Nice video! I also find it odd that there is no OEM or OE equivlant option. They made a lot of these cars. You'd think there would be something to maintain the original look.
I didn't actually, I just kept that secondary high beam plug not connected. Didn't really know what to do with it, TBH. I suppose you could cut the plug off and wire it into the low beams, but not sure I wanted to have my lows that bright
Congrat's for a good workaround vid. I've just got a 2000 UK spec. Z3, RHD. I live in France and need to comply with headlight reg's here. This kit looks fit for purpose, but do you know whether the lights are configured for LHD. I imagine yes. These units are manufactured in China I think and are available in Europe. A question: when fitted is it still possible to raise and lower the trajectory of the light beams, i.e. to compensate for car load?
What's the best size wire to use. My blinker wire is a little short on my oem harness, I need to extend the wire on the headlights, and I'm not sure on what wire to get?
2 things- how did you get the last screw into the bottom of the headlight bracket? I'm struggling with this. Might have different for you since you have an after-market intake. Lastly, my corner light doesn't stay on like yours. It flashes as a turn signal. How did you wire yours?
Excellent install and video. Great job and looks much better.
Nice video! I also find it odd that there is no OEM or OE equivlant option. They made a lot of these cars. You'd think there would be something to maintain the original look.
Good vid explaining the set-up. I also have a set like these. Did you connect the other high beam bulb?
I didn't actually, I just kept that secondary high beam plug not connected. Didn't really know what to do with it, TBH. I suppose you could cut the plug off and wire it into the low beams, but not sure I wanted to have my lows that bright
Nice job!
Congrat's for a good workaround vid. I've just got a 2000 UK spec. Z3, RHD. I live in France and need to comply with headlight reg's here. This kit looks fit for purpose, but do you know whether the lights are configured for LHD. I imagine yes. These units are manufactured in China I think and are available in Europe. A question: when fitted is it still possible to raise and lower the trajectory of the light beams, i.e. to compensate for car load?
What's the best size wire to use. My blinker wire is a little short on my oem harness, I need to extend the wire on the headlights, and I'm not sure on what wire to get?
After I installed these headlights my fog lights on the z3 don’t work now? Any ideas?
I got one but it doesn't light ☀ ️ enough than the older one.
2 things- how did you get the last screw into the bottom of the headlight bracket? I'm struggling with this. Might have different for you since you have an after-market intake. Lastly, my corner light doesn't stay on like yours. It flashes as a turn signal. How did you wire yours?
Please take a look at Amazon to wire these things.
I wonder if those silver wires are actually galvanized copper like marine wire, in which case that is a benefit, indicative of high quality.
or maybe copper wire that's been tinned
@@jdc49939 Yes, you're right. I was thinking of tinning, not galvanizing.