Well done Romania - this is the sort of thing we used to do in the UK, before we outsourced most of our manufacturing to China and India. Glad to see some skills remain in Europe....
If it can be done small scale, it can be done large scale. 16g to 3" plate... doesn't matter, you just need the machine to do it and account for bend allowance.
Well that beats the old fashioned method of twenty men with sledge hammers,a furnace to heat the whole sheet and a pattern for them to hammer it over.It still amazes me how the locomotive boiler makers could produce such intricately shaped boiler/firebox fronts using the above mentioned method.Rather them than me!!
Looking at the state of the machine my guess is that this machine very recently was installed and that the entire workforce in that factory wants to see it in action.
When Australia could make this back in the 70s and 80s, where I did my trade we made a 5.5M x 6.35mm dish end just for hydrostatic testing. sad we can't do it any more :-(
***** Plenty of Americans are fat. There is an obesity issue that needs to be resolved. A culture that has an addiction to enormous servings of red meat, soda, and sugars needs to be offended. Source: I'm an American. PS. It was also funny :D
Here's 8 other countries with obesity rates higher than the US. So no, it wasn't funny. It was stupid. www.fitday.com/fitness-articles/nutrition/the-10-most-obese-countries-in-the-world.html
also UG-79 would be applied. upon forming in which the head should not exceed the calculated thickness. the thinnest portion of the head would be the knuckle portion. if the head exceeds the head should go through a normalization process.
SE heads 2:1 ratio most likely SA 516-70 and looks to be a partial in which a U-2 partial data report would be filed and also the seams would have to be 100% rt'd.
Wow..that's how those are made..we build vessels where I work I heard these vessels sell for millions to big oil producer's like chevron, aera, pxp, _______ (_______) that's what they look like big 60footers
11 ปีที่แล้ว
avanço da tecnologia, tomara que seja em beneficio do bem ! porque do mal o mundo ja ta cheio !
Not a racist, i call it like it see it. Take your pot and shove it. The rolling isn't important, any die will exert the same force on the member supporting it. In this set up, the die does not compress. Rolling makes the drawing incremental, but must be supported from behind (like the previous commenter suggested, which is ridiculously expensive and massive to have a mandrel that large). Another problem is the torque required to spin such a disk, which isn't/cannot be bolted at the center.
for the most part, our biggest export right now is empty cargo containers. there is truth in both statements, we used to do stuff like this on a much grander scale building our own stuff. making companies out of businesses, and products in factories, then legislation and to at least some degree even the unions have made it hard to run a manufacturing business here in america. so when compared to mexico and china where they don't care about the environment then no we don't do this here anymore.
I often wonder why people like you would post a comment such as this. There will always be a bigger, faster, more powerful, stronger, etc. piece of equipment. So why point out that you had a press that "put this one to shame"?
Dear Mr Joey S let me tell to you that we are glad that you have such strong machine but....our press is let say 8 times bigger that what you mentioned....so forgot about shame or keep it for your self
That video began in daylight and finished that single head the next day. Where I work we have a head press and it can produce that head in under 10 minutes.
quit crying about the lack of a hard hat,, in America, we take so long doing a JSA, job Plan, permits, etc, that those guys are finished before we ever get started..
Hard hats are only required when there's a risk of falling items from above on your head. when there's no risk, then it's not required. I work in a workshop, and I never wears hard hat.
wow here in Australia we do jsa working at heights confined space hot work permits you name it takes 4 hours to fill it in lol atleast safety is a priority
![[UNCUT] ฝันรักห้วงนิทรา | EP.9 (3/4)](http://i.ytimg.com/vi/ikd1tEhXbp8/mqdefault.jpg)
Beautiful!
Muito bom seus trabalho ! Já trabalhei com prensa e rebordeadeira boldrini no brasil .
Wonderful piece of engineering
Excelente trabalho ! com esse sistema de tecnologia da até para construir um disco voador maior ! valeu 10 !
parabéns.
Well done Romania - this is the sort of thing we used to do in the UK, before we outsourced most of our manufacturing to China and India. Glad to see some skills remain in Europe....
One huge wok ( suitable for a little village). The burners have to be made on a separate order or use a jet-engine to heat the pan.
отличный казан получился, весь Ташкент пловом накормить можно :)
That was amazing!
Extreme machine. ...finest technology. ...wounderful products
So powerful...yet so quiet
its a wonderful machining process
Nice work!
Very impressive, nice job
قمة في الابداع . ناس بتشغل عقلها وفكرها صح
تعرف الشغل ده بتاع ايه
If it can be done small scale, it can be done large scale.
16g to 3" plate... doesn't matter, you just need the machine to do it and account for bend allowance.
now do space travel.
nice job mister...
one wok to feed 1000 people
really nice video and work
That is quite amazing
make the same thing but from a lighter material and use it as a big snow sled
بتعرف عربى
Amazing... modern machine tekhnology...
Well that beats the old fashioned method of twenty men with sledge hammers,a furnace to heat the whole sheet and a pattern for them to hammer it over.It still amazes me how the locomotive boiler makers could produce such intricately shaped boiler/firebox fronts using the above mentioned method.Rather them than me!!
Amazing..... I wonder how much time it took for the whole process....
great ! of your friend of Brazil.
Looking at the state of the machine my guess is that this machine very recently was installed and that the entire workforce in that factory wants to see it in action.
Cool. Wondered how stuff like this was made. Is this the end of an air reciever/pressure vessel? How thick is the steel, 20mm?
Вот оказывается как скавородки делают))
When Australia could make this back in the 70s and 80s, where I did my trade we made a 5.5M x 6.35mm dish end just for hydrostatic testing. sad we can't do it any more :-(
How long was that first part of the "dishing" process?
It's a fry pan for the average US-citizen!
***** Plenty of Americans are fat. There is an obesity issue that needs to be resolved. A culture that has an addiction to enormous servings of red meat, soda, and sugars needs to be offended.
Source: I'm an American.
PS. It was also funny :D
haaaaaaaaaa
Jeffrey Lebowski lol
Jeffrey Lebowski What are they eat with that huge fry pan?
Here's 8 other countries with obesity rates higher than the US. So no, it wasn't funny. It was stupid.
www.fitday.com/fitness-articles/nutrition/the-10-most-obese-countries-in-the-world.html
it would be awesome to weld that on!
We still do, used to work at a shop that was way less advanced than this.
крутая тарельцовочная машина!
esse somos o seres humanos dominando as maquinas
neat bit of kit gents
Chapeaux bas
also UG-79 would be applied. upon forming in which the head should not exceed the calculated thickness. the thinnest portion of the head would be the knuckle portion. if the head exceeds the head should go through a normalization process.
é um investimento e tanto !
Good job
that is one freaking huge press..
Wonderful
mantap pembuatan wajan super jumbo👍
Paella time folks!
+nlo114 A new pan for the FAIRY ultra advertise?
SE heads 2:1 ratio most likely SA 516-70 and looks to be a partial in which a U-2 partial data report would be filed and also the seams would have to be 100% rt'd.
Missing QHS&E....!
(nice new rig though)
A la vanguardia en la tecnología,pero...carentes de protección personal.
Some of us still do!
Just when I think I have seen everything you guys go and make a 5 ton fajita cooking plate.
That is bad ass
god damn i fucking love machinery
king of the ping
pretty neat , please give me more info
amazing
captain america just called, he wants his shield back
la industrializacion hermano
Is there any sound in this video? The silence is driving me crazy!
How long do you think it would take to make that mould?
Wow..that's how those are made..we build vessels where I work I heard these vessels sell for millions to big oil producer's like chevron, aera, pxp,
_______
(_______) that's what they look like big 60footers
avanço da tecnologia, tomara que seja em beneficio do bem !
porque do mal o mundo ja ta cheio !
0:10 Day
2:05 Night
2:52 Day
Looks like a giant saucepan without its handle.
eso si es una linda paellera
Nice.
how long did it take to form?
вот это сковородочка,это я понимаю)
How long from start to finish on dishing and flangeing?
Not a racist, i call it like it see it. Take your pot and shove it.
The rolling isn't important, any die will exert the same force on the member supporting it. In this set up, the die does not compress. Rolling makes the drawing incremental, but must be supported from behind (like the previous commenter suggested, which is ridiculously expensive and massive to have a mandrel that large). Another problem is the torque required to spin such a disk, which isn't/cannot be bolted at the center.
Chuck Norris' frisbee ;-)
I am amazed to see that none of these workers have gloves on... or any other safety stuff. Nevertheless, nice technology!!
Тарелка чак нориса?!
so how long does it take to make one of these !??
nice wok
wery nice video
Many parts like this are manufactured in the US.
Try throwing a bowl like that on a foot powered wheel!
for the most part, our biggest export right now is empty cargo containers. there is truth in both statements, we used to do stuff like this on a much grander scale building our own stuff. making companies out of businesses, and products in factories, then legislation and to at least some degree even the unions have made it hard to run a manufacturing business here in america. so when compared to mexico and china where they don't care about the environment then no we don't do this here anymore.
We still do.
Agora traz o garfo e a faca!
XD
Очень интересно
Made it for Tefal?! :-D
Tibor Lenti pxoohjkplj
we had a 100 ton hydraulic press that put this to shame
I often wonder why people like you would post a comment such as this. There will always be a bigger, faster, more powerful, stronger, etc. piece of equipment. So why point out that you had a press that "put this one to shame"?
Dear Mr Joey S let me tell to you that we are glad that you have such strong machine but....our press is let say 8 times bigger that what you mentioned....so forgot about shame or keep it for your self
looks like a giant ashtray.
#7 Skillet. want fries with that?
Please provide the sound so we can hear the actual sounds of the machinery, processes, talking, etc
thats an ufo, no doubt
عاشت اليادي
انتا منين
How long did it take to make that? We build pressure vessels and waiting on heads is a major problem. I've wondered how they made these.
That video began in daylight and finished that single head the next day. Where I work we have a head press and it can produce that head in under 10 minutes.
¿dónde están sus cascos :)
BIG FRY PAN ... WOW...
increíble wauu
A lot of work for a XXXXXXL wok..😜
THIS MACHINE IS THE BOM! dMN
this machine from were
y en el minuto 3:44 ya podemos observar el *Disco para Paella* terminado!!
quit crying about the lack of a hard hat,, in
America, we take so long doing a JSA, job Plan, permits, etc, that those guys are finished before we ever get started..
Hard hats are only required when there's a risk of falling items from above on your head. when there's no risk, then it's not required. I work in a workshop, and I never wears hard hat.
wow here in Australia we do jsa working at heights confined space hot work permits you name it takes 4 hours to fill it in lol atleast safety is a priority
esta muy vien pero no tienen precio.
35mm thick??? - wonder what that can be used for ?
looks like a giant contact lense
can that be used as a steel musical drum?
if thickness more than 100mm, how to make it ?
We used to do shit like this in America.....
Не плохо. Но мне показалось что сильно трудоемко получилось.
SWEEEET *__*
Wtf are they using a vertical plate clamp or (camlock) like that for at the start!!!!