Hi amigo , would it be possibly wise to grind off the extra sticking out thread portion ,I’m thinking worst case of an accident it’s a potential safety hazard? Amping ,
Yes, I will. I mentioned that in the video. I am just observing if this is a good long term solution or if I need to look into other option like to weld this permanently. So far, all is good and I have not encountered any issue with this easy fix. I will be cutting this very soon... Thank u for the concern. I greatly appreciate it.
@@Easyebike Very welcome, I bought a similar windshield but with a slightly higher profile , mine came without any rubber washers so I made some out of a scrap rubber piece ,and ordered some in the meantime , I’m thinking of putting rubber washers too under the mirror bracket , There’s not much vibration anyway but the bracket looks a bit weak , I might have it reinforced as well . I will see how it goes too.
@@ManchesterStrong Hmmm.. I'm quite interested with your windshield. Maybe later I would change mine too. Yes, please keep it strong and rigid to avoid vibration. Keep it as close to the mirror stand as possible so it will not be vibrating much and would be much sturdy. The longer that holder is, the stronger the vibration which will damage the joint between the handle bar and the part where you connect the mirror. Some have reported issues where they would have to weld that part again.
Question po, okay lang po ba maglagay ng mods and mga diy if ever na installment 'yung unit? Salamat po sa sagot, more videos pa po. Ride safe and God bless.
Depende sa mods nyo po. Kung katulad lng naman ng mostly na ginagawa ko ok lng po. (Kagaya ng windshield o visor.. etc).. Pero kng mods kunyare magdagdag ka ng mga ilaw at lalo na pag malalakas na ilaw na pwedeng maka apekto sa battery baka hindi. Kung tutuusin pwede pa din namang gawin kahit naka installment kasi sayo na yan eh, pero kasi baka mawala ang warranty sa battery kasi syempre nagdagdag ka ng load para dun. Kahit anong mod pwede kasi sayo na yan pero baka mawala lang ang warranty ng ibang parts lalo na pag apektado ng mod mo. Hope this helps
Hindi ko pa po nasubukan gawin yan. Pero parang sayang yata kung hub yung iupgrade mo at yung controller is mas mababa kumpara sa hub. Mostly dyan kasi yung controller ang inuupgrade.
Ito po shopee.ph/Top-box-luggage-box-Motorcycle-trunk-general-storage-box-motorcycle-storage-boxwaterproof-large-capacity-tool-box-motorcycle-tail-box-i.858013521.23537418870
ito po yung sa monorack. Ibang store po ito kasi yung pinagkunan ko wala na.. pa check na lng sa ibang store shopee.ph/DC-MONORACK-TOP-BOX-BRACKET-FOR-VESPA-i.1027509634.21283282378?sp_atk=45e07480-9881-413a-b1b7-a8d5fb65cd45&xptdk=45e07480-9881-413a-b1b7-a8d5fb65cd45
astig may blooppers pa sa dulo haha
hahaha..madaliang vlog eh..hehehe
mukang ako ung nag pa welding boss myk ahh 🤣
kuha mo ba? hahaha..
Hi amigo , would it be possibly wise to grind off the extra sticking out thread portion ,I’m thinking worst case of an accident it’s a potential safety hazard? Amping ,
Yes, I will. I mentioned that in the video. I am just observing if this is a good long term solution or if I need to look into other option like to weld this permanently. So far, all is good and I have not encountered any issue with this easy fix. I will be cutting this very soon... Thank u for the concern. I greatly appreciate it.
@@Easyebike Very welcome, I bought a similar windshield but with a slightly higher profile , mine came without any rubber washers so I made some out of a scrap rubber piece ,and ordered some in the meantime , I’m thinking of putting rubber washers too under the mirror bracket , There’s not much vibration anyway but the bracket looks a bit weak , I might have it reinforced as well . I will see how it goes too.
@@ManchesterStrong Hmmm.. I'm quite interested with your windshield. Maybe later I would change mine too. Yes, please keep it strong and rigid to avoid vibration. Keep it as close to the mirror stand as possible so it will not be vibrating much and would be much sturdy. The longer that holder is, the stronger the vibration which will damage the joint between the handle bar and the part where you connect the mirror. Some have reported issues where they would have to weld that part again.
Question po, okay lang po ba maglagay ng mods and mga diy if ever na installment 'yung unit? Salamat po sa sagot, more videos pa po. Ride safe and God bless.
Depende sa mods nyo po. Kung katulad lng naman ng mostly na ginagawa ko ok lng po. (Kagaya ng windshield o visor.. etc).. Pero kng mods kunyare magdagdag ka ng mga ilaw at lalo na pag malalakas na ilaw na pwedeng maka apekto sa battery baka hindi. Kung tutuusin pwede pa din namang gawin kahit naka installment kasi sayo na yan eh, pero kasi baka mawala ang warranty sa battery kasi syempre nagdagdag ka ng load para dun. Kahit anong mod pwede kasi sayo na yan pero baka mawala lang ang warranty ng ibang parts lalo na pag apektado ng mod mo. Hope this helps
Yes, marami pa akong gagawing videos. Medyo mabagal lng kasi tuwing rest day lang ako nakakagawa ng video..
Yung extension bolt sidemirror sir clockwise ba left ang right.
not sure kng naiintindihan ko ang tanong. pero clockwise po ang pahigpit. Parang regular lang na mga bolt
@@Easyebike cge po thank you po.yung paghigpit po clockwise.meron po Kasi counter Yung paghigpit na di tugma sa wsp ko po
Tfs🙏boss👍tca po💚
Maraming salamat sa laging pag subaybay sir! Take care as well
Boss pede ba palitan ng 2k watts ang hub na wsp kaya ba ng controller
Hindi ko pa po nasubukan gawin yan. Pero parang sayang yata kung hub yung iupgrade mo at yung controller is mas mababa kumpara sa hub. Mostly dyan kasi yung controller ang inuupgrade.
Saan po kayo umorder nan and pede po bang mahingi link if shopi or lazada sya ty po!!
Dito ko po na order ang windshield. Pang Yamaha Fazzio po sya. shope.ee/601bU6RbC7
sir pwede po matanong kung ano yung topbox niyo tsaka po yung lagayan niya?
Ito po shopee.ph/Top-box-luggage-box-Motorcycle-trunk-general-storage-box-motorcycle-storage-boxwaterproof-large-capacity-tool-box-motorcycle-tail-box-i.858013521.23537418870
ito po yung sa monorack. Ibang store po ito kasi yung pinagkunan ko wala na.. pa check na lng sa ibang store shopee.ph/DC-MONORACK-TOP-BOX-BRACKET-FOR-VESPA-i.1027509634.21283282378?sp_atk=45e07480-9881-413a-b1b7-a8d5fb65cd45&xptdk=45e07480-9881-413a-b1b7-a8d5fb65cd45
ito pala video paano ma install yan th-cam.com/video/xXZzqfECkQA/w-d-xo.html
Pabulong naman po saan nabili yung visor po at wind shield
no worries.. ito po shope.ee/6fGYAcoIRX
ito sa windshield shope.ee/1LF1ot2aIt
Link po ng windshield sir, tnx
ito po sir shope.ee/6zswlhV9V4