DIY 3D FILAMENT DRYER || FILAMENT DRYER (home made sample)
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- HELLO GUYS
WELCOME BACK AGAIN
In this video you will see HOW TO DRY YOUR 3D FILAMENT INSTANTLY WHEN PRINT IS GOING ON
I hope this method will sutable for drying PLA and ABS materials
"You personally need to test and find by your own , wether this drying method is sutable for you or not"
THIS VIDEO IS JUST FOR REFERENCE MODEL
DISCLAIMER : - YOU ARE DOING THIS PROJECT AT YOUR OWN RISK, ANY DAMAGE FOR YOUR EQUIPMENT WHEN DOING IS NOT RESPONSIBLE FOR US
PARTS LIST :-
1) BREADBOARD _1pcs
2) MK8 EXTRUDER HOTEND _1pcs
3) M6 NUT _6pcs
4) ARDUINO _1pcs
5) V6 HEATSINK _2pcs
6) V6 THROAT (ID 4mm)_2pcs
7) PC4-01 (NEW) _1pcs
PC4-01 (OLD) _1pcs
8) PTFE TUBE (OD 4MM)
9) ROTORY ENCODER _1pcs
10) LCD DISPLAY(20X4) _1pcs
11) 10UF ELECTROLATIC CAPACITOR _1pcs
12) LED 5MM _1pcs
13) 10K 1/2WATT RESISTOR _1pcs
14) 470R 1/2WATT RESISTOR _1pcs
15) 1K 1/4 WATT RESISTOR _2pcs
16) 4.7K 1/4WATT RESISTOR _1pcs
17) NTC100K THERMISTOR _1pcs
18) JUMPER WIRES
19) IRFZ44 MOSFET _1pcs
20) 5V POWER SUPPLY
21) 24V 15AMP POWER SUPPLY
PROJECT FULL DETAILS:-
drive.google.c...
THANKS FOR WATCHING
LIKE
SHARE
&
SUBSCRIBE 🔔
Hi, all work 100% thanks
Welcome 👍
Hi very nice concept , it may solve lots of filament problems, only problem is on the code, does not upload, error on line 10, can you try to fix this? I will appreciate, thanks
👌👌👌👌👍👍👍👏👏👏🥰
I'd like to see it tested. I'm wondering how the moisture escapes. It is trapped with the filament in the heat block and heat sinks. . Is there enough space at the ends for it to escape?
@@ChipLinck its just a 15cm length approximately, so no problem, with this i won't confirm that the filament is 100% dry, but you can reduce moisture and filament brakes while printing and inline filament dryer saves drying time