How to run a servo motor without Arduino
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Servo motor is two types - one is rotating about 0-180 degree & another one is rotating 0-360 degree.For a perfect stop you need a Arduino .
Here I am showing how to run your servo motor without
Arduino .
At first you have open the servo motor.Then you will see
the motor is connected with ic & three wires is connected
to the ic.
You have to cut all the wires & connected two wires ddirected with the motor.
In this way you can run your servo motor without Arduino
You are actually using just a dc motor not a servo , Cause you completely ruined the feedback circuit !!!!!!!!!!
That's not the way bro !!!
Do we get the same torque?
No... Torque will change according with your power supply
It's not a servo motor anymore though. Just a normal dc motor
Why did you directly remove the resistor and variable resistor connection in the servo motor. The way you connected is no different from connecting a dc motor to battery with fixed 180 degree joints
Very helpful and explained very clearly thanks
please subscribe to my channel for more videos
Boss
Hi
Camera ta zoom kore dekha tohole valo bujja jabe
I will try my best in my next video
Plzzzzzz reply me as soon as possible
Uncle aapne tho mera saal bana diya THANK YOU BOSS
Thankyou so much for everything you did♥️♥️ A real burden has been lifted♥️
Does the rpm of motor increases after this
If you apply more voltage then rpm also increase . You can control rpm by using a potentiometer
@@bongtechguide3732 I am making a ranging boom for more torque ...Will it affect the torque because ...The servo I have is (MG996 R )
Does the servo still keep locked position like a regular servo, or now behaves more like a basic motor and spins by hand freely?
It will behave like a normal servo if u apply 3.3 to 5 volt.
And hit the subscribe button for never mis any update.
thank you bhai this really helped us🤌🏻🤌🏻🤌🏻
Thank you very much for sharing your knowledge Bong. Greetings from Perú
Hello boss Can you make application to contrôle sevo motor ?
very helpful, thank you
pls subscribe my TH-cam channel
cool dude ,thank you!
wellcome bro...and please subscribe to my channel
You made my day bro, thanks :)
What if motor completes 180 turn and power is not disconnected?
It will stop
Helpful video, I'll have to try it and put a stop switch (micro switch) to stop it. Hard to understand you with the annoying music.
Sorry for that ... but pls give a like & hit the subscribe button for support my effort
How to move servo motors in one direction
Can I take out the yellow wire from the motor and
Can I take out the black color from which you are connecting the motor wire to the battery (the black color connecting plastic at the tip of the wire to connect with the battery )
Yellow wire is for signalling. Black & red wire for supply voltage..u have to connect red & black wire directly with the motor as I show in my video
After doing so the motor will rotates 180° or 360°
If your servo is 180' then it will rotate 180'..If it is 360' then it will rotate 360'
Thanks a lot Sir.
Ohhhh good
Thanks
When it work normal motor so why we bought a survo motor, why we not bought a simple motor, that prize low than survo motor??
I know it very well..many people have problem to run servo without Arduino. This video for them..not for you...
@@bongtechguide3732 yes, you are right not for elders only for child🙏
That's why you did not write the correct spell of "servo"
it's a very small mistake that you done with your own video over "servo motor"
Am not troll you but i say you that video was not educational
Anyway, i repeat that
"Am not trolling you"
Please Subscribe to my channel for more interesting videos
Can we connect this micro servo motor to 24v DC plc
no...
Great work thanks.
Can you please make a video TowerPro MG995 Metal Gear Servo Motor without arduino or else have to follow same procedure shown in this video reply me if possible.
You need to follow the same procedure for metal servo also
@@bongtechguide3732 thank you for reply
For towerpro mg995 metal gear servo motor can we use 5v chargers instead of 9v batteries or else any recommendations from your side.
9 volt is required for best output
Thank you sir
Sweet wire cutters
I need ur help...how can i contact with u...from wb
mail me in pabitrakumarghorai25@gmail.com
good vi
Thanks
Buy a decent screw driver
I prefer Tandoori. Can you make please?
thanks man I got my problem solved👍
Please subscribe to my channel for more videos