It must be awesome to have a hydraulic winch? Noticing your movements are just a continues smooth flow. If you don't have a hydraulic winch. Then your the absolute best bed hand I have ever had the pleasure of watching. Memories!!!
all hydraulic on the c500s. i haven't had a mechanical in a long tome 2008 ish at road train ran one there for 4 years until i got my first texas bed. my friend has one still and would love to take it out for a job
Well Jarrod that was tight in that yard a lot of running around for you then the weather turns to shit ,but i appreciate the time you take to video it for us 👍
i try to drift everything i drive. late one time in the bigger bed the 400 we had at cypris, i was late for a rig skid and traveling on a road i didnt know when over a crest after a long strait there was a curve, the auto with the jakes on i was like oh shit but i gave it my best and when it shifted down under jakes it kicked the ass out and steered me right perfect for the corner that had a slight bank to it. it was perfection and if the camera crew i dont have was just on the inside of that corner to catch that clip, swamper woke right at this moment too and said thats some driving right there
Lots of guys working in that one location. You are just a small piece of the giant puzzle. Is there someone who coordinates all the moves. I’m just amazed at all that’s going on. Is this the beginning or the end of drilling? Keep safety the priority. Lots of hands and lots to watch for. Keep the videos coming.
great video, it definitely was a bit of a shuffle. been on those sites in a tractor trailer plenty shipping pipe but it's a different view looking out the back of a boom truck. thanks for the video 👍
400 inch wheelbase is considered a sow, this is 360 inch, commonly referred to as a pole truck, this truck may look big but its almost small in comparison, well this one is micro, its not that beefy.
anything off road is preferred, but i do love to get out and stretch the legs and go to BC. i dont consider it long haul if its only a few days in the truck. 60% off road 40% highway, too much of one thing gets boring
yes, all the beds have flip out 5th wheels. takes a custom trailer usually, out pole truck is low but still need a 3 position scissor neck, i could but should not pull my red trailer behind a bed. its only a 2 position neck, most of tandem tandems are pretty heavy and can only carry weight on the rear of the trailer, very little weight transfer to truck
no. that would be bad, does happen, broke a sling once with a big p tank i was trying to move with my tandem t bed, but it was dragging on the ground so nothing really happened
i hear both, but no paid waiting time, a lot of can to usa i think are by the km or mile, your guys that stay in one province are more likely to get by the hour
Great video sir. You make it look easy appreciate the content
thanks, its easy after years of practice
Again thanks .
good operators make jobs look easy.
It must be awesome to have a hydraulic winch? Noticing your movements are just a continues smooth flow. If you don't have a hydraulic winch. Then your the absolute best bed hand I have ever had the pleasure of watching. Memories!!!
all hydraulic on the c500s. i haven't had a mechanical in a long tome 2008 ish at road train ran one there for 4 years until i got my first texas bed. my friend has one still and would love to take it out for a job
Great video. I had no idea that there was that much stuff to move on one job site.
This was only 60% of the work. The rig move company did all the big stuff. The inner bits and shacks. A few rentals here for sure
Well Jarrod that was tight in that yard a lot of running around for you then the weather turns to shit ,but i appreciate the time you take to video it for us 👍
this is great footage of a daily life of a drilling rig bed truck.... well half a drilling rig move
Great video! Very tight lease would be frustrating for sure and it didnt take long for the weather to go to shit.
that weather is typical. its rare i get to go out without some bull weather, the tight lease is just another challenge
Very cool. I learned a lot.
Glad it was helpful!
Good to see a real driver that can power slide a truck thats 27klbs
i try to drift everything i drive. late one time in the bigger bed the 400 we had at cypris, i was late for a rig skid and traveling on a road i didnt know when over a crest after a long strait there was a curve, the auto with the jakes on i was like oh shit but i gave it my best and when it shifted down under jakes it kicked the ass out and steered me right perfect for the corner that had a slight bank to it. it was perfection and if the camera crew i dont have was just on the inside of that corner to catch that clip, swamper woke right at this moment too and said thats some driving right there
Digging the tunes too.
thanks for that
That was a lot of action!!
that was a busy day for sure. awesome fun
Lots of guys working in that one location. You are just a small piece of the giant puzzle. Is there someone who coordinates all the moves. I’m just amazed at all that’s going on. Is this the beginning or the end of drilling? Keep safety the priority. Lots of hands and lots to watch for. Keep the videos coming.
yeah a truck push that does know most of whats going on. i just pick up and put down. on a full rig move it can be very busy
@@TimelapseTruckerRTOT thanks for the reply keep the videos coming
great video, it definitely was a bit of a shuffle. been on those sites in a tractor trailer plenty shipping pipe but it's a different view looking out the back of a boom truck. thanks for the video 👍
you bet no problem
thats a good job you have there hourerly and chilling nice be safe
I miss the ballet of the trucks on a crowded rig move conducted by the truck push.
Great video. This is the type of video i enjoy and plus the editing. Great music with background sound of the truck. This was a replay?
yes its a replay. i changed a song but for the most part original. good footage, awesome full day
Always wondered why the other bed truck was refered to as a SOW, whats the difference?
Another killer video as always! 👌
400 inch wheelbase is considered a sow, this is 360 inch, commonly referred to as a pole truck, this truck may look big but its almost small in comparison, well this one is micro, its not that beefy.
Jerrold wich you prefer . Spotting all day Or long haul
anything off road is preferred, but i do love to get out and stretch the legs and go to BC. i dont consider it long haul if its only a few days in the truck. 60% off road 40% highway, too much of one thing gets boring
Sorry for your knees, I think you always gonna need a sleeper cab or extended daycab. There is a lot of stuff in the little oilfield
i over exserted it one time working way to many hours, never been the same since, could be from multiple honda trike crashes, growing up 80s child
Jarred I was wondering can you haul a trailer with the pole truck or no
yes, all the beds have flip out 5th wheels. takes a custom trailer usually, out pole truck is low but still need a 3 position scissor neck, i could but should not pull my red trailer behind a bed. its only a 2 position neck, most of tandem tandems are pretty heavy and can only carry weight on the rear of the trailer, very little weight transfer to truck
Good video thanks be safe
nice work!!!!!!!
Did ever happend that your winch cable snapped mid pull
no. that would be bad, does happen, broke a sling once with a big p tank i was trying to move with my tandem t bed, but it was dragging on the ground so nothing really happened
10-4
If you do long haul you paid per hr or per km
i hear both, but no paid waiting time, a lot of can to usa i think are by the km or mile, your guys that stay in one province are more likely to get by the hour
Ya same here. Thanks
82 f and cleaning the pool, eat your heart out
that would be nice to come home to
😊
😎