Very difficult!!! Next time you need to make a lid at the bottom so that you can conveniently and quickly remove and clean these lenses!! I expect this from you in the next projector.😅
This cleaning situation is special. It is usually impurities caused by impact during transportation of goods. We designed the projector very strictly to prevent it from being easily damaged and dust from entering. We also have one for shooting videos, but we use a small There has been no need to open the projector for internal cleaning in half a year. We will take your suggestions into consideration to design a better projector next time.
@@OMIKAI-me2zh This is not true because I open mine every Sunday to clean it. It gets dark spots at the bottom when i open it i find it full of dust. The projector is great dont get me wrong but it gets dust very easily on the lences
Thank you! Maybe you can find a professional to do this, I can't guarantee that your fan replacement process will be successful because there are a lot of internal parts.
Thanks for the video. My projector has a problem - the focus is either in the center or on the edges of the screen. Maybe it's because of the curved lenses (there are 2 of them behind the matrix - Fresnel lenses)? Maybe I need to replace them? Could you tell me what parameters these lenses have? Focal length or something else? Thanks
Amigo una pregunta, Si el LED del proyector se funde o deja de funcionar, es posible reemplazar por un LED nuevo o ya no se puede hacer nada? Saludos desde Colombia 🇨🇴👍🏻
Can i order new lenses? Because my projector lenses are so dust, because have a weird substancie inside the projetor that melted because of the temperature and dirty the lenses.
@@OMIKAI-me2zh não, é limpar a lente interna. Do lado do projetor tem um adesivo. Remove esse adesivo que você terá acesso a uma tampa. Remove essa tampa e você terá acesso as lentes internas. Porém só é possível limpar com hastes flexível de algodão
Yo no lo haría pero puedo bajar el vídeo para que lo vea uno de estos que hay acá que reparan radios y teles, seguro a ellos se les hace mucho más fácil desarmar y armar esta cosa, claramente habría que pagarles su trabajo pero no sería mucho.
Is there a lot of dust on the lens? The screen inside shouldn't have so much dust, because the display screen is relatively closed in the projector. We also have one for video shooting. We have been using it for several months, but there is no problem. There is so much dust that the machine needs to be turned on to blow it out.
@@OMIKAI-me2zh hi :) nope, when its on the lens i can just blow it out. Even a minor particle or a small hair getting inside on the small glass/ display will make small dots on the screen. I can show you pictures after 3 days of fully de assembling and cleaning
@@ArsaOfficial hi，Can you send it to me via FB or email, or WA? We have been using it to shoot videos for half a year, and there has indeed been no problem of opening the projector for internal cleaning. If possible, let me see the projection effect of your projector before and after cleaning. .
Hi,The polarizer foil of my hy320 slowly begins to burn-in after 2 months of use (2 big brownish blob spot in the middle) Where is it located and how can it be replaced?Thank you very much and Best Regard.
@@StefanShift th-cam.com/video/K-0u9FqI5oM/w-d-xo.htmlfeature=shared it's someone's job. Trust me, it's not an impossible mission.Thanks for your response.
Unfortunately, this projector does not have good focus. or it focuses on the middle or edges of the image...it's impossible to achieve 100% focus...I saw several cases on the internet including mine.
This is a 1080p projector, the projection effect is very clear, the projection distance should be within 1 meter to 4 meters, the darker the environment, the clearer it will be. You can watch the videos on my homepage, all of them are real shots.
@@OMIKAI-me2zh hi, I like the hy 320 for its value for money....I can't complain about that...but let's be honest, its focus is never 100% on the entire area of the screen...another thing that makes me sad is cleaning it every week, there should be more foam filters to solve this... Apart from these two details, he makes me happy....
Yes, I must agree, the projector doesn't have the best focus especially on the edges if the centre is in focus. And maybe use genuine 3M micropore tape on the vents to stop dust entering the projector when it is booted up for the first time.
Pra fazer a limpeza da lente deste projetor hy320, não precisa desmontar ele não . Do lado dele tem uma etiqueta, vc retira ela , que tem uma tampa . Basta retirar a tampa que já vai aparecer a lente , ae é só limpar com um cotonete , muito mais sempre , o HY 300 sim este vc tem que desmontar pra fazer a limpeza.
When you move and unpack these parts youre only lowering the lifecycle of the product.. Its a good projector but de assembling it every fee days it will last half a year
Is there a lot of dust on the lens? The screen inside shouldn't have so much dust, because the display screen is relatively closed in the projector. We also have one for video shooting. We have been using it for several months, but there is no problem. There is so much dust that the machine needs to be turned on to blow it out.
@@karlz4254 Have you removed the protective film on the lens? It will be much clearer after tearing it apart. It can be put back into the box after use. I have been using it for several months and it is still very clear. There is no need to disassemble the projector to remove dust.
@@ArsaOfficial Have you removed the protective film on the lens? It will be much clearer after tearing it apart. It can be put back into the box after use. I have been using it for several months and it is still very clear. There is no need to disassemble the projector to remove dust.
Very difficult!!! Next time you need to make a lid at the bottom so that you can conveniently and quickly remove and clean these lenses!! I expect this from you in the next projector.😅
This cleaning situation is special. It is usually impurities caused by impact during transportation of goods. We designed the projector very strictly to prevent it from being easily damaged and dust from entering. We also have one for shooting videos, but we use a small There has been no need to open the projector for internal cleaning in half a year. We will take your suggestions into consideration to design a better projector next time.
Tem vários vídeos, dizendo que está abertura lateral lacrada ao lado do projetor é para limpar as lentes, me explica se é para isso mesmo?
where can i buy replacement lenses for this projector?
@@OMIKAI-me2zh This is not true because I open mine every Sunday to clean it. It gets dark spots at the bottom when i open it i find it full of dust. The projector is great dont get me wrong but it gets dust very easily on the lences
Thank you 😊
aonde comprar uma tela polarizadora nova ?
I have the 300 version and I took mine and cleaned it but still dust on the media folder and next to it in the blue part of the background
Very nice job! but I can't see where is a fan. Hy320 fan is too noisy. Can I replace the fan to another silent one? like a Noctua fan.
Thank you!
Maybe you can find a professional to do this, I can't guarantee that your fan replacement process will be successful because there are a lot of internal parts.
@@OMIKAI-me2zh What kind of fan is used in the HY320? Can you tell us about the fan`s size and voltage specifications?
Thanks for the video. My projector has a problem - the focus is either in the center or on the edges of the screen. Maybe it's because of the curved lenses (there are 2 of them behind the matrix - Fresnel lenses)? Maybe I need to replace them? Could you tell me what parameters these lenses have? Focal length or something else? Thanks
Hello, I can't update my projector, the version is 20231013, I would like to know if there is one that allows the use of the Netflix application
Hi all. If you peel the sticker on the side, underneath there is small "hatch" that you can open and clean the lens with a cotton bud or similar.
I pilled the sticker there was nothing.
Muito fácil, me salvou
muito legal o meu apareceu manchas amarelas tenho que trocar o LCD ou só limpar?
You can send me pictures or videos to let me see what the problem is. I have WA contact information on my homepage.
O meu também apareceram algumas manchas amarelas. Conseguiu resolver ?
@@OMIKAI-me2zh pode passar seu WA aqui?
That thing that burned on the LCD panel because it was so hot, it's good to have it in a cold place so it doesn't heat up. @@brunolinsalves
Que top!!! Parabéns!
@OMIKAI-me2zh
Thak's for the vidéo, we need to know where to buy parts of this projector to fix it?
I have one need to be fixed.
Amigo una pregunta,
Si el LED del proyector se funde o deja de funcionar, es posible reemplazar por un LED nuevo o ya no se puede hacer nada?
Saludos desde Colombia 🇨🇴👍🏻
Si se puede y es facil, en aliexpress está el led
@enderortiz2095 puedes compartir enlace del led
Onde vc comprou ??
Purchased from Shenzhen Omikai Technology on Alibaba.
Hello. I want to ask you something. Is it possible to change the lamp to increase the brightness of this projection?
Not recommended, improper operation may easily cause machine failure.
can the flat cable from the LCD be changed for a new one or do I have change the whole LCD part?!
una pregunta como van las laminas correctamente tienen una parte con lineas y la otra parte es lisa
Hy 350 plis
Can i order new lenses? Because my projector lenses are so dust, because have a weird substancie inside the projetor that melted because of the temperature and dirty the lenses.
Tem uma tampa lateral no hy320 que dá pra vc limpar a tela com um cotonete sem precisar fazer isso tudo
Yes, but this video is about how to clean the black spots and debris on the internal display, you are talking about how to clean the lenses.
@@OMIKAI-me2zh não, é limpar a lente interna. Do lado do projetor tem um adesivo. Remove esse adesivo que você terá acesso a uma tampa. Remove essa tampa e você terá acesso as lentes internas. Porém só é possível limpar com hastes flexível de algodão
@@layowinI understood what you are saying like the window used for cleaning in some other projectors but this one doesn't have such a window I guess
@@averagestudent4358 tem sim. É só remover a etiqueta lateral. Você vai conseguir acessar uma tampa
@@averagestudent4358 th-cam.com/video/syECnVfqeoY/w-d-xo.htmlsi=Ax7H9qCmxLSBfAuP
I often clean the lens inside,fron the little door beside. There is a stuck very little spot. Can i use alcohol on the cotton swab?
Please dont it will damage the lences surface
ola!! BOA TARDE PRECISO TROCAR MINHA LÂMPADA DE LED , VC TERIA UM VÍDEO MOSTRANDO COMO FAÇO , E LINK DE COMPRA pROJETOR HY320
www.alibaba.com/product-detail/HY320-New-Arrival-magcubic-projector-4k_1601164209715.html?spm=a2747.product_manager.0.0.2c1871d24Dz9jp
Você pode encontrar o método de compra na minha página inicial. Enviarei o tutorial para substituir a luz LED quando estiver pronta.
Há algo errado com seu projetor? Qual acessório específico precisa ser substituído? Painel de luz ou luz indicadora?
I want to ask you please, i clean my projecter but i got a problem, the image became flou, why?
Hola,en dónde puedo comprar él display?
Berapa ukuran polariz hy320..?? Soalnya hy320 saya polariznya terbakar.
Yo no lo haría pero puedo bajar el vídeo para que lo vea uno de estos que hay acá que reparan radios y teles, seguro a ellos se les hace mucho más fácil desarmar y armar esta cosa, claramente habría que pagarles su trabajo pero no sería mucho.
I also keep having to clean it every 2 days, always get 2-3 big black dust spots at least :(
Is there a lot of dust on the lens? The screen inside shouldn't have so much dust, because the display screen is relatively closed in the projector. We also have one for video shooting. We have been using it for several months, but there is no problem. There is so much dust that the machine needs to be turned on to blow it out.
@@OMIKAI-me2zh hi :) nope, when its on the lens i can just blow it out. Even a minor particle or a small hair getting inside on the small glass/ display will make small dots on the screen. I can show you pictures after 3 days of fully de assembling and cleaning
@@ArsaOfficial hi，Can you send it to me via FB or email, or WA? We have been using it to shoot videos for half a year, and there has indeed been no problem of opening the projector for internal cleaning. If possible, let me see the projection effect of your projector before and after cleaning. .
Hi,The polarizer foil of my hy320 slowly begins to burn-in after 2 months of use (2 big brownish blob spot in the middle) Where is it located and how can it be replaced?Thank you very much and Best Regard.
Mate if the polarizing film is burnt you gotta replace the whole LCD display, you can't really remove the polarizing film without damaging the LCD.
@@StefanShift th-cam.com/video/K-0u9FqI5oM/w-d-xo.htmlfeature=shared it's someone's job. Trust me, it's not an impossible mission.Thanks for your response.
😂Devia mandar um pra mim,fazer propaganda no meu canal, ja fiz tanta do hy 300.
Unfortunately, this projector does not have good focus.
or it focuses on the middle or edges of the image...it's impossible to achieve 100% focus...I saw several cases on the internet including mine.
This is a 1080p projector, the projection effect is very clear, the projection distance should be within 1 meter to 4 meters, the darker the environment, the clearer it will be. You can watch the videos on my homepage, all of them are real shots.
@@OMIKAI-me2zh hi, I like the hy 320 for its value for money....I can't complain about that...but let's be honest, its focus is never 100% on the entire area of the screen...another thing that makes me sad is cleaning it every week, there should be more foam filters to solve this...
Apart from these two details, he makes me happy....
Yes, I must agree, the projector doesn't have the best focus especially on the edges if the centre is in focus. And maybe use genuine 3M micropore tape on the vents to stop dust entering the projector when it is booted up for the first time.
DESMONTEI O MEU HY 320 MONTEI E FICOU SEM SOM VC SABE O QUE PODE TER ACONTECIDO
Sim a sua curiosidade estrago o aparelho
Projetor novo e pessoal começa a desmontar pra ganha like kkk
thx.
Ta mu bien pero yo hice exactamente lo mismo y ahora no me efoca apenas más que el centro de la pantalla grasias
Can you give me a link to the firmware of this device?
give me your email,i will send you.
imi poate spune cineva, de ce proiectorul meu porneste iar la 10 secunde se opreste ?
Same problem, a lot of dust on the image, thats a big problem!
My projector is showing vertical lines after less than 10 hours of use, is it possible to fix it? It looks like a problem with the LCD.
Yes, it should be damaged internally, you can go to the merchant to exchange it.
Plz add 350
OK, I will upload it.
@@OMIKAI-me2zh thank you iam waiting.....
Pra fazer a limpeza da lente deste projetor hy320, não precisa desmontar ele não .
Do lado dele tem uma etiqueta, vc retira ela , que tem uma tampa .
Basta retirar a tampa que já vai aparecer a lente , ae é só limpar com um cotonete , muito mais sempre , o HY 300 sim este vc tem que desmontar pra fazer a limpeza.
O meu não tem
@@conteudoscuriosos205 mas o seu é o Hy 320!? Se for tem .
And 1 week later, more dust on the screen. I have a HY320 and this sucks.
why is it that bad and prone to dust
When you move and unpack these parts youre only lowering the lifecycle of the product.. Its a good projector but de assembling it every fee days it will last half a year
Is there a lot of dust on the lens? The screen inside shouldn't have so much dust, because the display screen is relatively closed in the projector. We also have one for video shooting. We have been using it for several months, but there is no problem. There is so much dust that the machine needs to be turned on to blow it out.
@@karlz4254 Have you removed the protective film on the lens? It will be much clearer after tearing it apart. It can be put back into the box after use. I have been using it for several months and it is still very clear. There is no need to disassemble the projector to remove dust.
@@ArsaOfficial Have you removed the protective film on the lens? It will be much clearer after tearing it apart. It can be put back into the box after use. I have been using it for several months and it is still very clear. There is no need to disassemble the projector to remove dust.
Та ні. Я той шлейф порву по любому.