're getting everything cleaned out and replaced, the o2 Sensor was tough but possible to do by yourself. Good luck
What was the very first part that you took off called? I’m having issues where mine keeps coming a loose, and I wanted to try to fix it so it stayed in its place, but I don’t know what that piece is actually called to find out how 😭
Was your car idling up and down before you cleaned it
Did you not take the engine clean serios.been never less of problem then and dont forget when then can start fire...☝
Its not need a airmasecleaner to that jobb, enogh with electronic cleaner..
Here because of po171 code for 01 Infiniti i30T anybody else have same problems ?
Po138 but I'm sure same family mine runs fine but idles superrrr low thank God without stalling
What did you end up figuring out
Hi I have the same car but it is an automatic and I didn't have to undo all you did I unclipped the electrical clips then undid two large hose clips that hold the sensor and then pushed back the tubes on each side and removed it I may have a different engine series as the M A S, doesn't have the 4 bolts like the one in your video but after a air filter and a few squirts of the cleaner it really does make a difference in power and economy my engine is a series 3 v6 but it's a great car. All the best from New Zealand.
I've been and double checked out the M,A,S and I am slightly wrong in my description I removed it with it still bolted to the air cleaner clip on/off cover. Sorry for any confusion! my bad.