You can use it as a running light and brake light that blinks, I bought this exact setup but I used the harness plug and play and put the red wire with a blue wire and yellow with the red wire and ground to ground
Looks cold man. I swear I could see your breath a couple times. Light looks good. I’m glad you point out that’s it’s the exact same thing for a fraction of the price 👌
why go all the trouble buy the housing and the light bulb, you can buy one on eBay for 11-16 WRX STI XV F1 Style Red Lens Red LED Flasher 3rd Brake Light Lamp for $ 29.98
My buddy went through 3 of those already because individual leds were burning out. With this if the bulb goes out I don't have to replace the entire thing just the bulb.
I actually filmed 2 of them already and didn't like how they came out because one It was getting dark and the other the camera was at a weird angle the whole video. Ill make one soon for sure!
Here's the one I bought. Looks like the price went up $3 but still dirt cheap! www.ebay.com/itm/For-15-Up-Subaru-WRX-STi-CRYSTAL-RED-Rear-Fog-Light-Brake-Lamp-Mounting-Bracket-/322354889646?_trksid=p2349624.m46890.l49292
How would you compare the quality of this kit to the subispeed ones? I’ve been wanting this for my car but I really can’t justify the price for the subispeed kits
The quality on this one is like 95%. I've had Zero issues with it, it still looks and works great. Subispeed has ones with cooler designs but I preferred the simple look of the OEM one and the OEM one on their site is MUCH more expensive than this one and I think its probably the same thing.
@@StreetInspired1 damn, it looks like the one on your car is sold out. Either way I'm probably gonna find a cheap one on ebay, and then use subispeed's $15 harness so I don't have to splice it. It's a lot easier than running an extension cord with my soldering gun out to my garage lol
@@slebano4244 The harness is definitely a good idea! Would make it much easier and easily reversible if you ever want to remove it or switch it out! I didn't think of doing that. Wish I would've but its a little late now. Lol
You can use it as a running light and brake light that blinks, I bought this exact setup but I used the harness plug and play and put the red wire with a blue wire and yellow with the red wire and ground to ground
Which bulb did you use? I’d like to set mine up like that too.
Looks cold man. I swear I could see your breath a couple times. Light looks good. I’m glad you point out that’s it’s the exact same thing for a fraction of the price 👌
Definitely cold. I think it was 26°f when I filmed this lol. Ready for warmer weather for sure! And thank you!
@@StreetInspired1 dang!! working in the cold makes everything 5x harder too.
Have it as a blinking brake light is not bad. More subtle when it’s not a running light.
Is there a way to have it as a non-running light, and just solid (non-strobe) brake light?
For sure! The way it came out of the box it can be wired to only work as a non strobe brake light only!
If u want the red clamps to work everytime u need to squeeze it really hard with the pliers and that will make it cut through the wire.
Thats definitely a solution for the smaller wires however I've actually cut a few wires in half doing that lol
@@StreetInspired1 lol
find the hole... fist it through 🤔🤔🤔🤔😏😏😏😏🔥🔥🔥🔥🔥
hold my 🍺🍻🍺
Theres a strobe module you can get. So you can run a regular led bulb which will strobe and also work as a running light
do you have a link?
one of the first mods i did las get the led f1 foglight with the flash .Subispeed is a big ripoff
@Street Inspired Thanks for the video! How is the light holding up as of today?
I can’t decide on the wrx or sti. Such a hard decision
why go all the trouble buy the housing and the light bulb, you can buy one on eBay for 11-16 WRX STI XV F1 Style Red Lens Red LED Flasher 3rd Brake Light Lamp for $ 29.98
My buddy went through 3 of those already because individual leds were burning out. With this if the bulb goes out I don't have to replace the entire thing just the bulb.
I'm also not crazy about the individual leds look
looks dope bro! also, would love if you can make a POV drive sometimes :D
I actually filmed 2 of them already and didn't like how they came out because one It was getting dark and the other the camera was at a weird angle the whole video. Ill make one soon for sure!
So what number did you end up buying at Walmart for the bulb is it 1157?
Do you have a link to the product?
Here's the one I bought. Looks like the price went up $3 but still dirt cheap!
www.ebay.com/itm/For-15-Up-Subaru-WRX-STi-CRYSTAL-RED-Rear-Fog-Light-Brake-Lamp-Mounting-Bracket-/322354889646?_trksid=p2349624.m46890.l49292
How would you compare the quality of this kit to the subispeed ones? I’ve been wanting this for my car but I really can’t justify the price for the subispeed kits
The quality on this one is like 95%. I've had Zero issues with it, it still looks and works great. Subispeed has ones with cooler designs but I preferred the simple look of the OEM one and the OEM one on their site is MUCH more expensive than this one and I think its probably the same thing.
@@StreetInspired1 damn, it looks like the one on your car is sold out. Either way I'm probably gonna find a cheap one on ebay, and then use subispeed's $15 harness so I don't have to splice it. It's a lot easier than running an extension cord with my soldering gun out to my garage lol
@@slebano4244 The harness is definitely a good idea! Would make it much easier and easily reversible if you ever want to remove it or switch it out! I didn't think of doing that. Wish I would've but its a little late now. Lol
What overlays do you have on the tail lights?
They aren't overlays I actually painted them. Here's one of my 3 videos on it if you're interested th-cam.com/video/1uVMZGiKnZk/w-d-xo.html
Subispeed sucks don't they? They just resell the same Chinese crap for 10x the price.