*Support what we do at* www.kmtools.com *Crazy Strong N52 10mm X 5mm Magnets 10 Pack* shop.kmtools.com/magnets *Sign Up for Our Newsletter for Product Announcements, Secrets Deals, and our Weekly Blog* shop.kmtools.com/newsletter *This Week's Blog: How to Build and Use a Shooting Board (FREE PLANS): The Hand Plane Super-Jig* kmtools.com/blogs/news/how-to-shooting-board *Jointer Injury Video* th-cam.com/video/0t6SZZJAhms/w-d-xo.html *Serious Injury in the Shop - What Medical Professionals Need You to Know* th-cam.com/video/vuQ1NNzhMas/w-d-xo.html
Dad worked with wood his whole life. He was 80 when he took three fingers off with his jointer. His advice? Never lose focus. During any operation on any tool, never think about anything other than what you are currently doing. Second bit of advice? Never do any operation on any tool that doesn't "feel right". If it feels like you are doing something that isn't safe, it likely isn't, and you should find a different way to accomplish what it is you are trying to do. There are typically many ways to do something safely.
My dad was a finish carpenter and every time he cut himself was on the table saw because he lost focus. Yes, I said every time - 3 times to be exact. The third time he finally lost 2 fingertips for good.
I'd also add the third thing would be that if something does go wrong, step away. Don't try to save a piece that's unstable, or try to release a jam with the machine running. Just let it go and if it flies across the workshop, that's ok (you're not standing in the path, right?). Turn the machine off, reset everything and start again. Broken blades or work pieces can be replaced.
oh my aint that the truth , i been woodworking 6 months , ive had a grindng ball on angle grinder grab shoe lace managed to turn off as trousers wer wraping in it grazed toe bad , then a nip by the kerf on table saw and a chizel into finger and last week top skin layers of finger in jointer , not to mention chop saw kick back that sent the blade guard across room at high speed very lucky not to be in its path , ive rethinked my work teqniue , but scared now of it , its no safe place to work in , its all limb trashing hazzard zone , i must remember that one
@TheLucidScreamz you should not be having that many close calls. If you are then you are working in a very unsafe manner. You are going to get seriously injured if you keep going like that.
If you simply WATCH what you're doing, you can use your hand (much better control) to hold the piece flat against the fence. I did benefit from some of these tips though. Thanks.
Another safety tip that's always worth repeating. Never use a power tool when tired. It's just not worth the risk. Love the channel, and your shop. Bought a SawStop recently and put in one of the CMT blades from your site. So very smooth. Loving it.
Tired or frustrated. I cut a dado in the end of a board that already had a rabbet the other day 😵💫 I’d been doing setup and test cuts for a couple hours and was thinking “finally I’ve got this right!” Still need to stop *before* I get there.
Drink a few beers and the frustration mellows out, then it’s safe to proceed. If you are tired, put on your glasses while you close your eyes to rest, then you can see to continue.
Safety First! Got my first table saw many years ago. Was learning to use it the day the radio announced Elvis's death. Am grateful that I never had to pay dearly for my many recklessnesses. Am VERY serious now (my ex- used to teasingly call me "The Safety Officer"). Looking forward to taking my new jointer out of the box. Appreciate your good efforts, Jonathan. First vid, have subbed. Aloha
So happy to hear "The fact you are terrified makes you respect it." Have been working with tools that take away but do not give back for 30 years now, and that has always been my philosophy, still have all my working parts. Thanks for sharing your experience, and glad it wasn't worse.
I also saw your video on how fast the jointer accident happened and wanted to say your willingness to be human and teach for the greater good is so much appreciated brother!
Electrician here, with nearly 30 years in the trade. Swapping between voltages on a dual voltage motor should not change the RPM. I appreciate your video about jointers. I'm glad your injury wasn't worse. Thanks for sharing your knowledge with all of us weekend warrior woodworkers.
It may get your motor up to speed faster on start to go higher voltage since inrush amps and voltage sag will be lower. But I can’t say I’ve really noticed anything appreciable. Maybe your utility will appreciate it the most since your draw will be balanced on a split phase system. Honestly I’ve done this to free up 120v plugs more than anything since my shop is wired for both
Every few months I look for these comments/ videos about safety and injuries just so my blood runs cold and I remember to respect the tools. Once I keep hearing these stories it's good enough for me. As a hobbyist I can afford to just not work if I'm feeling tired or not up to it. Also I use the more powerful dangerous machines early on in my woodworking session when I'm most alert and focused and do stuff like glue ups and finishing last. I insist for my guys and myself to take a nice break when we're doing repetative tasks too. If I feel like my mind is wondering, I'll just take 5 and grab a drink/ take a short walk. Going to the hospital is never worth it, take a break to refocus even if it delays the project by a day. Hope this helps someone, I feel like we all need to hear it over and over again cuz it's easy to get comfortable or feel rushed to fullfill an order and that seems to be when injuries happen.
Excellent advice. I bought an 8" Wahuda helical jointer for $549 delivered (2 years ago) and it's handled everything I've run through it, mostly hardwoods. Takes up little space, attached to a homemade rolling cart and I'm STILL on the first set of blades- only have needed to rotate a couple. Excellent choice if you have a smaller shop or on a budget. Brother Riv
I’m not a master craftsman and have been watching all your content but this one really spoke to me. “Back to basics” one comment read - yes, more of these please. Not to dumb down your content but more info like this along with your usual expert advice on the finer aspects of woodworking would be welcome. Plus love the humility of mentioning your injury and ensuing respect for the tools we use is VERY important. It’s as if I am getting advice from a trusted friend and not a career TH-camr. Well done sir!!
After nearly 50 years of woodworking, I accidentally grazed my thumb on the tablesaw. I instantly re-gained new respect and caution for all my tools. It's a hard lesson to learn, but was probably overdue. Thanks for a great video. PS, I'm getting a lot of use from my dovetail guide and, after getting the feel for the angles, have been free-handing some cuts recently.
About checking the fence for square when buying a used machine: Check it across the entire length, as the fence may be bent/warped. Especially aluminium ones, but I've seen bent iron fences too.
I liked your safety tip on where to locate the fence. I inherited a Shopsmith Mark 5 from my father. He got it “used” in 1955 along with a jointer. A few years ago I ask a sales rep at Shopsmith why they did not make a 6” jointer and was told quite politely that I would not be able to lift it on and off the Shopsmith. The operating instruction for this jointer indicate that the blades can be ever so slightly higher than the out feed table. Thank you for all of the useful information you provide.
A couple of safety things that I learned the very hard way: Don't joint end grain (duh, but I didn't know any better at the time), and be very mindful of knots in the wood that could vibrate loose and go flying towards your face. I'm very glad I was wearing safety glasses even though I didn't think I needed them with the jointer but I just decided to throw them on anyhow.
YOU are prescient! Two days ago, I installed the first jointer I've owned since I got rid of one about 30+ years ago! Your timing for this video was perfect! I find your videos to always be first rate, but this one takes the cake! Thanks so much, Jonathan! (from "Canter Lane Woodworking", Springfield, Oregon)
Thanks so much for this video. I am very glad that you did not lose your fingers Jonathan. Appreciate the safety info in this video. I am new to jointer tools so this really helps.
Great video! I love my jointer. I'm in New Zealand so it's 240 volts, and it's 15 amps. 12 inches wide, spiral cutterhead, and it's a combination jointer and planer. It's actually really quick to convert between modes. And in a smaller shop (6 x 10 metres), it's the way to go.
This is an immensely helpful video. I use my vintage Craftsman jointer regularly but I have questions about my procedure. You’ve covered all the bases. Thank you.
Thank you so much for covering bases on safety and buying a Jointer Last Thursday I bought a Rockwell/Delta 6” Deluxe Jointer. Year 1978. Had no fence or factory guard or motor. I had a 3450 motor. Got cutter head RPM to 5018 with my pulley setup. Working on locating a fence. Had a wooden guard that works ok. It is co-plane flat. Tad of rust on both beds. Still cleaning gently. Only cost $50
Thank you for this. I recently discovered the need for and also that I enjoy working with power tools quite a bit...but no one ever taught me anything at all whatsoever. so I bought a reciprocal saw, a circular saw, a multi-tool, a drill, a driver and a brushless drill driver so far, I'm pretty sure there's more and this has been in two months time. I was looking to buy one of these. Considering that I sawed the cord in half from my circular saw the second time using it and my brushless drill grabbed my hair and knocked me around a bit, you may have just saved my life...lol. but really though. thank you.
I don't have a jointer yet, but I do have 15 minutes 😅 Someday I'll get to put this knowledge to use, but until then I'll keep binging your router videos. Thanks again, and take care, JKM!
Thank you very much for the video and information. as mechanical engineer and I work on plenty of machinery, I will say that all machinery must be handled with care and never let your guard down. Always be aware and if in doubt, do not do it. Thank you very much for your time and videos.
NICE tips. Thanks for sharing. One time my brother in law ended up putting his whole hand on the cutter, as the wood from under slipped (backward or forward). It looked bad for long time.
So great! You’re so cool and committed to the woodworking community! Thanks for the tips and safety info; much appreciated. Wanted to ask: spoiler alert “silly question” when do you know the square cutter heads or planet blades are no longer sharp and need to be changed or rotated? Are there clear signs we should be looking for? Thanks 😊
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. th-cam.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
Perfect timing and I learned a lot about jointers. I just started planning on how to take care of my grandfather's jointer I recently inherited. It's a 6" Woodtek that's pretty similar to a Rockwell 37-220. It needs to be taken apart and painted since it's starting to have some rust spots, but overall it's in good shape.
Be mindful of auctions and estate sales. While some might have some great selections, there are many bidders that will up the price to the point you can get new, or refurbed. And if you buy online, pay the liftgate service fee...well worth it with these cast iron jointers, planers, saws...
Thanks for the great video. I've just bought my first jointer and this video had a lot of helpful info for first-time users. The unit I bought is a combo jointer/thicknesser. Any tips on jointing boards wider than the jointer when your thicknesser is the same width as your jointer?
I bought a bench top jointer a few years ago. I’ve been looking for a jointer ever since. You get what you pay for. I’ve learned my lesson. I’ll never buy from that company again.
I really wanted a 8" Jointer but it was slightly out of budget and space is tight in my shop. Instead of wishing I had an 8" Jointer I got a cheap small 6" Jointer for under half the price and can do 90% of what I would do with an 8". Im a huge proponent of buy once cry once but sometimes you need to try once first, the tools we want are not always the tools we need. I would love to have an 8 or 10" Jointer but I am in no rush to upgrade now that I have a jointer.
I needed this. Thanks. I don't have a ton of experience with my 6" Porter-Cable jointer anyway, but the last time I used it, I ruined a board for my purpose by jointing the edge until the board became a trapezoid. Was that because I wasn't shifting my pressure to the front? One tip that I learned recently that I'm surprised you didn't make: Throw those push pads away and get a pair of concrete floats with the red sponge rubber. Run, don't walk. They grip like crazy with very little pressure. You will never go back to the ones that are sold as push pads. Trust me on this.
Jamie Perkins of Perkins Brothers channel had a horrific jointer accident. After watching his videos on the whole thing, I most certainly have a new level of respect for this machine!!
Totally understand the point of avoiding bench top planers. Right now I only do smaller projects. But my question is do you think bench top are easier to learn on, or would you consider a beefier, well tuned larger jointer to be safer? I'm just terrified lol
Dude... #mindblown - I have been running my old grizzly (Craigslist purchase) for the past two years with the outfeed table just a *hair* lower than the cutting edge of the blade... quick fix, but thanks so much for sharing this, and for the super important safety reminders!
If I have a good jointer, I don't need an expensive thickness planer, I used to under score the importance of a jointer not until I discovered that squaring stock of is number one procedure to accurate results of a project, thank you for the video.
Thanks for the video Jonathan. I have a jointer and frankly it freaks me out every time I turn it on. I’m trying to become more comfortable around it, but it’s a work in progress. I’m constantly worried about not just my hand/fingers but also my arm once I’m applying pressure on the outfeed side since my arm is now over the cutter head. This is one of those tools that can change your life in the blink of an eye.
Don’t use it unless you have a power feed and all round guarding. Use a hand held Stanley jointer plane and a thicknesser. I’ve been doing that for decades. It’s only in videos that the wood going through is straight grained and knot free quarter sawn. Better still buy wood that doesn’t need jointing.
Great video. Very helpful. Thanks! P.S. "Coplaner and parallel" is redundant. All planes that are coplaner are also parallel. When parallel planes are coplanar they intersect at every point. When parallel planes are not coplanar they don't intersect at any point. Perfect infeed and outfeed tables are always parallel planes but only coplaner when they're at same height. A cube has 3 sets of parallel planes but no sets of coplaner planes.
Thank you, this was immensly helpful! To clarify: you advice buying a heavy big used jointer? I live in Sweden. Are there any particular brands or machines to avoid? I have watched several videos on jointers and planers. I understand the difference now. Do you think it's also best for me to use a heavy big used planer? What kinds of prices are we looking at here? €1.000 per machine?
Thanks again Jonathan for another great video. Only having a small 8x12 workshop as im only starting out i haven't got the room for a jointer.... one day hopefully.
Small shop guy here. Try a jointer plane. It takes a little practice sharpening and keeping your strokes square on edges, but once you get it down you'll be happy to have saved yourself several square feet of floor space and hundreds of dollars. My electric jointer is nothing but a shop real estate hog now.
Hey Jonathan, thanks for the video. Quick question, does your dewalt planer snipe your boards? I noticed in your videos you tend to run a piece that is cut to length right through it without the worry of snipe. Thanks
Ok. So love the program content. Generally speaking. One can never have enough knowledge. Im a 30 yr carpenter. Never owned or used a jointer. Never really had the need for one. I think 💭. But I’m curious about them. I’ve always been a trim carpenter. Built around 30 sets of cabinets. Multiple ET centers and built in units. Always used S3S. I use a 10 ft piece of aluminum with cam locks to straight line my boards. My question is what did you mean by coplane? If I said that right? To check it when buying. Thanks Dave
The only thing slipperier than a waxed jointer are the paddles that come with them. Use one on the front as a hold down and a push stick on the back to move the wood forward. Everyone with experience knows what I’m talking about. Like all power tools, keep them close and easy to grab. 1:15 demo of paddles sliding instead of gripping.
Great video,, I owned a Grizzly 6" that I sold out of necessity ( had to move shop with nowhere to go, so craigslist took all my tools one by one. I'm back with a smaller shop and just this morning ordered Grizzly's 8" combo jointer planer. I also just got several species of live edge hardwood. I got a 12' long red oak board about 12-14" wide. Its massive. already cut it down to an 8' and a 4'. I'm gonna start cutting some of it into 8" pieces But I'll hold onto that massive 4' piece of oak for a while. There's a sawmill in town, I'll have to ask how big their jointer and planers are. ok I'll stop rambling, again great video, it's been ten years since I operated one of these things, so refresher course is good! 😵💫
I want a jointer a lot, but I think about things like losing fingers/tips and it makes me want to continue to either use my lunchbox planer as a jointer, manually sand the edges of my boards on a hard flat surface for glue ups, use a hand plane or just get a lumber mill to do the jointing for me.
Good video. Lots of info, I wish I had seen this a few weeks ago as I had some boards wider than six inches to joint. I had to saw them down to six inches, what a waist.
My jointer actually has a non'slip coating on it. Makes it far less often that I need to worry about waxing or anything. Otherwise, all the same stuff. Great video! Always good to think about the stuff like moving up the fence and putting pressure in the right places.
Safety is very dear to my heart, especially after working almost 40 years in the oilfield. I always give serious consideration to "what might happen" during an operation and ensure safeguards are in place. I think about every cut at the miter saw (boards not flat), every hole at the drill press (is there a fence to hold it in position), every run through the jointer and planer, and especially every cut through the table saw. Yep, I still have 10 digits, but it comes with preparation and planning.
My dad took a finger tip off on an old jointer missing the guard so of all the power tools I have I have the greatest fear/respect for the jointer. I got rid of that old jointer and replaced it with a new Delta with a proper guard and I always make sure my hands are never over that cutter head.
Great stuff, Jonathan. I know the test pieces used here are for illustrative purposes, but what is the shortest length work piece you would recommend running through a jointer? Seems to me that a very short board is more unstable when transitioning from infeed to outfeed side.
@Travis Radke I'd agree with that. I had 8.5" long 2x4 scraps just to test out my jointer. I was slow and deliberate, but I don't see myself doing that again. Just made me a little nervous.
We have those bridge type guards in New Zealand as well. I found it a bit weird lifting my hand over but once you have a done it a few times it is just what you do. They must be an option because the same machines are available in Australia with the flappy sprung gate thing.
*Support what we do at* www.kmtools.com
*Crazy Strong N52 10mm X 5mm Magnets 10 Pack* shop.kmtools.com/magnets
*Sign Up for Our Newsletter for Product Announcements, Secrets Deals, and our Weekly Blog* shop.kmtools.com/newsletter
*This Week's Blog: How to Build and Use a Shooting Board (FREE PLANS): The Hand Plane Super-Jig* kmtools.com/blogs/news/how-to-shooting-board
*Jointer Injury Video* th-cam.com/video/0t6SZZJAhms/w-d-xo.html
*Serious Injury in the Shop - What Medical Professionals Need You to Know* th-cam.com/video/vuQ1NNzhMas/w-d-xo.html
Dad worked with wood his whole life. He was 80 when he took three fingers off with his jointer. His advice? Never lose focus. During any operation on any tool, never think about anything other than what you are currently doing. Second bit of advice? Never do any operation on any tool that doesn't "feel right". If it feels like you are doing something that isn't safe, it likely isn't, and you should find a different way to accomplish what it is you are trying to do. There are typically many ways to do something safely.
My dad was a finish carpenter and every time he cut himself was on the table saw because he lost focus. Yes, I said every time - 3 times to be exact. The third time he finally lost 2 fingertips for good.
I'd also add the third thing would be that if something does go wrong, step away. Don't try to save a piece that's unstable, or try to release a jam with the machine running. Just let it go and if it flies across the workshop, that's ok (you're not standing in the path, right?). Turn the machine off, reset everything and start again. Broken blades or work pieces can be replaced.
oh my aint that the truth , i been woodworking 6 months , ive had a grindng ball on angle grinder grab shoe lace managed to turn off as trousers wer wraping in it grazed toe bad , then a nip by the kerf on table saw and a chizel into finger and last week top skin layers of finger in jointer , not to mention chop saw kick back that sent the blade guard across room at high speed very lucky not to be in its path , ive rethinked my work teqniue , but scared now of it , its no safe place to work in , its all limb trashing hazzard zone , i must remember that one
@TheLucidScreamz you should not be having that many close calls. If you are then you are working in a very unsafe manner. You are going to get seriously injured if you keep going like that.
@@TheLucidscreamzfind a new hobby
Love the tip for jointing wider than your cutter head! I've never seen this before, anywhere.
I have seen it before, but it never hurts to be reminded.
If you simply WATCH what you're doing, you can use your hand (much better control) to hold the piece flat against the fence. I did benefit from some of these tips though. Thanks.
Another safety tip that's always worth repeating. Never use a power tool when tired. It's just not worth the risk. Love the channel, and your shop. Bought a SawStop recently and put in one of the CMT blades from your site. So very smooth. Loving it.
Tired or frustrated. I cut a dado in the end of a board that already had a rabbet the other day 😵💫 I’d been doing setup and test cuts for a couple hours and was thinking “finally I’ve got this right!” Still need to stop *before* I get there.
Drink a few beers and the frustration mellows out, then it’s safe to proceed. If you are tired, put on your glasses while you close your eyes to rest, then you can see to continue.
I followed your advice and my last 4 employers were not happy.
That tip about jointing a board wider than the jointer was well worth the price of admission!
Safety First! Got my first table saw many years ago. Was learning to use it the day the radio announced Elvis's death. Am grateful that I never had to pay dearly for my many recklessnesses. Am VERY serious now (my ex- used to teasingly call me "The Safety Officer"). Looking forward to taking my new jointer out of the box. Appreciate your good efforts, Jonathan. First vid, have subbed. Aloha
So happy to hear "The fact you are terrified makes you respect it." Have been working with tools that take away but do not give back for 30 years now, and that has always been my philosophy, still have all my working parts. Thanks for sharing your experience, and glad it wasn't worse.
Back to the basics 👌🏼. We ALL need to hear the safety tactics from time to time. Thanks 🙏🏼
I also saw your video on how fast the jointer accident happened and wanted to say your willingness to be human and teach for the greater good is so much appreciated brother!
I enjoy that you still use A older jet Jointer and a Dewalt 735planer.
Electrician here, with nearly 30 years in the trade. Swapping between voltages on a dual voltage motor should not change the RPM. I appreciate your video about jointers. I'm glad your injury wasn't worse. Thanks for sharing your knowledge with all of us weekend warrior woodworkers.
And the amps will be lower
It may get your motor up to speed faster on start to go higher voltage since inrush amps and voltage sag will be lower. But I can’t say I’ve really noticed anything appreciable. Maybe your utility will appreciate it the most since your draw will be balanced on a split phase system. Honestly I’ve done this to free up 120v plugs more than anything since my shop is wired for both
Every few months I look for these comments/ videos about safety and injuries just so my blood runs cold and I remember to respect the tools. Once I keep hearing these stories it's good enough for me. As a hobbyist I can afford to just not work if I'm feeling tired or not up to it. Also I use the more powerful dangerous machines early on in my woodworking session when I'm most alert and focused and do stuff like glue ups and finishing last. I insist for my guys and myself to take a nice break when we're doing repetative tasks too. If I feel like my mind is wondering, I'll just take 5 and grab a drink/ take a short walk. Going to the hospital is never worth it, take a break to refocus even if it delays the project by a day. Hope this helps someone, I feel like we all need to hear it over and over again cuz it's easy to get comfortable or feel rushed to fullfill an order and that seems to be when injuries happen.
Excellent advice. I bought an 8" Wahuda helical jointer for $549 delivered (2 years ago) and it's handled everything I've run through it, mostly hardwoods. Takes up little space, attached to a homemade rolling cart and I'm STILL on the first set of blades- only have needed to rotate a couple. Excellent choice if you have a smaller shop or on a budget. Brother Riv
This type of video is an invaluable service to us all. Thank you so much!
Thanks for the 101, just got my first jointer, an old 6" Rockwell that came from an old timer that took very good care of his tools.
Great video. I have HAD MY JOINTER ALMOST 2 YEARS. LEARNED A LOT. THANKS FOR THE GREAT VIDEOS
Nice. So many people I watch don’t realize the downward pressure needs to be on the outfeed side, glad you made that clear
I’m not a master craftsman and have been watching all your content but this one really spoke to me. “Back to basics” one comment read - yes, more of these please. Not to dumb down your content but more info like this along with your usual expert advice on the finer aspects of woodworking would be welcome. Plus love the humility of mentioning your injury and ensuing respect for the tools we use is VERY important. It’s as if I am getting advice from a trusted friend and not a career TH-camr. Well done sir!!
After nearly 50 years of woodworking, I accidentally grazed my thumb on the tablesaw. I instantly re-gained new respect and caution for all my tools. It's a hard lesson to learn, but was probably overdue. Thanks for a great video. PS, I'm getting a lot of use from my dovetail guide and, after getting the feel for the angles, have been free-handing some cuts recently.
Seems like it's always the table saw I still refused to use one
Great primer. I’m adding this to my “training video” playlist for new guys to watch.
About checking the fence for square when buying a used machine: Check it across the entire length, as the fence may be bent/warped. Especially aluminium ones, but I've seen bent iron fences too.
Just take it off and run it thru the jointer 😉
I liked your safety tip on where to locate the fence. I inherited a Shopsmith Mark 5 from my father. He got it “used” in 1955 along with a jointer. A few years ago I ask a sales rep at Shopsmith why they did not make a 6” jointer and was told quite politely that I would not be able to lift it on and off the Shopsmith. The operating instruction for this jointer indicate that the blades can be ever so slightly higher than the out feed table. Thank you for all of the useful information you provide.
A couple of safety things that I learned the very hard way: Don't joint end grain (duh, but I didn't know any better at the time), and be very mindful of knots in the wood that could vibrate loose and go flying towards your face. I'm very glad I was wearing safety glasses even though I didn't think I needed them with the jointer but I just decided to throw them on anyhow.
YOU are prescient! Two days ago, I installed the first jointer I've owned since I got rid of one about 30+ years ago! Your timing for this video was perfect! I find your videos to always be first rate, but this one takes the cake! Thanks so much, Jonathan! (from "Canter Lane Woodworking", Springfield, Oregon)
Thanks so much for this video. I am very glad that you did not lose your fingers Jonathan. Appreciate the safety info in this video. I am new to jointer tools so this really helps.
I'm a little late to the party but this is a great video for a newbie like me . Thanks for the safety tips 👍
Great video! I love my jointer. I'm in New Zealand so it's 240 volts, and it's 15 amps. 12 inches wide, spiral cutterhead, and it's a combination jointer and planer. It's actually really quick to convert between modes. And in a smaller shop (6 x 10 metres), it's the way to go.
This is an immensely helpful video. I use my vintage Craftsman jointer regularly but I have questions about my procedure. You’ve covered all the bases. Thank you.
Awesome review of safe practices. Great to have you cranking out videos more regularly again!
I'm glad your injury wasn't too serious, stay safe in the shop!
Thanks!
Thank you my friend
Thank you so much for covering bases on safety and buying a Jointer
Last Thursday I bought a Rockwell/Delta 6” Deluxe Jointer. Year 1978. Had no fence or factory guard or motor. I had a 3450 motor. Got cutter head RPM to 5018 with my pulley setup. Working on locating a fence. Had a wooden guard that works ok. It is co-plane flat. Tad of rust on both beds. Still cleaning gently. Only cost $50
Thank you for this. I recently discovered the need for and also that I enjoy working with power tools quite a bit...but no one ever taught me anything at all whatsoever. so I bought a reciprocal saw, a circular saw, a multi-tool, a drill, a driver and a brushless drill driver so far, I'm pretty sure there's more and this has been in two months time. I was looking to buy one of these. Considering that I sawed the cord in half from my circular saw the second time using it and my brushless drill grabbed my hair and knocked me around a bit, you may have just saved my life...lol. but really though. thank you.
I bought a bench top one and used it once and sold it. Holding out for an 8" that can be upgraded with a helical head or already has one. Great video
Just picked up a small bench top 6” jointer to start with for $50 - some great tips in here!
Thanks. I just bought a 6" one since I haven't done much large stuff. Hopefully it wasn't a mistake. And...I subscribed to your channel. Thanks again.
Very helpful tips & perfectly timed as I just picked up a used jointer without ever having operated one.
I don't have a jointer yet, but I do have 15 minutes 😅 Someday I'll get to put this knowledge to use, but until then I'll keep binging your router videos. Thanks again, and take care, JKM!
Thank you very much for the video and information. as mechanical engineer and I work on plenty of machinery, I will say that all machinery must be handled with care and never let your guard down. Always be aware and if in doubt, do not do it. Thank you very much for your time and videos.
NICE tips. Thanks for sharing. One time my brother in law ended up putting his whole hand on the cutter, as the wood from under slipped (backward or forward). It looked bad for long time.
So great! You’re so cool and committed to the woodworking community! Thanks for the tips and safety info; much appreciated.
Wanted to ask: spoiler alert “silly question” when do you know the square cutter heads or planet blades are no longer sharp and need to be changed or rotated? Are there clear signs we should be looking for? Thanks 😊
Harder to push wood through and chip out when there shouldn't be. Chips in the blades and maybe by feel. Does it catch ypur finger nail etc
Not a "silly question", the only silly question is the one that is not asked, my friend.
@@harrydavis6903 I've worked in retail and trust me, there ARE silly questions! 🤣 But this is not one of them.
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. th-cam.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
Perfect timing and I learned a lot about jointers. I just started planning on how to take care of my grandfather's jointer I recently inherited. It's a 6" Woodtek that's pretty similar to a Rockwell 37-220. It needs to be taken apart and painted since it's starting to have some rust spots, but overall it's in good shape.
Be mindful of auctions and estate sales. While some might have some great selections, there are many bidders that will up the price to the point you can get new, or refurbed. And if you buy online, pay the liftgate service fee...well worth it with these cast iron jointers, planers, saws...
Great video, the one bit of workshop kit that fills me with fear and I haven’t mastered to use properly yet.
Thanks for the great video. I've just bought my first jointer and this video had a lot of helpful info for first-time users. The unit I bought is a combo jointer/thicknesser. Any tips on jointing boards wider than the jointer when your thicknesser is the same width as your jointer?
So many great tips! I didn’t know my jointer could rabbet or joint wider boards.
I bought a bench top jointer a few years ago.
I’ve been looking for a jointer ever since.
You get what you pay for.
I’ve learned my lesson.
I’ll never buy from that company again.
I really wanted a 8" Jointer but it was slightly out of budget and space is tight in my shop. Instead of wishing I had an 8" Jointer I got a cheap small 6" Jointer for under half the price and can do 90% of what I would do with an 8". Im a huge proponent of buy once cry once but sometimes you need to try once first, the tools we want are not always the tools we need. I would love to have an 8 or 10" Jointer but I am in no rush to upgrade now that I have a jointer.
Really excellent tips, Jonathan! Thanks!!! 😃
Stay safe there with your family! 🖖😊
OUTSTANDING video, my friend. One of the best I've seen.
try the king 12" jointer planer combo! 1yr of heavy use and have only rotated 2 inserts, but cleaning is key especially pine gum
8:25 do you have to glue the plywood to the jointed side of the board or would it be fine to go in just resting on top of it
I needed this. Thanks. I don't have a ton of experience with my 6" Porter-Cable jointer anyway, but the last time I used it, I ruined a board for my purpose by jointing the edge until the board became a trapezoid. Was that because I wasn't shifting my pressure to the front?
One tip that I learned recently that I'm surprised you didn't make: Throw those push pads away and get a pair of concrete floats with the red sponge rubber. Run, don't walk. They grip like crazy with very little pressure. You will never go back to the ones that are sold as push pads. Trust me on this.
I have two other jointer videos that go into detail on technique. They should help. Cheers!
I’m a newer wood worker and this was an awesome video to watch. I am happy I subscribed to your channel a view months ago
Is there a certain wax you recommend to use on the jointer?
Jamie Perkins of Perkins Brothers channel had a horrific jointer accident. After watching his videos on the whole thing, I most certainly have a new level of respect for this machine!!
Yeah, his video about it should really show people how dangerous this tool can be.
Moonpie Creations had an accident with one 2 months after this video came out.
Just ordered my first one, so thank you for this
Great guy, teaching us all what we need to know.
Totally understand the point of avoiding bench top planers. Right now I only do smaller projects. But my question is do you think bench top are easier to learn on, or would you consider a beefier, well tuned larger jointer to be safer? I'm just terrified lol
Great Video, How much down pressure do you apply when jointing ??? TIA
New episode! Was watching old ones yesterday!
Dude... #mindblown - I have been running my old grizzly (Craigslist purchase) for the past two years with the outfeed table just a *hair* lower than the cutting edge of the blade... quick fix, but thanks so much for sharing this, and for the super important safety reminders!
Excellent advice, straight up! Thanks.
Great overview and safety tips. Never got bitten by a joiner probably because they are so intimidating.
Very insightful and educational. Love this channel
Been wanting to see you make this video for awhile, thank you!
Excellent video Jonathan, as always, I learned something new ... cheers mate!
If I have a good jointer, I don't need an expensive thickness planer, I used to under score the importance of a jointer not until I discovered that squaring stock of is number one procedure to accurate results of a project, thank you for the video.
Thanks for the video Jonathan. I have a jointer and frankly it freaks me out every time I turn it on. I’m trying to become more comfortable around it, but it’s a work in progress. I’m constantly worried about not just my hand/fingers but also my arm once I’m applying pressure on the outfeed side since my arm is now over the cutter head. This is one of those tools that can change your life in the blink of an eye.
Keep the guard on.
@@trolltaker I never take the guard off. Doesn't make it any less freaky.
Don’t use it unless you have a power feed and all round guarding. Use a hand held Stanley jointer plane and a thicknesser. I’ve been doing that for decades. It’s only in videos that the wood going through is straight grained and knot free quarter sawn. Better still buy wood that doesn’t need jointing.
Many thanks for the Sunday morning lesson :)
Great video. A jointer is on the horizon for my next powertool.
Great video. Very helpful. Thanks!
P.S. "Coplaner and parallel" is redundant. All planes that are coplaner are also parallel. When parallel planes are coplanar they intersect at every point. When parallel planes are not coplanar they don't intersect at any point. Perfect infeed and outfeed tables are always parallel planes but only coplaner when they're at same height. A cube has 3 sets of parallel planes but no sets of coplaner planes.
Thanks for the lesson on safety
Thank you, this was immensly helpful! To clarify: you advice buying a heavy big used jointer? I live in Sweden. Are there any particular brands or machines to avoid? I have watched several videos on jointers and planers. I understand the difference now. Do you think it's also best for me to use a heavy big used planer? What kinds of prices are we looking at here? €1.000 per machine?
Thanks again Jonathan for another great video. Only having a small 8x12 workshop as im only starting out i haven't got the room for a jointer.... one day hopefully.
Small shop guy here. Try a jointer plane. It takes a little practice sharpening and keeping your strokes square on edges, but once you get it down you'll be happy to have saved yourself several square feet of floor space and hundreds of dollars. My electric jointer is nothing but a shop real estate hog now.
@@MortimerSugarloaf i have recently found a 1932 stanley no.7 jointer plane. In the process of restoring it then practice, practice practice 💪
@@Spacepod96 awesome, dude! :D I hope you have so much fun with it. Enjoy!
Outstanding video. I see where I've been messing up.
Hey Jonathan, thanks for the video. Quick question, does your dewalt planer snipe your boards? I noticed in your videos you tend to run a piece that is cut to length right through it without the worry of snipe.
Thanks
Ok. So love the program content. Generally speaking. One can never have enough knowledge. Im a 30 yr carpenter. Never owned or used a jointer. Never really had the need for one. I think 💭. But I’m curious about them. I’ve always been a trim carpenter. Built around 30 sets of cabinets. Multiple ET centers and built in units. Always used S3S. I use a 10 ft piece of aluminum with cam locks to straight line my boards. My question is what did you mean by coplane? If I said that right? To check it when buying. Thanks Dave
The only thing slipperier than a waxed jointer are the paddles that come with them. Use one on the front as a hold down and a push stick on the back to move the wood forward. Everyone with experience knows what I’m talking about. Like all power tools, keep them close and easy to grab. 1:15 demo of paddles sliding instead of gripping.
THank you so much. DO you stand behind the jointer when you use it? It was not clear from the video.
No. I should've been clear that was for the shot
@@katzmosestools Thanks. This machine scares me too.
Very useful video, great tips and informations, thanks for sharing it with us 🙏🏼
Im a new woodworker and I just got a jointer. What kind of wax do you recommend? will any paste wax work?
Excellent tutorial...Thanks!!
Thank you for this !!! I love it. We have the same planer and jointer
All good advice. 👍👍
Maybe could have explained about how to joint a curved board and the correct way to present it on the jointer, ie bow up.
I've got that video on my channel. This is a beginner overview. I have two other more in depth videos. Cheers
@@katzmosestools Cool. 👍👍
A couple of very useful tips, thanks!
Great video,, I owned a Grizzly 6" that I sold out of necessity ( had to move shop with nowhere to go, so craigslist took all my tools one by one. I'm back with a smaller shop and just this morning ordered Grizzly's 8" combo jointer planer. I also just got several species of live edge hardwood. I got a 12' long red oak board about 12-14" wide. Its massive. already cut it down to an 8' and a 4'. I'm gonna start cutting some of it into 8" pieces
But I'll hold onto that massive 4' piece of oak for a while. There's a sawmill in town, I'll have to ask how big their jointer and planers are. ok I'll stop rambling, again great video, it's been ten years since I operated one of these things, so refresher course is good! 😵💫
Good video! I took the tip of my index finger off on my jointer last December. They will bite you and they bite hard if you’re not careful.
I want a jointer a lot, but I think about things like losing fingers/tips and it makes me want to continue to either use my lunchbox planer as a jointer, manually sand the edges of my boards on a hard flat surface for glue ups, use a hand plane or just get a lumber mill to do the jointing for me.
Good video. Lots of info, I wish I had seen this a few weeks ago as I had some boards wider than six inches to joint. I had to saw them down to six inches, what a waist.
My jointer actually has a non'slip coating on it. Makes it far less often that I need to worry about waxing or anything.
Otherwise, all the same stuff. Great video! Always good to think about the stuff like moving up the fence and putting pressure in the right places.
Nonslip?
Well how does the wax stick to it then 😂
Safety is very dear to my heart, especially after working almost 40 years in the oilfield. I always give serious consideration to "what might happen" during an operation and ensure safeguards are in place. I think about every cut at the miter saw (boards not flat), every hole at the drill press (is there a fence to hold it in position), every run through the jointer and planer, and especially every cut through the table saw. Yep, I still have 10 digits, but it comes with preparation and planning.
You are always great my overseas friend! 🌞🙏🏻
awesome tips, and i love your late night show too!
Always very informative, thanks and stay safe. Cheers from MT
I just subscribed. How to correct the little nip out of the end of my jointed work piece
My dad took a finger tip off on an old jointer missing the guard so of all the power tools I have I have the greatest fear/respect for the jointer. I got rid of that old jointer and replaced it with a new Delta with a proper guard and I always make sure my hands are never over that cutter head.
Great stuff, Jonathan. I know the test pieces used here are for illustrative purposes, but what is the shortest length work piece you would recommend running through a jointer? Seems to me that a very short board is more unstable when transitioning from infeed to outfeed side.
I’ve asked this before and I’ve pretty much always heard “don’t joint a board under 12” in length.”
@Travis Radke I'd agree with that. I had 8.5" long 2x4 scraps just to test out my jointer. I was slow and deliberate, but I don't see myself doing that again. Just made me a little nervous.
We have those bridge type guards in New Zealand as well. I found it a bit weird lifting my hand over but once you have a done it a few times it is just what you do. They must be an option because the same machines are available in Australia with the flappy sprung gate thing.