thanks this video was helpful today coz I was doing wiring like this except this neutral wire goes in series and and I did it in parallel and this was very an it was a very useful video thank you once again. I won't forget it again.❤❤❤
Was the switched live cable reversed between the bulbs during the cut when you flipped the switch over? Originally it looked like the left light was connected to the right side when viewed from the front ( left when viewed from behind ) and vice versa.
Viewing this on my phone where the picture is not so brilliant so would appreciate knowing what the first two are you bridged across. We're the terminals labelled Common, or L1 or L2? And then Wray are the others.
Because of the live , bettwen those liver, there's main and supporting... A liver that lights 2 bulbs is a main as it it receive the power and also transfer to second liver,if the power finds second switched on the bulb will light
I saw red connect to the switch n one end of the bulb. The black connect to one end of the bulb. Where is the other end of the black connect to? And I saw u bridge the switch with a piece of red wire. Can u tell me the reason why. To my suggestion I think is to make contact with both switch. Is that correct?
I saw u bridge the switch with a piece of red wire (is to distribute the LIFE power from house main power supply to both switch).. your suggestion is correct. then, from each switch going to supply each bulb... (when switch ON)
No explanation needed. Excellent video. Probably the best to explain from a wiring point of view. Thank you
This video helped so much and when I got stuck i came back and watched it again. Thank you
Thank you so much. One of the wires on mine came lose and this helped me fix it without calling the electrician 🎉🎉😂😂
ماعرفت لمفتاح اللنبه حتى شفتك والله تستاهل ١٠٠٠ لايك 😊❤
A picture is worth a thousand words.
Great video, thanks. That's saved me having to call an electrician. Subscribed.
After using hours of hours to fix my light bulb, this video helped me
Great video, thanks. That's saved me having to call an electrician. 👍👍👍
Good one it's always hard for me to run it but I. Learned now thank you
Perfect.! Simple explanation without saying a word...! Well done Mate 👍🙂
That's perfect. Clear and easy to follow. Thanks.
He forgot to turn off the mic, simple and useful 👍
Brilliant 🙌 you’ve got another subscriber
thanks this video was helpful today coz I was doing wiring like this except this neutral wire goes in series and and I did it in parallel and this was very an it was a very useful video thank you once again. I won't forget it again.❤❤❤
Was the switched live cable reversed between the bulbs during the cut when you flipped the switch over? Originally it looked like the left light was connected to the right side when viewed from the front ( left when viewed from behind ) and vice versa.
well done,I like the way you do it
Omg! Im so stupid! It all make sense now! You explained to me without even saying a single word! THANK YOU!
Literally without saying a word🤣
Hahaha... Maybe silent mode... 😂😆
I believe I can follow the same step to use a 2gang switch for my wall bracket and center bulb
Next time try to put audio in your videos to help beginners learn properly.
Good explanation. From Qatar
great help easy to follow thanks
Very simple to comprehend
Gud job brother
Thanks so much is wonderful job
Just what I was looking for 👍
Viewing this on my phone where the picture is not so brilliant so would appreciate knowing what the first two are you bridged across. We're the terminals labelled Common, or L1 or L2? And then Wray are the others.
Just had a look on my laptop and can now see the labels. Thanks for the vid very helpful. 👍🏾
Next time try to put audio in your to help beginners learn properly
I thought each gang for each bulb, but yours one gang switches them off at one
thanks .. learn from your video
Thanks, nextime include vocals
That's perfect thanks so much 👏👏👏👏
Thank you very much.
Do you not need to see the L1, L2 and Common etc or have I just got a complicated switch?
Use L1 if you're switching 1gang. 1way
@@powerelectric8833 OK thanks for response 👍🏽 I'm trying to wire a double gang switch which has two of each= L1, L2 and Common (six in total)
Thank You Power Electric.
Welcome
Thats great explanation
Just finish doin it thanks
Thank you so much
If I want to run my 12v lights off a common single household light switch..how do I wire it please?
Any help would be greatly appreciated
Would it be..live from battery to top hole, live back out of bottom left hole to the lights then negative from bottom right hole to negative on lights
Hi from buttery use only + to switch the light, and - direct to light
Thanks for the vid, finally got it working. So help full … 😂👍🏼
Alhamdulillah
How come the two bulbs lights at the same time?
Because of the live , bettwen those liver, there's main and supporting... A liver that lights 2 bulbs is a main as it it receive the power and also transfer to second liver,if the power finds second switched on the bulb will light
great video
Wow nice video
عاشت ايدك ربي يحفظك
اخرس هذا
Big up master🙌🙌🙌
2:23 Owh, 👍🏼👍🏼
How come the two bulbs light at the same time?
they did not light the same time
it just reflected
Excellent
Perfect
رائع جداً
Thank you 👍🏻👍🏻👍🏻
I saw red connect to the switch n one end of the bulb. The black connect to one end of the bulb. Where is the other end of the black connect to? And I saw u bridge the switch with a piece of red wire. Can u tell me the reason why. To my suggestion I think is to make contact with both switch. Is that correct?
I saw u bridge the switch with a piece of red wire (is to distribute the LIFE power from house main power supply to both switch)..
your suggestion is correct. then, from each switch going to supply each bulb... (when switch ON)
Perfect!!!!
Learnt something here
Good, but why use two way?
Thanks a lot
Good video
Thank you
Ggod job
Nice one,
Thank you
Bro can u show how to wire a ceiling fan
Lov this
HOLDING. THAT. SCREW DRIVER BY THE. SHANK. BAD BAD. HABBIT.
🤣🤣🤣🤣🤣
2gange me alag alag light 🕯️ ko jalaiye sir
Silent is good 😌
❤
pls what if i have any earth wire , where do i fix it , because as i can see in the video , u have just the Live and Neutral cables ? pls help
You only use earth wire where is metallic object
Cant you talk to explain it
So how can one gang control one light and the other gang control both lights...... Why ? Please 🤔🤔
Each Gang is controlling only one light... See the video again.
Yes
#1
That’s easy 😮
So the whole set up involves live wires?!😲
🤭
I don’t understand how to wire connect another wire 🥵
fantastic
I don't like
😮চাজাক😅