WOODEN SWIMMING POOL # BASEN DREWNIANY # ДЕРЕВЯННЫЙ БАССЕЙН

Film przedstawia proces powstania basenu z drewna.
The film presents the process of creating a wooden pool.
В фильме представлен процесс создания деревянного бассейна.

[@richardtheisen6456]

Very nice but what's even better is, you take the time to answer people's questions.
I had a 24 foot above ground pool installed 23 years ago.
I figured it might last 5 years or so.
I've had to charge the liner once, in 23 years, and the pump motor.
The memories the pool created with kids, grandkids, nieces and nephews over those 23 is priceless for both them and my wife and I.
Now the pool gets used mostly by my dogs.
I paid $6000 all in for excavation, installation, and electrical (buried lines).
That's $260 per year, plus maintenance and chemicals.
Today's lumber prices would make your pool expensive.
But it's a beautiful job

[@ssgveight]

Looks fantastic. The concrete foundation is an awesome way to stabilize the entire project and keep it looking and working great. I would definitely do the same if I was to build something like this. Beautiful job.

[@LoriannSmithsanpell]

That is a seriously beautiful pool! I absolutely love the look of it. It is the first pool that I can honestly say adds to the beauty of the property.

[@physiques]

AMAZING!!! I never thought of building a pool from wood but it's now on my to do list. I just completed a beautiful cabana in my yard and was planning to put up a pool. I'm so glad I saw this before doing so, I think a wood build pool stained the same color as my cabana would look incredible! Thank you so much for posting your build but even more for being so kind and replying to those with questions. A+ Job A+ Guy 👍🙏

[@MS-pd6rm]

Thank you for the kind words.
If you have any questions, write to [e-mail]
best regards

[@physiques]

@@MS-pd6rm Thank you so much, if I do I promise to keep them short ;)

[@stickandstring63]

Wow 9 minutes,, It would have taken me twice that long..you are a true craftsman my friend

[@MS-pd6rm]

Thank You :)

[@rebeccamcalindon5217]

Was never a big fan of raised pools before but I think they are a good idea really because it means if you come home from the pub drunk and walk through your garden to the door you aren't gonna just fall in.

[@anidaniprivate]

amazing touché with not that much work invested!

[@bobclarke1815]

Pure genious. The best build i`ve ever seen.

[@TESSA_777_]

Огонь! 👍

[@sticky59]

Fabulous work.

[@dannyarcher]

Drainage? Bottom drain? Etc
Looks amazing though.

[@rogerkocemba2942]

looks beautiful!

[@MS-pd6rm]

Thanks :)

[@guzman9011]

That’s a beautiful pool

[@mdolphins4779]

Beautiful pool.

[@MS-pd6rm]

Thanks :)

[@JuanReyes-zn4nu]

Excelente. Saludos desde México

[@Rynasancemediagroup]

I absolutely love this, great job! You’ve inspired me, I’m going to try it, thanks for posting!!!

[@MS-pd6rm]

Thanks. If you do, show the photos :)

[@MS-pd6rm]

Thanks :)

[@kellywilliams1804]

Incredible ingenuity and craftsmanship bravo

[@MS-pd6rm]

Thanks

[@kenkodes]

Très beau travail, félicitation !

[@MS-pd6rm]

Merci beaucoup

[@skrapenpennies9947]

Nice. You inspired me to build one like this

[@mariusgabrielcurelea2722]

Looks fantastic. Great job!

[@MS-pd6rm]

Thanks

[@RicardoMartinez-qq8vu]

This looks GREAT! Do you have the blueprints anywhere? My wife and I want to do this as a DIY project. I get lost on what you used as a bolt the support system beams to the ground.

[@camping13]

🇲🇦 hello, Good luck to you, support my CN, tks 😚

[@kryspy5682]

Really outstanding work with a beautiful result ! What is the thickness of the wall planks ? Thanks.

[@jlacson74]

Looks elegant.

[@MS-pd6rm]

Thanks :)

[@josmirgomez7093]

loved it!! we have just decided to make one ourselves but I'm wondering what's the name of the white and blue tarps that you used inside the pool if you don't mind.

[@vivaavida8271]

perfeição !

[@tyrone234869]

Great job, well done 👍🏻

[@MS-pd6rm]

Thanks :)

[@latashamcmillerandfamily8771]

Good work!

[@MS-pd6rm]

Thanks :)

[@markdenney8799]

FANTASTIC job! May I ask what did you do with the bolts that were used to hold the 4x4 posts? They can't still be in there to step on right?

[@MS-pd6rm]

At the bottom of the pool there is a hard polystyrene that covers the screws

[@explorster]

That is badass, you the man 😎

[@MS-pd6rm]

Thanks

[@Hammer2020]

WoW!!!!!
Klasse....Wahnsinnig viel arbeit reingesteckt.....RESPEKT....sieht sehr schön aus ein Unikat 👍
Grüsse aus Deutschland

[@MS-pd6rm]

Vielen Dank

[@antoniocarlospereira3538]

BOM TRABALHO AMIGO PARABENS GOSTEI

[@MS-pd6rm]

Muito obrigado

[@kape46]

Bonita piscina para o meu quintal/Jardim

[@Sasklahoma]

This is stunning. I noticed you reinforced the outside bottom of the pool. What did you use?
As well how did you deal with the inset bolts on the inside of the pool that hold the 4x4 uprights in place? They would need to be padded or covered to keep from puncturing the liner but I didn’t see in the video if there was a second concrete pour inside to cover them? Again stunning work.

[@Steve-hh8tg]

I was wondering the same thing!

[@MS-pd6rm]

I put 2 cm thick hard polystyrene on the screws. I cut holes for the screws and one more layer of 1cm hard polystyrene for that

[@deborahmorgan8129]

This is gorgeous! Do you have actual design plans for this pool? Can you share your plans? It is truly beautiful 🌞

[@MS-pd6rm]

Thank you for your kind words, unfortunately I don't have any plans. I did everything out of my head :)

[@ivorygilyard2243]

Thank you for the video. You did a great job. :)

[@MS-pd6rm]

Thanks :)

[@ivorygilyard2243]

@@MS-pd6rm can I ask please, what kind of wood did you use?

[@natasajavnik2234]

Great!

[@carmenbarrow1841]

Best DIY pool I've seen so far👍😁

[@MS-pd6rm]

Thanks :)

[@chrisbrooks6054]

​@@MS-pd6rmWOW BEAUTIFUL. What's size is this.

[@coryr6359]

Do you have any more content showing the liner installation? that would be SUPER helpful. Looks amazing. thanks

[@v.davinatiger7974]

excelente gracias

[@MS-pd6rm]

Gracias

[@kayhoughton3856]

Beautiful looking pool did you use cedar xx

[@MS-pd6rm]

Thank you :) The wood I used was spruce.

[@maria.luisa.garcia2169]

😁😄❤❤👍👍👍🌹
De madera ! 🤗

[@debbiemankelow6996]

Could you fix the posts in the ground with post cement. We want to install over an old driveway which is now a surface of hardcore and grade one overlayed with paying slabs.

[@ukasztelecki7934]

Best ever.

[@MS-pd6rm]

Thanks

[@cw7576]

Super!!!

[@user-nr7jj4cv5v]

бля пацаны просто завидую чистой завистью унас цены на материал подняли так что наверное трусы пойдем продовать свои последние

[@st4r336]

This is so cool and creative I really like pools and Swimming, underrated :) but how deep is it?

[@MS-pd6rm]

Thank you for the kind words. The water depth is 1.2 meters

[@mynameisbond711]

@@MS-pd6rm It is a great project, do you have a link where you bought all the accessories for your pool? If it is not too much trouble, will you have the exact measurements? I leave you a👍

[@TeleGuard-SwisscowsFan-xm7hs]

Super Idee

[@HasanHasan-lo1nm]

Super

[@billmart6334]

All of the sudden the interior of the pool appears white, I assume its the linen or the fiber to hold the water; I would like to know how you did it since its no shown in the video. I bit of explanation would clarify the time lapse on the issue.
Beyond that, as a new way to build pools its really wonderful method. I'm thinking to build one for my kids.

[@MS-pd6rm]

Hi
The white material is the base for the pool foil. I bought pool liners in rolls and glued them with PVC glue. The pool is now 3 years old and there are no problems with it. I recommend :)

[@ferenckiss2764]

Szuper meg kell csinálnom hamar :)

[@martydaggett5540]

Is there anyway I can get the plans for this. I'd like to build one for my family

[@MS-pd6rm]

Hi
I'm sorry but I have no plans, I calculated everything in my head and changed it on a regular basis

[@jay-sc3gy]

How thick was your concrete? And how many bags did it take?

[@g.king.]

very nice, I might do it in Canada, what liner did you use ?

[@MS-pd6rm]

Hi. I made the liner myself, bought a pool foil and glued with PVC glue

[@cowboyredneck7739]

where did you get the pump and there is no drain in the bottom? so how did you plumb pool to get correct circulation?

[@MS-pd6rm]

Hi, I used a sand pump. There is no drain on the ground.

[@TheJosip1000]

Is that decking wood planks you used for the sides ?

[@fedelombardi6676]

Well done

[@olicar7872]

Very nice video.

[@MS-pd6rm]

Thanks

[@frankenstein3163]

Very nice. Is it hard to keep clean ?

[@MS-pd6rm]

not with the right chemistry. I clean it every week

[@andrewstafford-jones4291]

Hi M#S I am building a similar pool at 5m x 10m with 150mm foam insulation in the walls & floor and wondered if you could help?
Did you have any problem with the top of the walls flexing with wave action in the Pool? as my pool will be 10m long any flexing will be exacerbated.
Did you make the liner undersize to stretch it into place? Did you use a vacuum pump?
Have you had any rot problems at the base? - I saw you applied a dpc to the bottom plank , but I am going to raise the base timbers by 50mm to get them away from the water but this obviously increases the bending force on the walls as the bracket moves away from the bending point.
Has one skimmer been enough to keep the surface clear without the water inlet being opposite the skimmer?
Sorry for so many questions, your pool looks lovely, well done to you all.

[@MS-pd6rm]

Hi
My pool is 4x3m in the center, and with a full pool, the deviation of the longer walls does not exceed 10mm, with large waves it feels like a gentle movement of the wall but does not bend any more. I am now 3 years old by the pool and nothing is happening to it. Next year I will only change the top rim to BSH wood, i.e. glued wood to make it more stiff.
For a 10m pool, I would use metal brackets embedded in concrete and covered with wood, and of course thicker boards. I think about 6 cm.
I made the pool foil about 5 mm smaller than the pool after flooding, the water tightened and there is no fold on it.
For your pool, I would recommend two skimmers and a sand pump with a capacity of about 12,000 liters per hour
After three years of use, I did not notice any signs of rotting (I used an OSMO impregnation)
If you have any questions, please write :)
best regards

[@andrewstafford-jones4291]

@@MS-pd6rm Many thanks for your help. I am surprised you get so little movement with the waves.
As you suggested I will use welded metal for the uprights to increse the stiffness.
I will let you know how it goes.
Yet again, thanks for the reply.

[@djkittycat1525]

This is amazing. How much did it cost in materials? About how long did the project take? And where did you buy the pool liner?

[@MS-pd6rm]

Hello
The materials cost about 2,100 euros, 2,400 $, 1,850 pounds.
The project lasted about two weeks.
I bought the liner at www.wszystkodobasenow.pl/folia-basenowa
Greetings :)

[@fabiangalan8377]

Amazing job

[@MS-pd6rm]

@@fabiangalan8377 thanks

[@olassurfingtechnologies4985]

Great beautiful pool, and inspiring! Question... How do you get into the pool do you have a staircase inside that is not shown on the video or just climb the outside stairs and the sit on the bench turn 180 degrees and throw yourself in the pool? To me an inner stair takes space from the pool but for elders it might be more confortable... Thanks for this project and your answer!

[@MS-pd6rm]

Hello
There are no stairs in the pool. In the water, the man is lighter and it is no problem to jump and sit on the edge of the pool. Then just turn around and go down the stairs :). My mother-in-law is over 60 years old and is 160cm tall and she has no problem :)

[@petefleming1085]

Looks good then what's it like now? I'm interested in doing this but not sure it will last?

[@simplykassi]

What are the dimensions you used? Are you able to fit at least 10 people comfortably? LOVEEEE YOUR DESIGN

[@MS-pd6rm]

Hi. internal dimensions are 3m x 4m water height 1.2m.

[@pepebarraza8974]

Very nice, what's the internal materials?

[@roopraiconstruction3895]

very nice

[@hunghuong6787]

Good

[@rocketman3776]

Then you Rapture Line the top rail so it makes it water proof permanently and you don’t have to worry about staining the pool liner by mistake....

[@joezen1693]

I have no idea what that means but it sounds pro and logical so I'm gonna Google it.

[@user-rv2ev5dh7r]

Не прошло и пол года и не ушло в 10 раз больше ресурсов чем на каркасный ))) Я просто яму в земле экскаватором выкопал набирается вода вместе с распланировкой того песка что выкопали по участку в 10 сот за 4 часа 8р всего и басейн и отсыпка )))

[@smakovanie7635]

Bardzo dobry pomysł, ale jakiego kleju użyłeś do połączenia foli basenowej ?

[@MS-pd6rm]

Hej użyłem kleju do plandek PCV trzyma rewelacyjnie.

[@smakovanie7635]

@@MS-pd6rm Dziękuję i pozdrawiam👍

[@smakovanie7635]

Bardzo ładny basen👍, z jakiego to gatunku drzewa ?

[@francolitto4749]

I love it

[@MS-pd6rm]

Thanks :)

[@nandorgyurasevity4502]

Cool 😎! Dimension?

[@user-cb2wm4lu3u]

Wow

[@marcelkemper1089]

Nice work. Do you have the Material costs roundabout?

[@anamartinez5987]

What was used as the liner and how did you get the filtration through?

[@MS-pd6rm]

I used pool liner as a liner. For filtration I used a sand filter and a pump of 7600 liters per hour.

[@Aniol363]

Witam. Pod płytę jakaś podbudowa z kamienia była robiona ? Jaka grubość wylewki?? Jaki wymiar basenu?? Dzięki za odpowiedź pozdrawiam

[@MS-pd6rm]

Witam
Pod płytę był wysypany żółty kamień podsypkowy i zawibrowały. Grubość wylewki Ok 20cm. Pozdrawiam

[@MS-pd6rm]

Wymiar 4x3x1.2 to wymiar wewnętrzny (lustra wody)

[@maryhigginbotham7286]

How thick was the concrete? Do you have maybe a how to so we can follow and try to do the same here in the USA? Thanks.

[@MS-pd6rm]

beton ma grubość ok 20 cm. Podłoże pod betonem jest utwardzone.

[@maryhigginbotham7286]

@@MS-pd6rm translate to English please thanks

[@MS-pd6rm]

Sorry, I don't know what I was thinking about when I wrote it to you in Polish :)
concrete has a thickness of about 20 cm. The ground under the concrete is hardened

[@leftman10]

Witam, Czym zabezpieczane bylo drewno? Czy trzeba powtarzac ten proces kazdego roku? Jezeli tak, to czy mocno trzeba szlifowac drewno? Z gory dziekuje i pozdrawiam.

[@MS-pd6rm]

Witam Basen mam 4 rok i dopiero w przyszłym roku będę go malował ponownie - jeśli dobry impregnat (ja mam osmo) to raz na 5 lat starczy. lekki szlif i nowa warstwa

[@anetafilipiak3411]

Robi duuuże wrażenie.
Czym jest wyłożony basen, to jest jakaś folia na zamówienie?

[@MS-pd6rm]

Cześć folię kupiłem w rolce i kleiłem sam.

[@TheMTalma]

@@MS-pd6rm Jak ją kleiłeś?

[@MS-pd6rm]

@@TheMTalma na klej PVC

[@MD-ij6vr]

Witaj. Bardzo ładne wykonanie :) Mam pytanie jakich desek użyłeś do budowy.
Pozdrawiam

[@MS-pd6rm]

Hej. Chodzi Ci o materiał czy deski profilowane na sciany ?

[@MD-ij6vr]

@@MS-pd6rm jakie deski uzyłeś bo wygladają na bardzo solidne

[@MS-pd6rm]

@@MD-ij6vr deska użyta na ściany to balik profilowany na podwójny pióro wpust o grubości 40mm i wysokości 146mm, słupki to kvh 100mmx100mm całość to drewno świerkowe

[@MD-ij6vr]

@@MS-pd6rm dziękuję pięknie ;) super to wygląda :)

[@marikabrowne6876]

This is so nice. Do you sell the plans for this? I would like to purchase.

[@shinigamilee5915]

Do you know why I don't have a pool?
Because it costs 1500 a month just to heat up and clean it.

[@claystone7729]

Beautiful work you did a Great Job I would like to build the same one in my back yard same size. What kind of liner did you use?

[@MS-pd6rm]

Thank you. I bought pool foil in rolls and glued it myself with PVC glue

[@claystone7729]

Thank you, I like the tongue and groove sides and plates for the posts. I try to have a project or two each year. This year was building a Deck off my house next spring will be a Porch and perhaps I will get around to a Pool too. Thank you again excellent work.

[@gregorycherestal7096]

That looks Great!!! How much did all of that Cost?

[@MS-pd6rm]

about 3 thousand dollars

[@TheJenniferPequeno]

For the pool and wood?

[@piotrszmyt3872]

Chętnie pogadam o współpracy ale za rok. Teraz dopiero dom powstaje.

[@MS-pd6rm]

czekam :)

[@federicobalbi9715]

Donde consigo esa lona que utilizaste?

[@marinomusa3993]

What is the blue cover on the side of the pools ?

[@johnm8961]

Why are fish ponds missed labeled as swimming pools? Looks nice but I can’t see how the swimming part would work.

[@markovazic6753]

jaka jest grubość drewnianych desek?What is the thickness of the wooden beam?dzięki,thanks,hvala.

[@MS-pd6rm]

Witam
Grubość desek to 40 mm

[@andreasilverberg2891]

Can you come to Florida and make me one 😀

[@MS-pd6rm]

Book a ticket :)

[@andreasilverberg2891]

M#S deal!!

[@terryshark9338]

With concrete work looks way more expensive than buying a store bought pool

[@physiques]

1- You get what you pay for... 2- Store bought pools don't look like a piece of art that will continue to look like new year after year with little more than a coat stain/wood preserver. And 3. I do believe it could be built without pouring an entire slab, though for the little extra money I know I would.

[@benhailey3611]

Concrete is only about $120 or so a yard, 2 yards would make a slightly bigger pad than homie. Concrete works isn't hard, just labor intensive.

[@sophiechipps836]

Our family made this, but made it in a hole so it looks under ground

[@duets1370]

Wow, would love to see a pic!

[@Steve-hh8tg]

Where did you find the metal post bases?

[@MS-pd6rm]

Hi
I made them myself. :)

[@DonDomel]

Co to za drewno ? Jak sie nazywaja te deski jak puzzle :) Pzdr.

[@MS-pd6rm]

Cześć drewno to swierk a te deski nazywają się "profil scienny" kupione na skaładzie STAMADREW

[@alantreadwell5369]

What’s the black stuff on top of the concrete and under the posts ?

[@MS-pd6rm]

Hi, the black material is insulating foil

[@dibutler9151]

I don't know why I've never seen anyone do this before, but it's GORGEOUS. Could you give us a vague idea on costs of whole project?

[@physiques]

He already did in a response to Catrina above.

[@MS-pd6rm]

Thanks

[@krzysieklas6656]

Witam,jaki koszt był koszt materiałów? Bez robocizny

[@MS-pd6rm]

Witam koszt materiałów ok 9 tyś zł (3 lata temu) teraz trzeba dak ponad 10 tyś Pozdrawiam

[@fabiangalan8377]

Sorry for asking the same questions a lot of people are asking you did a amazing job can I ask how much was the coast of everything

[@MS-pd6rm]

The materials cost about 2,100 euros, 2,400 $, 1,850 pounds.

[@MS-pd6rm]

the price does not include concrete

[@a.p.001]

How much you charge me for built swimming pool like this one on my back yard?

[@003Blind]

what type of wood did you use?

[@MS-pd6rm]

Hi, wood is a spruce

[@chuckmettler8853]

What did you put between the wood and the liner the white part and your lines

[@MS-pd6rm]

Hi. The white material is agrotextile

[@NievesVelasco]

Y precio .condiciones de envío 📦 gracias