Wall-Hanging Flower Vase Part2: Making plaster mold out of original shape
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- For part 1, I made the original shape in the Live which link is below:
• 工房LIVE#27 壁掛け花入れを作る
This time, I made plaster mold based on the original clay
Next time: With the plaster mold, I'm going to make hangin wall flower vase.
Assistant : Mika Akahori / 3o_ceramics
----------------------------
橋本忍 Shinobu Hashimoto
HP: hashimotoshinob...
blog: tenstone.exblo...
fb: / shinobuceramic
twitter: / h_shinobu
Ig: / shinobu.hashimoto
【Original Ceramic Tool on Sale】tenstone.theba...
：Shooting Equipment：
Camera ：
SONY α6400 amzn.to/3wkMXxB
SONY ZV-1 amzn.to/35TVk6X
DJI OSMO POCKET amzn.to/2UcgA3Q
Canon EOS Kiss X8i amzn.to/2U2wsXD
Lens ：
Canon 単焦点レンズ EF50mm F1.8 STM amzn.to/2TVprHK
SIGMA 16mm F1.4 DC DN amzn.to/3dvObNM
SIGMA 30mm F1.4 DC DN amzn.to/3dpqGpE
Mic：
SONY コンデンサーマイク ECM-PC60 amzn.to/2U60nxd
Alvoxcon ワイヤレスマイク amzn.to/2Vt6r2Z
ATEM Mini Pro tinyurl.com/y5...
Thanks for sharing. The way you fix the wood forms are just so practical. Can't wait to try.
早速のアップありがとうございます！
私は石膏型から粘土を外す際、せっかちで焦ってしまい、少し欠けてしまう事もあります。
仕事は慎重に丁寧に、ですね。
次の動画も楽しみにしています。
次回の
いつもポイントになることを含め、見て解りやすい動画に感謝しています。
道具も真似したくなる様な物ばかり、本当に勉強になります。
ありがとうございました。
続きが楽しみです♪
your voice is so calming and the furniture You are making is realy good
PLEASE ADD SUBTITLES in English to all of your videos. I would be so very grateful. Thank you!
This is a summary:
Place the unfired clay original onto the clear plastic mat. Set up the wooden slats around it as shown, taping them to the mat with strong tape to secure them in place. Seal the edges and corners by pressing in oil based modelling clay to make them watertight. Smooth the edges of the modelling clay with your finger, dipped in water.
To calculate how much plaster is needed, measure the volume of the area to be filled - length x width x height (height needs to be enough to cover the clay original but you don't have to fill the wood all the way to the top). The volume in cubic centimetres is how much plaster powder you need: 1 cubic cm = 1 gram of plaster powder. The water to be added is 74% ratio of the plaster, eg for every 100g plaster powder = 74ml of water. But obviously check your own brand of plaster. Sift the plaster little by little into the cold water and mix gently with the wooden pin for about 3 minutes. Gently pour it into the area via the wooden pin as shown and leave it to harden for at least 20-30 minutes (it took about 1 hour in this video).
Release the plaster mould from the wooden slats as shown. Use a tool to pick out the clay to start with until you can pull it out cleanly in one piece. Tidy up the edges of the plaster mould with some sandpaper and clean off any excess clay with a damp sponge. Next video he will show us how to use the mould to make a flower vase.
Use closed captioning.
PLEASE, MR HASHIMOTO , How long did it take you to learn your trade as a potter ?
Merci et Bonjour de France!