I have a 2014 300c . I’m upgrading my front bumper to a 2019. My car has a adaptive cruise control but on my 2014 it’s located on the right hand side.My new bumper it’s located in the middle. After much research and frustration I found the new metal bracket without the sensor.My problem now is that I need the plastic clips for the forward side of the bracket the local Chrysler dealers said I couldn’t just buy the plastic clips
I know this is fairly old, but if you see this, I have.a 2015 and for the life of me cannot find a wiring diagram to match an aftermarket harness. The harness and sensor was damaged on mine, and I lost the original harness to match the wiring.
I'm dealing with this currently on a 2012. Does the replacement sensor need to be oem or can it be used from the same generation and be flashed to a new vin?
I do not know the answer to that, I am not sure that the process I had to do was flashing the vin, it may have been but they way it was described to me was making sure the vehicle network recognized the module, kind of like trusting a new IP address
Hello! Would you be able to tell me what the black caps you show at 19:30 are called or where you were able to find yours? I'm struggling to find them.
Sorry it took a while, I have been traveling. I bought them at the local Dodge place but here is what I got: moparparts.delandcjdr.com/p/Dodge__Durango/CLIP--RETAINER-Adaptive-Cruise-Control--Push-Lock/61621548/68186439AA.html?partner=googlebase_adwords&kwd=&origin=pla&partnerDevice=c&userLocation=9011819&gclid=Cj0KCQiAv6yCBhCLARIsABqJTjZq1UAhSotDLfoOapKZ_XHlmVnMxQi8YDt1yW5DL_jIsvipZUfcjT8aAqiEEALw_wcB
Yes, you just turn the ACC off with the button on the steering wheel and then push the cruise control button on which is above it. Then set it as normal. Unless something else is damaged other than the sensor it should work.
Did her durango quit running when the camera broke? Computer says one of the two ACC cams is out.
I have a 2014 300c . I’m upgrading my front bumper to a 2019. My car has a adaptive cruise control but on my 2014 it’s located on the right hand side.My new bumper it’s located in the middle. After much research and frustration I found the new metal bracket without the sensor.My problem now is that I need the plastic clips for the forward side of the bracket the local Chrysler dealers said I couldn’t just buy the plastic clips
Did you try some of the online mopar parts dealers? Get the part number from the local dealer and see if you can find it online.
Good job you have the patience of Job
Thanks for the nice comment
I know this is fairly old, but if you see this, I have.a 2015 and for the life of me cannot find a wiring diagram to match an aftermarket harness. The harness and sensor was damaged on mine, and I lost the original harness to match the wiring.
I do not have any insight to the wiring as I did not have to mess with it, I bought the factory sensor
I'm dealing with this currently on a 2012. Does the replacement sensor need to be oem or can it be used from the same generation and be flashed to a new vin?
I do not know the answer to that, I am not sure that the process I had to do was flashing the vin, it may have been but they way it was described to me was making sure the vehicle network recognized the module, kind of like trusting a new IP address
I have this problem with my dodge charger will this problem cause the cruise control steering wheel buttons not to operate?
So when the sensor was damaged normal cruise control still worked, not sure you have the same problem.
Hello! Would you be able to tell me what the black caps you show at 19:30 are called or where you were able to find yours? I'm struggling to find them.
Sorry it took a while, I have been traveling. I bought them at the local Dodge place but here is what I got:
moparparts.delandcjdr.com/p/Dodge__Durango/CLIP--RETAINER-Adaptive-Cruise-Control--Push-Lock/61621548/68186439AA.html?partner=googlebase_adwords&kwd=&origin=pla&partnerDevice=c&userLocation=9011819&gclid=Cj0KCQiAv6yCBhCLARIsABqJTjZq1UAhSotDLfoOapKZ_XHlmVnMxQi8YDt1yW5DL_jIsvipZUfcjT8aAqiEEALw_wcB
When you install a new one you got to program or is just plug and play
Have to go to the dealer and have it programmed cost about $75
Did you take it to a Dodge dealership for that price?
Was that an aftermarket or OEM unit that was installed?
It was an OEM unit
Can you write the website of where you bought it please?
I assume you are talking about the sensor. I bought it from MoparParts Giant.com Part number 68259548AA
Funny how u are trying to level it on the lift even though ur Durango is not level on the lift lol
I was using a torpedo level to plum it up and not sure that the durango is not level, What gave you that impression?
Is it possible to just disable the acc and run regular cruise if the sensor stops working? And if so how?
Yes, you just turn the ACC off with the button on the steering wheel and then push the cruise control button on which is above it. Then set it as normal. Unless something else is damaged other than the sensor it should work.