Onyx RCR 1.5 MOD // Turn Signals Install : Fork Mount Style
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Need new flashers or turn signals on your Onyx motorbike? Quick and easy install or upgrade to get a new set of chasing light blinkers. Links to everything needed for this install below.
Amazon Affiliate Links below
Dual Color Turn Signals :: amzn.to/3MdURAd
22-16awg Guage Bullet connectors :: amzn.to/3FKYr2D
Wire Strippers/Crimps :: amzn.to/3Lr9G1r
Shrink wrap tubing :: amzn.to/3lgGj76
Zip Ties :: amzn.to/37T4S7a
Electrical tape :: amzn.to/3MeNecV
Camera Links
GoPro Hero 9 amzn.to/3mheJXk
(Audio upgrade)
GoPro Hero 9/10 Media Mod amzn.to/3LQRhMD
GoPro Chest Harness :: amzn.to/3Fl7NSa
Bike Security
Kryptonite 10mm Chain Lock: amzn.to/3F5BdmU
Kryptonite Lock (Folding) :: amzn.to/3B1331b
Motion Alarm :: amzn.to/3A3Fio8
Caliper lock Alarm :: amzn.to/3zVE0eD
Doggy Hut Premium Dog Trailer (4 color options) :: amzn.to/3vwLc1J
Song :: artlist.io/son...)
What did you use to take up the space on the fork against the light? I have the same lights and they are definitely loose on the forks.
Is the head of the zip tie tight to the light? I did have a little space but I wrapped some e-tape around the spot where it landed.
You didn’t have to use a wire harness? Looks like every other turn signal mod uses it
No the wires already existed in my RCR1.5, in think the old bikes needed a harness
@@TheMirandaSquad gotcha. Thanks! I have a 1.5 also, but there seems to be different ways people are doing this mod!
@@RyanFreshhh I don’t know why you would want to add an extra harness if it’s already built in. Are these other people adding multiple turn signal lights on the front or back? In that case I can see creating a small harness to combine the cables essentially making a harness.
do you know why only half of my lights blink? is it wrong with the product or my setup
If only half of the strip works then I would assume the product is faulty and you should get an exchange. Is it happening on both pieces of just one
You did the front only? Can you run a double set to the back?
For the fork mount I only did the front ones but under the seat in the tube are 4 more wires(on the RCR 1,5) to do the rear. I will probably do a video on it once I make up my mind on what I want on the rear
@@TheMirandaSquad Do I need the 2-Pin Electronic LED Flasher Relay or is that on my bike already? On the bike it appears to have it seeing that I have the switch on the bars already?
With my RCR 1.5 I did not need to add a relay. It worked as soon as I wired it in
@@TheMirandaSquad I sure appreciate the feed back and the video.
Skilz!
Thank you!
I got these and they start flashing randomly while I’m riding
they cant light without power, the issue is probably on the switch