Hey i just installed a sub yesterday in my audi a5 2012 but when i got done to turn on car after about 2/3hrs the car wouldnt start everything works inside just it won’t fire up but when i try to push/start it it comes on but no start but makes clicking noise like battery is dead 🧐🧐 do i need to jump it or since i disconnected the battery for a while it needs to be recoded??
I just bought an interstate battery from Costco but it doesn’t come with a BEM serial number, I seen people mention to just change one character from the old serial number, would that work even if the new battery is an AGM ?
Yes, because the battery management still think that it is still the old battery? You need to code it in order for the management to know that this is the new battery and to enable the start-Stop
Hi Pavel, if I change from EFB original battery to VARTA A8 AGM battery where do I need to select the new "type" of battery? Can you confirm that this tutorial is correct for Polo AW1 2018 too?
Yes, the tutorial is correct for the vehicle that you mentioned and the type of the battery in your case it will change so you should import that into the vehicle. This can happen by editing the battery type of adaptation value of the gateway.
How to get protocol uds? In my program its protocol can, also in my program i have long coding or long adaptation so its also all the same as in your video?
Hi I want to change my Audi A1 2016 1.4 start stop battery I have the battery code on top of current battery If buy a Varta battery with no code on top how do I register the new battery
Hey, I am going to change the battery on my 2019 Tiguan 2.0 TDI. I will be using a battery named Amaron. I do not see it in the list. Which name should I put?
@@pavelppp888 аз съм с оригинален акумулатор BMW ,към Варта ли спада и той ? Нямам въпросния сериен номер,който имат другите производители 10-11 цифрен ?
@@pavelppp888 my problem is that i don t know if the shop ceded the new battery ,and i have this problem with rpm going at 1000 ,not 900 ,and i checked and from alternator is going out 14.3 and in the back at the bateryy is 12.4 . Someatimes i got this management baterry code on vcds ,so i can not find the problem ,maybe is the cable because i was reading about the positive cable from a4 b8 2009 . Or there is a charging module or idk.😑
It have it only to the original batteries. If you bought a normal aftermarket, just change the currently stored serial number in the car to something else (for example change the last symbol) and store it that way. By doing this, the car will know that there is new battery installed.
It is a little bit different. You can search for “battery adaptation non-uds” and a video from Voss Tech will show you the procedure. I have done it on my a6 c6 some years ago
You can take a photos or write them manually down. The adaptation channels cannot be saved in a log file like the codings, at least I don’t know a way for that to be done.
Nope, you need the old method by coding the battery control module. Search for a6 2007 battery coding - that is the correct procedure for your vehicle.
You can use one of the codes that I show in this video to reprogram your car. It is just the module that is being reprogrammed. That is the difference.
Please, check the vendor ID and code in the vcds settings. You can google |vcds vendor codes" and try inputing a different one. This error can be caused due to messed up vcds settings and if the vendor id is incorrect, the procedures like coding and adaptations cannot be executed.
Are the other options available, such as “measuring values”. It is possible that the VCDS itself it’s old or unsupported and cannot interpret the adaptations and the bottom remain unavailable
This video should be highlighted. These are by far the most clear instructions on how to adapt your BEM to a new battery.
Thanks man flat it helped!
Hey i just installed a sub yesterday in my audi a5 2012 but when i got done to turn on car after about 2/3hrs the car wouldnt start everything works inside just it won’t fire up but when i try to push/start it it comes on but no start but makes clicking noise like battery is dead 🧐🧐 do i need to jump it or since i disconnected the battery for a while it needs to be recoded??
You can try to jump start, there should be no issues
@@pavelppp888 yea i was thinking the same thing because its the same battery not a new one im try jump tomorrow and see
I'm curious what the issue was? Bad battery or low on charge?
Excellent instructions, i just need to get vcds as i dont have one. How long an i drive the car without programming the new battery?
Up to a month is not problem
@@pavelppp888 great thanks, what happens if I leave it for longer? Any likely damage? Many thanks
@@markfogel3682no, just the charging cycles aren't optimised which I think is ridiculous.
I just bought an interstate battery from Costco but it doesn’t come with a BEM serial number, I seen people mention to just change one character from the old serial number, would that work even if the new battery is an AGM ?
Yes, this will work
@@pavelppp888thank you ! And last question, what would I put for the value/battery vendor if it’s an interstate battery ?
Actually nevermind, it was right in front of my eyes, I believe it’s possibly TU3/EXIDE
For a aftermarket agm battery without bem code what i can do for adaptation ?
You can use the one for Varta (VAO)
if my battery isn t coded, should i have a start stop sistem fault?
Yes, because the battery management still think that it is still the old battery? You need to code it in order for the management to know that this is the new battery and to enable the start-Stop
Hi Pavel, if I change from EFB original battery to VARTA A8 AGM battery where do I need to select the new "type" of battery? Can you confirm that this tutorial is correct for Polo AW1 2018 too?
Yes, the tutorial is correct for the vehicle that you mentioned and the type of the battery in your case it will change so you should import that into the vehicle. This can happen by editing the battery type of adaptation value of the gateway.
How to get protocol uds? In my program its protocol can, also in my program i have long coding or long adaptation so its also all the same as in your video?
If your vehicle is after 2010, it is using the UDS for the battery management.
Hi I want to change my Audi A1 2016 1.4 start stop battery I have the battery code on top of current battery If buy a Varta battery with no code on top how do I register the new battery
This is what is described in this video. Select the parameters of the battery in the gw module adaptations.
Useful tutorial 👌 Thank you
Stored value for bosch or willard ?
You can use Vao
I buy battery Moura can u tell me stored value please
Hi, is it necessary to code in the touran battery ? model 03 thanks
2003? No. After 2010 on most cars
@@pavelppp888 Thanks
So if the capacity is same, you skip the procedure?
Or write same value on a row below?
You need to enter a new serial number in order for the vehicle to know that the new batteries present?
Will a 2015 Passat 3.6 need to be adapted?
Yes. This tutorial is feasible for it.
What name should I choose for Grom?
You can try with “VAO”
@@pavelppp888 Thank you :)
Do the 2009 cars with obd can protocol, have this type of coding battery adaptation ?
Yeah, all from 2008 onwards should be with it. From the VW brands.
battery cod bosch ? varta = bosch? VAO ?
Please Subscribe and turn on the notifications, so you don't miss any of the new videos!
All Best Regards, Pavel Petkov.
Hey, I am going to change the battery on my 2019 Tiguan 2.0 TDI. I will be using a battery named Amaron. I do not see it in the list. Which name should I put?
Hi, you can put VAO (Varta)
What name i should choose for Bosch ?
The VA0 (Varta one) is used for Bosch. They are basically the same battery, just rebranded. Both Varta and Bosch are made in the same factory.
@@pavelppp888 thank you
@@pavelppp888 аз съм с оригинален акумулатор BMW ,към Варта ли спада и той ? Нямам въпросния сериен номер,който имат другите производители 10-11 цифрен ?
From where did you took the new numbers ,or you changed them random
The serial number is changed random. The number for the capacity is the corresponding capacity of the new battery.
@@pavelppp888 my problem is that i don t know if the shop ceded the new battery ,and i have this problem with rpm going at 1000 ,not 900 ,and i checked and from alternator is going out 14.3 and in the back at the bateryy is 12.4 .
Someatimes i got this management baterry code on vcds ,so i can not find the problem ,maybe is the cable because i was reading about the positive cable from a4 b8 2009 .
Or there is a charging module or idk.😑
Is the serial number the same as the BEM code?
Not as the entire BEM Code. Part of the BEM code is the serial number.
@@pavelppp888 ah okay. Is the Bem code not necessary for uds protocol?
@@arrrrr9831 nope you can just perform the steps shown in the video cheers
@@pavelppp888 great thank you.
Ive got a golf mk6 1.6 tdi 2010, do i need to code it aswell? Whats the point of coding anyways? Better battery performance?
From golf 7 onwards.
Hi will this work on 2011 audi tt?
Which model?
@@pavelppp888 tt 1.8 tfsi
hi sir where can i find the serial number of the new battery please
It have it only to the original batteries. If you bought a normal aftermarket, just change the currently stored serial number in the car to something else (for example change the last symbol) and store it that way. By doing this, the car will know that there is new battery installed.
Does i need to do adaption for a6 c6 2007 avant?
It is a little bit different. You can search for “battery adaptation non-uds” and a video from Voss Tech will show you the procedure. I have done it on my a6 c6 some years ago
Thank you! How do we save the original settings just in case?
You can take a photos or write them manually down. The adaptation channels cannot be saved in a log file like the codings, at least I don’t know a way for that to be done.
@@pavelppp888 You can save a file: VCDS - Applications - Controller Channel Map - Address 19, Adaptations, CSV file!
@@florinconstantinescu926 thank you for the information. I hope it will be helpful for others also.
If I put same battery then coding is no required ?
You should change only the serial number. That way the car will know that there is a new battery installed.
@@pavelppp888 thanks ❤️❤️
When I change de serial number ( 1 number) or all thé number for thé New serial code i havé a message ( please enter alphanumeric caracters
What language is your PC? Try with another symbol, even with a letter.
my question is vatra and VAO or VA0 (zero)
Its selectable menu, so is predefined which one it is. But if you need to write it, its always the letter O.
I have a 2007 Audi q7 will this video work?
Nope, you need the old method by coding the battery control module. Search for a6 2007 battery coding - that is the correct procedure for your vehicle.
@@pavelppp888My battery does not have a bem code or qr code?
You can use one of the codes that I show in this video to reprogram your car. It is just the module that is being reprogrammed. That is the difference.
Im getting an error while changing values "Conditions not correct or request sequence error"
Please, check the vendor ID and code in the vcds settings. You can google |vcds vendor codes" and try inputing a different one. This error can be caused due to messed up vcds settings and if the vendor id is incorrect, the procedures like coding and adaptations cannot be executed.
Love song thanks
thanks!
İm in turkey and i have turkish battery name mutlu i sellect wich one ?
You can use the Varta one.
@@pavelppp888 actualy i search in turkish forum and i found true code but thank you
I bought an *Interstate* battery at Costco, and they told me that the vendor code was *JOB.* Do you know if this is correct? Thanks!
I think there is no such one but you can use the JCB one or the VAO one.
For some reason I have CAN protocol and "adaptation" button it's not selectable... What I am I doing wrong?
Are the other options available, such as “measuring values”. It is possible that the VCDS itself it’s old or unsupported and cannot interpret the adaptations and the bottom remain unavailable