ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2024
- Join Kenta as he introduces the all new Dual-Port Soldering Station, FX-972. A 200W station with a wide temperature range that supports up to (8) different handpieces. The FX-972 station uses a minimal footprint design that allows multiple units to be stacked to conserve bench space and includes a new easy-to-read display that is more than 3 times larger than the FM-203 and displays set temperature and sensor temperature simultaneously.
0:00 Eye On Hakko Intro
0:50 FX-972: Introduction
2:15 FX-972: Basic Specs
6:45 Handpiece Showcase
7:22 FX-9701/FX-9702: Standard Handpiece
8:30 T39 Standard Tip Series
9:50 FX-9703/FX-9704: Micro Handpiece
11:04 T50 Micro Tip Series
12:09 FX-9705: Rework Tweezers
12:43 T51 Rework Tweezer Tip Series
13:25 FX-9705: Operation and Adjustments
16:52 FX-9706: Micro Tweezers
17:30 T52 Micro Tweezer Tip Series
18:07 FX-9706: Operation and Adjustments
23:03 FX-9707/FX-9708: Heavy-Duty Handpiece
23:56 T53 Heavy-Duty tip series
24:33 FX-9707 Operation and Tip Removal Demo
26:34 FX-972: Short Info Recap
27:50 FX-972: Operation Deep Dive
35:35 FX-972: Tip Testing and offsetting with the FG-100B
39:01 FX-972: Hakko Control Software
58:55 Outro
Learn more here: hakkousa.com/fx-972-dual-port...
----------------------------------------------------------------------------------------------------------------
Follow Us on Social @HakkoUSA
Facebook: / hakkousa
Instagram: / hakkousa
X: www.x.com/HakkoUSA
#hakko #hakkousa #manufacturing #electronicsmanufacturing #ipc #ipcapexexpo #apex #apex2023 #soldering #solderingstation #solderingiron #soldering #solderingstation #new #webinar #howto #diy - แนวปฏิบัติและการใช้ชีวิต
When it will be avaliable at Amazon again?
Question do you guys have a station or a device that can be used for when building a circuit on a pcb, 5v or 12v to send power to the parts. I see some Chinese irons got this feature. im just asking. This Iron will be my go to device for doing some work. I don't see it at all on amazon so will have to buy it from you guys directly.
When it will be available at indonesia
Hakko fr 810 new versions 😢?
If the software recognizes that a medium iron is plugged into the base, then the software should automatically limit the maximum temperature the user can set (on the slider) to 850 instead of 940 as shown in the video. It already knows > 850 is not allowed so why not just limit the slider to the valid parameters of the iron plugged into the base?
Not impressed with the weller brand so far. 2 pen types, one failed the other no spare tips available. So far from all ive seen i think i will make an effort to buy a hakko. Currently my ps4 controller has stick drift. I bought two magnetic hall effect sticks to replace the old ones but god damn are they a bitch to unsolder from the board. The chinese tip set i bought for my weller just were not durable and the enamel eroded or got scrapped off and could not transfer the heat efficiently into the solder on the board. And forget using a solder wick. I was thinking to just buy a hakko tip and use it on my already butchered weller, but i think i might just buy a whole hakko unit instead. So now i have a question for you, which model would you recommend for situations such as my ps4 controller? I really dont think they wanted anyone to desolder the joysticks at all bcoz the weller handled the vibration motor wires very easily. I didnt have low melt solder on hand, but i managed to wiggle the joysticks off the board however i am currently having trouble cleaning the holes to mount the new sticks. Its quite frustrating. The weller has been doing the job up until this point, ive done many jobs with it. Its only a 40w unit. But anything with a heatsink on it just soaks up the heat and wont melt the solder. And now this ps4 controller. Let me know pls, most likely the purchase will made off amazon.ca.
👌🙏