Hey guys, I am writing this to help others who run into the same problem "Brownout ...triggered". This is caused by low voltage coming from the FTD programmer on the 3.3V rail. As a solution I switched the jumper to 5V on the FTDI and moved the wire over to the 5V pin on the ESP32-CAM. Everything works fine now!
Bhai mast hai . Lekin Bhai 1 aisa video banaye jo kisi bhi likhi hui latter ya kuchh bhi likha ho to use scanner kar ke vah bole ki kiya likha huaa hai. Bhai aisa sambhav hai to ek video banaye.
How can i control output by recognition the face?? I wanted to Say that, suppose if my face detected then it will do another work like led blink/motor running etc. Please tell or make another video using this module.... Please please please Please
I follow your instructions but for some reason it's not working. These are the errors I'm getting on the serial monitor. [E][camera.c:1049] camera_probe(): Detected camera not supported. [E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004
Cant the program connect to the wifi and web server before setting up the camera. Then we can get the ip from the serial monitor before attaching a better power supply. I've never been able to get these to work with out the camera errors and every answer that fits my problem is mostly power related.
You have to setup a router and an internal private network for cameras (with different IPs of course), then configure the router to do port forwarding, different ports to each camera's IP. But if you want to stick this contraption to the public internet, then think about security first...
Your module came with the Camera already prehooked - Mine does not. I was hoping to see how the camera could be connected. I got 2 pieces in my bag, one is the ESP32 and the other is my camera separately.
Bro what this works in same network connection or out of the network connection like I connect camera to Wi-Fi and I took that IP and put it on my phone browser and Iam using my mobile internet data then it will work....
The procedure i showed in this video will work for same wifi network You cannot see the stream through mobile data or other networks I will uploading another video for this... stay tuned
Hi Sir, thank you for your tutorials, it was great. Please, I would like to know if by inserting a memory card, the images recorded by the Esp32-cam module can be used for easy detection, or if facial recognition is limited depending on the space available to the esp32-cam , or if it is possible to store the maximum depending on the external memory add? Thank you, please answer me.
@@raulg08 I'm not sure what you mean by "a code behind it". Any processing done on the ESP32 board or out on the website is certainly done by a program, by software. Perhaps that's what you mean by "a code behind it". My question is whether the software that does the face recognition is on, and processed by, the ESP32 or it's out on the related website. It's partially a question of whether the ESP32 is powerful and fast enough to do such processing. It would be nice if an answer would be provided, along with some links to where that type of software for the ESP32 might be available.
Hi I finally got it working but I have a new problem, if the esp32cam gets disconnected it won't reconnect to the router/hotspot/network automatically and I have to reach the esp32cam and restart it by hand. What if I want to fix it in some place high? Do I really need to restart it every time? Can't it just get reconnected to the network like any other normal device? And btw can I add multiple network credentials to esp32cam code so if one is not in range it would connect to the other ones. Thanks in advance.
you wired the 3.3v pin? It doesn't work with 3.3V, only 5v. At least, I tryied to use 3.3 with a 9v=>3.3v dropdown module, with arduino, no luck. And.. face recognition does do nothing :D
Thank you very much for the explanation teacher, I loved the video, I'm a big one on the channel, but I have a question How can I view images from the camera while on another network, ex: through my 4G and I see everything that happens with esp 32 in my house that is connected to wifi
PLEASE reply , iam getting an error after pressing reset button in serial monitor "Brownout detector was triggered", tech team support from that site suggest to power the esp32 with external power to 5v using LM2596 . is this issue because of less voltage to esp32cam? i connected to 5v .
excellent project, I would like to ask a question, How can I add a 16x2 LCD so that a text appears when opening and closing the "solenoid lock"? regards🤝
You can use one of the LCD libraries and include that in the arduino code. Look up some videos on connecting it to arduino. It's only a few lines of code to accomplish what you want.
hello i have seen the video but when it comes to tools programmer i dont have these options u got i only have esptool is that fine? like will the code work or is there a fix to this issue?
☹Nice project, I just can't save anything to the SD card. Face Detection works but the face recognition works but how do I name we detected is. Regards Henk
While pressing the onboard button the LED is not blinking , I tried two boards, tried 3.3 and 5 v (on different pins), what could be wrong ? Also showing timeout error while uploading, tried two computers, tried older Arduino IDE (1.8.10).
Yes this led on board not blink at all but for the time out error check your settings in tools>partition schemes- huge......... And upload speed according to your board , if you have ESP32-S then you have to set it to 115200 and then check it.
i am not able to code it with arduino ide 1.8.19 . it is showing fd_forward.h missing when i compile it.i have not done any unnecesarry changes in code.i looked on net but nothing worked, can u please help
All good but when the IP should pop out, instead this message pops : [E][camera.c:1049] camera_probe(): Detected camera not supported. [E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004 plz help
Please I need your help, How do I put the access point in this code, I already put wifi.begin softAP and it doesn't work, what do I need to change to have AP access and have all the camera options?
I'm facing some problem after uploading program. When I open the serial monitor and pressed the reset button a dotted line counting like this"...........…............". Please help me to resolve this problem. Thank you.
I have a problem that the avr program does not appear, how can I solve this problem?? Does this have anything to do with the inability of the camera to recognize the face?
Help me bro please I have done the project before and I was going to do your car controlled esp32 cam project from that movement I am getting an error as A fatal error occurred : MD5 of file does not match data in flash
I cant use CIF its says: Please select CIF or lower resolution before enabling this feature! buts its already in CIF and in lower resolution the square of face reconigtion dont apper
Hey guys, I am writing this to help others who run into the same problem "Brownout ...triggered". This is caused by low voltage coming from the FTD programmer on the 3.3V rail. As a solution I switched the jumper to 5V on the FTDI and moved the wire over to the 5V pin on the ESP32-CAM. Everything works fine now!
Thank youuuuuuuuuuuu soooo muchhhhhhhh
If this method didn't work, try powering the card from a different unit instead of an FTDI unit (it worked for me).
Please whenever I upload the code they keep telling me that there is an error with the selected port. Either is not connected or does not exist.
@@abubakarawwal1708 change the port settings..
Well Done broo
I was crackng my head to use this
and finally i used raspberry pi with picam
Hello
How did u do it using raspberry Pi.could u plse tel me.
Thank you for being the person who finally made a video a begginer can understand
Thank you very much from Brazil.
I really admire your culture and country.
“All right Mr. DeMille, I am ready for my close-up”
Your hair so thick for a sec I thought it was a turban. Awesome work by the way.
sir,..thankyou so much for this detailed tutorial.....it is helping my project ..thankyou thankyou......
Really good bro
Excellent project. Very good video
Great video. Thanks
Bhai mast hai .
Lekin Bhai 1 aisa video banaye jo kisi bhi likhi hui latter ya kuchh bhi likha ho to use scanner kar ke vah bole ki kiya likha huaa hai.
Bhai aisa sambhav hai to ek video banaye.
How can i control output by recognition the face??
I wanted to Say that, suppose if my face detected then it will do another work like led blink/motor running etc.
Please tell or make another video using this module....
Please please please Please
whether you find that??
Can we detect a particular object
Great work
Thank you very much bro after a long video
I follow your instructions but for some reason it's not working. These are the errors I'm getting on the serial monitor. [E][camera.c:1049] camera_probe(): Detected camera not supported.
[E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004
Cant the program connect to the wifi and web server before setting up the camera. Then we can get the ip from the serial monitor before attaching a better power supply. I've never been able to get these to work with out the camera errors and every answer that fits my problem is mostly power related.
Thank you for this Video...it really help but is not detecting my face
need a little help please
What if i have more espcam modules and i wanr live feed from all of them on the same ip
Thanks for the idea bro
You have to setup a router and an internal private network for cameras (with different IPs of course), then configure the router to do port forwarding, different ports to each camera's IP.
But if you want to stick this contraption to the public internet, then think about security first...
Can we make a face recognition robot . If yes then please make it. Atleast a circuit that recognises u and says your name
The video quality in this camera module is like those old Nokia phones that first came with cameras
Good vid
Superb video thank's bro
hi viral, have you faced the video stream freezing issue on esp32 cam while trying to use face detection
You have one more subscriber.👍
Your module came with the Camera already prehooked - Mine does not.
I was hoping to see how the camera could be connected. I got 2 pieces in my bag, one is the ESP32 and the other is my camera separately.
Ossom project bro 👍
Hello VS, Under programmer it is not showing arduino ISP AVR. Please help me.
nice work!
Bro what this works in same network connection or out of the network connection like I connect camera to Wi-Fi and I took that IP and put it on my phone browser and Iam using my mobile internet data then it will work....
The procedure i showed in this video will work for same wifi network
You cannot see the stream through mobile data or other networks
I will uploading another video for this... stay tuned
@@ViralScience ok
Is there any led blinking while we connected to the power supply ?
Great work bro
Please can you make a video using esp32 to implement object detection using de1-soc?
Hi Sir, thank you for your tutorials, it was great. Please, I would like to know if by inserting a memory card, the images recorded by the Esp32-cam module can be used for easy detection, or if facial recognition is limited depending on the space available to the esp32-cam , or if it is possible to store the maximum depending on the external memory add? Thank you, please answer me.
Did you get the answer ?
Antenna free for esp32cam
Or we have to purchase seperately
hey man, tks for the tutorial! My question is: how do I get the file from the faces that it recognizes? Or how do i config this feature?
This Final Ip address will changed every time or it will remain same once for all !Plz reply
sir this video is very helpful to us , I want to recognize face with his name and some info.....can you please suggest me
Esp 32cam and Android phone same WiFi se connect hona chahiye kya
Hello Viral Science can I change the name of subject as per my wish ?
Thanks for awesome video
Is the face detection done by the ESP32 board or out on that website you linked to?
I have the same question about it
isn't there a code behind it? i don't think esp32 does face recognition by itself? or i might be wrong idk
@@raulg08 I'm not sure what you mean by "a code behind it". Any processing done on the ESP32 board or out on the website is certainly done by a program, by software. Perhaps that's what you mean by "a code behind it". My question is whether the software that does the face recognition is on, and processed by, the ESP32 or it's out on the related website. It's partially a question of whether the ESP32 is powerful and fast enough to do such processing. It would be nice if an answer would be provided, along with some links to where that type of software for the ESP32 might be available.
Bro u r great 👌
Bro make a object Detection project using the same board
Hi
I finally got it working but I have a new problem, if the esp32cam gets disconnected it won't reconnect to the router/hotspot/network automatically and I have to reach the esp32cam and restart it by hand. What if I want to fix it in some place high? Do I really need to restart it every time? Can't it just get reconnected to the network like any other normal device?
And btw can I add multiple network credentials to esp32cam code so if one is not in range it would connect to the other ones.
Thanks in advance.
Please can i do this project with arduino nano.. can i also save these video recordings into an SD card?
It takes only photo or makes video also?
enroll is not enrolling face just it is like cam only your help will be appreciated
Does it save the face IDs on power removal.
Please share.
Please make on face tracking with esp32
Very good. Congrats!
Can't find AVRISP in programs. Can you please help me..
I have the same problem, have you found a solution yet?
you wired the 3.3v pin? It doesn't work with 3.3V, only 5v. At least, I tryied to use 3.3 with a 9v=>3.3v dropdown module, with arduino, no luck.
And.. face recognition does do nothing :D
Hello!.I have successfully done this project.But how can i improve my camera output?And how to adjust the framerate?Any idea?😄
Hi bro please help me i can't recognize my face
how is the phone you are doing good quality vidio
Goodjob bro!💯✌.Keep it up💥.U are my inspirations for create my own youtube channel.Thanks well done!😉🙌
good morning bro. With this can i record videos on my mobile phone, cause i want to use it on my drone.
Could You wire it to a motion sensor so that the stream does not always have to be on.
Thank you very much for the explanation teacher, I loved the video, I'm a big one on the channel, but I have a question
How can I view images from the camera while on another network, ex: through my 4G and I see everything that happens with esp 32 in my house that is connected to wifi
PLEASE reply , iam getting an error after pressing reset button in serial monitor "Brownout detector was triggered", tech team support from that site suggest to power the esp32 with external power to 5v using LM2596 . is this issue because of less voltage to esp32cam? i connected to 5v .
Bro ur a gread scientists
excellent project, I would like to ask a question, How can I add a 16x2 LCD so that a text appears when opening and closing the "solenoid lock"? regards🤝
You can use one of the LCD libraries and include that in the arduino code. Look up some videos on connecting it to arduino. It's only a few lines of code to accomplish what you want.
I did this on raspi without lock , works great , use with i2c backpack module
Do a video on esp32 cam surveillance car
Sure
@@ViralScience thank you bro 👍👍👍👍👍👍👍👍
Can make the camera work wirelessly ?
hello i have seen the video but when it comes to tools programmer i dont have these options u got i only have esptool is that fine? like will the code work or is there a fix to this issue?
can i collaborate it with body temperature sensor? instead of showing "hello subject" it will showed what your body temperature?
☹Nice project,
I just can't save anything to the SD card. Face Detection works but the face recognition works but how do I name we detected is.
Regards Henk
While pressing the onboard button the LED is not blinking , I tried two boards, tried 3.3 and 5 v (on different pins), what could be wrong ? Also showing timeout error while uploading, tried two computers, tried older Arduino IDE (1.8.10).
Yes this led on board not blink at all but for the time out error check your settings in tools>partition schemes- huge......... And upload speed according to your board , if you have ESP32-S then you have to set it to 115200 and then check it.
did you tape your camera esp32 cam?
Great video !
Does this module has wifi and bluetooth inbuilt? Also can we access this using blynk app?
Can we use Arduino nano in place of FTDI module??
Thanks. Gréât video
Hi. Can we detect face with or without mask?
HOW have u opened this website becuase if i click the link from the description it only gives me the code
i am not able to code it with arduino ide 1.8.19 . it is showing fd_forward.h missing when i compile it.i have not done any unnecesarry changes in code.i looked on net but nothing worked, can u please help
I work it normally on 1.8.13 for your reference.
what model camera bro? mine not setting up the facial recognition
All good but when the IP should pop out, instead this message pops :
[E][camera.c:1049] camera_probe(): Detected camera not supported.
[E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004
plz help
Hey bro i have also face this problem can you solve this problem? Pls
Esp32 cam ka jo power pr wire lgai h osy 5v pr lga do or bechy sy jo module h osy be 3 ke jga 5 krdo 2no module ko 5v dna h
Latency ?? If i use it as FPV
PLZ reply
Will it suppor 10mp image sensor?
is the video stream can be put in to NVR?
Please make CCTV using esp32 cam. Which saves video in SD card and delete oldest video automatically. Please
Hey can I ask? Is it possible for the esp camera to alarm once it detects a face that is not enrolled in the camera
Please I need your help, How do I put the access point in this code, I already put wifi.begin softAP and it doesn't work, what do I need to change to have AP access and have all the camera options?
for streaming over mobile do they have to be connected to the same wifi network or it can be streamed over different networks?
To the same wifi network
Can we simulate this proteus.?? We need help
At 4.26, whether I should un comment Ai thinker model. Can I use other camera model.
I'm facing some problem after uploading program. When I open the serial monitor and pressed the reset button a dotted line counting like this"...........…............". Please help me to resolve this problem. Thank you.
Great video. Sir, how long or max distance to capture face?
may i ask is that a part of deep learning or machine learning?
Can i use arduino uno instead of ttl module for giving 5V?
Please select CIF or lower resolution before enabling this feature! How can I fix this error?
Brother, the port ain't showing? What can I do? Where can I get the USB Data cable? I didn't get it with UART TTL board.
I have a problem that the avr program does not appear, how can I solve this problem?? Does this have anything to do with the inability of the camera to recognize the face?
Help me bro please
I have done the project before and I was going to do your car controlled esp32 cam project from that movement I am getting an error as
A fatal error occurred : MD5 of file does not match data in flash
I cant use CIF its says: Please select CIF or lower resolution before enabling this feature! buts its already in CIF and in lower resolution the square of face reconigtion dont apper
Bro from where did you learn about all this stuff pls telll......btw great work
Self Learning on internet
Does it delay a lot?
I want to reinstall programming in my this esp32 cam from new point bcz some features r not working so what I need to do ?
Hello,have you considered doing a tutorial with esp32 in streaming and blynk?
I have done the same but after using serial monitor I'm getting flash err 1000,how to solve this?