One of my favorite channels for Jdm builds … people like this inspire me the most.. someday 🙏🏽😌I’ll start turning wrenches in my own shop like this can’t wait …
One of the Cleanest builds but to me i would of left the AC and not deleted it make it a real sleeper when people see the engine bay they would say oh it has AC and wont think it Hauls @$$
It's cool, don't rush it now, take your time and make it right, I'm looking forward to the hatch build too, but not that much, go over everything a few times to make sure
Man this is very impressive! If I ever get another evo 8 again this is what I want to do even if it takes 10 years! It’s like better than new! The amount of work you’re willing to do and can do is amazing! Did you go to mechanics school or learn as you go Devin? Love the channel and can’t wait to see what’s next!
My Evo mechanic always marks the torqued down bolts and the area around it with a pink permanent market for 2 reasons. To check if they unbolted and also mark the ones he's done already.
As soon as I saw you putting the tank in, I was thinking you prob should have done it before the other stuff lol but good job so far. She’s looking sick! You’ve done a killer job on this and the other cars!
After watching umpteen videos of Devin working on cars, I decided to buy tools and replace my front wheel hub and bearing nd install my coil overs, for my evo x. I could not for the life of me break loose the axle nut and gave up immediately... its now at a shop being worked on. Lol.
Devin, first of all very good work on the assembly. Did you mark the position the parts of the driveshat were assembled to put back the way it was? The driveshaft is balanced , if you assemble on a different position you may experience vibration and may need to balance it again.
It's crazy how much bushings make a difference. I had a Silverado was riding like crap put new shocks tires everything couldn't figure it out so Silverado has 8 body mounts yeah took one out it was dust put new poly's in felt like a brand new truck
Hey devin I have a question here for you. I'm working on a project with my lancer se I wanted to switch the floor shifter I purchased an evo 10 floor shifter and it comes with two connectors instead of having one connector. now I really want to use this floor shifter cause I don't like stock ones so my question is any idea on wire mapping so I an make it work. Thanks
Did u torque the main nut on the differential out put flange? Didn't see that in any of the videos. U need some kind of special tool to hold the flange when u tourqe it.
Looks Sic as, almost art, be awesome if cars came like this from the factory at same price, lol, still that was an 85k car when it was new in my country so I expect that level for that money 😂 It’s half a day, tomorrow bud, love your optimism , but you ain’t doing all that in an hour and a half, still good laugh, she gonna have be taken to car show’s after this, maybe SEMA if ya haven’t already entered here, she’s worthy of a category 🤘
i like to have one of your guys's air fresheners to put in my car i got a lancer GT that i'm trying to build up to make it look like an EVO i've got the hood a carbon fiber hood for it and everything else so i like to put your air freshener in there and tell me how much they are and how i give you the money to get one appreciate it guys i like love watching your videos
The fact that he does it by himself is insane
Another reason why I have SO much Respect for this mans!
+ filming in the process.
One of my favorite channels for Jdm builds … people like this inspire me the most.. someday 🙏🏽😌I’ll start turning wrenches in my own shop like this can’t wait …
This Evo is on a whole other level! Everyone always talking about @TommyFyeah and his clean builds… Devins got your number homie 😈👊🔥💯
One of the Cleanest builds but to me i would of left the AC and not deleted it make it a real sleeper when people see the engine bay they would say oh it has AC and wont think it Hauls @$$
@@irvingtorres5316 a/c is so nice I’ll still have it at 1000whp lol
And the young man does it DIY stylez..... No 100K dry ice machines etc
Hey Devin, did you ever set the preload on the pinion gear for the rear differential? Don’t wanna see it shred apart after all the work you just did.
I hope he did.....if not at least see this comment.
Your comment is the reason why devin didn't put it all back together this time 😊👌🏼
The evo 8 had an absolutely wonderful suspension setup in the rear! Looks really nice to work on!
I am beginning to think this hyper blue evo8 is starting to be a sema build it’s gonna be one hell of a clean project when it’s all finished up 💯🇺🇸
It's cool, don't rush it now, take your time and make it right, I'm looking forward to the hatch build too, but not that much, go over everything a few times to make sure
I’m sure it can get tough but I’m glad your so consistent with your vids ✊🏾✊🏾
she's gonna drive like a dream now😍
Everything about that car is moving along just brilliantly, good job bro
Keep up the amazing work, love too see when you post!!
Man this is very impressive! If I ever get another evo 8 again this is what I want to do even if it takes 10 years! It’s like better than new! The amount of work you’re willing to do and can do is amazing! Did you go to mechanics school or learn as you go Devin? Love the channel and can’t wait to see what’s next!
I’m guessing you’re relatively new?
@@antoinewilliams129 🤷♂️🤷♂️🤷♂️
Can't wait to see the Evo finished!!
My Evo mechanic always marks the torqued down bolts and the area around it with a pink permanent market for 2 reasons. To check if they unbolted and also mark the ones he's done already.
As soon as I saw you putting the tank in, I was thinking you prob should have done it before the other stuff lol but good job so far. She’s looking sick! You’ve done a killer job on this and the other cars!
you're the best man.. ! this evo look more new than a brand new lol !! this Hyper Blue Evo make me dream....
After watching umpteen videos of Devin working on cars, I decided to buy tools and replace my front wheel hub and bearing nd install my coil overs, for my evo x. I could not for the life of me break loose the axle nut and gave up immediately... its now at a shop being worked on. Lol.
These videos mean such a lot to me. Thank you!
I appreciate the daily vlogs cause you give me something interesting to watch
Facts wouldn’t mind if they were a little longer tho 😂😂
Devin, first of all very good work on the assembly. Did you mark the position the parts of the driveshat were assembled to put back the way it was? The driveshaft is balanced , if you assemble on a different position you may experience vibration and may need to balance it again.
Très belle restauration que tu fait sur la Evo !
Dude ASMR af such a sick Evo. Devins the Evo guy
Looking good Devin. Remember those intercooler piping.
I know that car gonna drive like a dream for sure 💯💯💯
This is the Evo is about to be considered a restoration build . And it’s almost done ✅
Sick job so clean! 🦾✨✨✨✨
she's brand new 😁
Evo so fresh, it look like it just came out the Mitsubishi assemle line with all the aftermarket options.
All the newbies Devin, doesn't make trailer princess all these cars Rip the 509🤘
that looks minty fresh. good work
It's crazy how much bushings make a difference. I had a Silverado was riding like crap put new shocks tires everything couldn't figure it out so Silverado has 8 body mounts yeah took one out it was dust put new poly's in felt like a brand new truck
Sick transformation! The underside never looked so good.
Cleanest builds on YT atm bro keep it up💯🔥🤙🤙
Hard work pays off
Absolute killer job dude🤘🏻🤘🏻🤜🏻🤛🏻
It is looking better than i thought.
I missed those vids i didn’t had time to watch even TH-cam Greetings from Germany ❤️ ps love your videos
Man U look so much happier as soon as you bought the supra
can't wait for a mountain run with the exhaust note of this Evo
Anyone else think he brought out minecraft music @3:22 ?
Hey devin I have a question here for you. I'm working on a project with my lancer se I wanted to switch the floor shifter I purchased an evo 10 floor shifter and it comes with two connectors instead of having one connector. now I really want to use this floor shifter cause I don't like stock ones so my question is any idea on wire mapping so I an make it work.
Thanks
Devin can you do this to the subi hatch? that would be amazing to see!
My favorite TH-cam channel 😁 big 👍
super clean 👊
If there’s a will theres a way. Always good content!!
Beautiful work 👌👌
I’m pretty sure Devin was good at building Legos when he was a kid
Did you end up tighten the diff front plate to driveshaft? And replacing that seal or watever you had to do to leave it loose?
Wonder how hard it is to pick what car he drives each day I wish I had that problem
Did you eventually torque down the diff nut?
Last step in the project is devin placing the evo 8 in a swimming pool and filling it up with epoxy resin lol. it's becoming a masterpiece!
@Lord Humungous Yeah exactly, it will be a dioramas lol
Did u torque the main nut on the differential out put flange? Didn't see that in any of the videos. U need some kind of special tool to hold the flange when u tourqe it.
Need to see the mrs with the matching yoga outfit again ;)
Looks Sic as, almost art, be awesome if cars came like this from the factory at same price, lol, still that was an 85k car when it was new in my country so I expect that level for that money 😂
It’s half a day, tomorrow bud, love your optimism , but you ain’t doing all that in an hour and a half, still good laugh, she gonna have be taken to car show’s after this, maybe SEMA if ya haven’t already entered here, she’s worthy of a category 🤘
You should put lock tight on the driveshaft bolts
damn new mic?, came in clean af on the opening lmao
beautiful!
Clean my guy!
Yess back with another day of very interesting video hope everyone here will enjoy this video 💯👌🏻🇺🇸
Thank you bro
When those bolts go missing after getting them done, theres no way to get them back?
Your a beast Devin
7:57 getting a little too paranormal activity for my liking 👻
FRESH! ✨ ✨ ✨
Yeap. Still waiting for the evo 9 build. 🥲
So good.
Devin I suggest for you to try rigid collars
Never clicked so fast
I thought you were suppose to torque down bolts that go through bushing after the car is under load?
He said that
Do you use alldata or anything like that??
No winder bobby is always happy...
Where did u get ABS sensor ?
🔥🔥🔥👍
Bulid my supra bro💨💨
Did you torque your diff nut?
Soooo cleeeean 🧼🔥🧼
🔥💯👌🏽
I’m pretty sure those drive line bolts need Locktite
Love your vids can’t wait for the subiee I have one of my own and there so much fun
where to buy abs sensor? Pls.
Rear shocker?
Love your videos
🤙🏻🔰
Hi love your evos man that's my dream car
😎💪🏻
I'm so jelous. I need to do the underbody of mine now.
Lmk when you're hiring i'll drive the built hatchie there ;)
Should do a v8 swap on the old black evo
Sheesh
good content.
still can't believe you got a supra lol
i like to have one of your guys's air fresheners to put in my car i got a lancer GT that i'm trying to build up to make it look like an EVO i've got the hood a carbon fiber hood for it and everything else so i like to put your air freshener in there and tell me how much they are and how i give you the money to get one appreciate it guys i like love watching your videos
😂 fucking dope just rolled with Bobby or you devin blue rs 💙
Should wear a thick jacket so if something dose happen your protected 🤔
Torque everything Bro
I rate ur hyper blue evo sexy as. Keep up the motivation.. I’m all ways a evo fan.. but I have mazdaspeed
Should of called the shop and asked them if they have your missing hardware
anyone missing the long sweet videos?
Tomei exhaust
Notification gang.