I have no interest in acars at all but I watched the whole video purely because of your presentation. Your chatty, informal style is very watchable. Nice work.
This video popped up in my recommendation list, I had no idea what ACARS was and after you said what it was I thought that's of little interest to me. But! I then saw a couple of comments about cmake and thought that might be something I'd be more interested in. So after watching this video (excellent by the way) I had a look at what else is on the channel and discovered that it's a goldmine of knowledge w.r.t everything networking! A subject I know very little about but would like to know much more about. So time for me to get comfortable because I've got A LOT of videos to watch and learn from now; I've already done three after watching this one, so a huge thanks for making so much great content! .. I just had to come back and comment as well as feed the algorithm. 😀
Nice! If you are doing requests, how about some LoraWAn stuff? I found this video by Andreas Spiess interesting where he alluded to using a pi + Lora Concentrator to become part of the Helium network. Given the lack of prebuilt hardware I think it would be interesting to go the diy route. Yes? No?
im trying to install acarsdec but its like there is a step missing and i have missing files/directories and can not find the exact link to the github file as the link listed downloads the pdf and is missing the full link itself.did i actually miss a step to get into the correct directory where everything is downloaded and stored?this is the last step and ive been working on it for hours to no avail.and thank you for the video.only one that is working for me :)
Ideally yes for best results. Our man here is using a discone which covers a wide range of frequencies which is handy when you not sure what you feel like playing with. Best results will always be obtained using an antenna tuned to the frequency of interest. For example adsb is 1090Mhz and a discone isn’t going to much good for anything other than a plane directly overhead - but you can make a coax colinear for adsb, i’ve got 200miles reception from one.
Hi, take care of that power converter for powering the pi. It might be very noisy. Ideally you could try a powerbank even though some are good some are also noisy.
"log messages will tell you everything you need to know." Said no "msdn", winapi, or developer ever. 🤣. The ambiguity or RFC jargon in some messages is terrible. It's not able to connect, neither side agree... Oh, one of the hexadecimal values on that SIM card were encoded in decimal instead of hex by the sim software.... And this problem only appears in very specific handoff type situations under the right planetary-alignment conditions, no logs tell you why it's not working, it just can't authenticate! Hah.
I have no interest in acars at all but I watched the whole video purely because of your presentation. Your chatty, informal style is very watchable. Nice work.
Was just about to write the exact same comment
This video popped up in my recommendation list, I had no idea what ACARS was and after you said what it was I thought that's of little interest to me. But! I then saw a couple of comments about cmake and thought that might be something I'd be more interested in. So after watching this video (excellent by the way) I had a look at what else is on the channel and discovered that it's a goldmine of knowledge w.r.t everything networking! A subject I know very little about but would like to know much more about. So time for me to get comfortable because I've got A LOT of videos to watch and learn from now; I've already done three after watching this one, so a huge thanks for making so much great content! .. I just had to come back and comment as well as feed the algorithm. 😀
...the algorithm... don't get me started!
Nice! If you are doing requests, how about some LoraWAn stuff? I found this video by Andreas Spiess interesting where he alluded to using a pi + Lora Concentrator to become part of the Helium network. Given the lack of prebuilt hardware I think it would be interesting to go the diy route. Yes? No?
This was a terrific instruction on cmake...I have done a few, but never understood the process till now!
Thanks.
Simple, fast and no bullshittalking.
You made my life so much easier with cmake man, thanks. Sometimes it just takes a little nudge in the right direction!
Thanks a lot. Probably not indended but I leanred a lot about cmake and debugging it.
Very clear and helpful instructions. Thanks.
Great tutorial! I went wrong with the folder structure but I'm now a little bit higher up the learning curve!
Good tutorial indeed. What kind of antenna are you using?
Super useful !!!
im trying to install acarsdec but its like there is a step missing and i have missing files/directories and can not find the exact link to the github file as the link listed downloads the pdf and is missing the full link itself.did i actually miss a step to get into the correct directory where everything is downloaded and stored?this is the last step and ive been working on it for hours to no avail.and thank you for the video.only one that is working for me :)
When you connect your SDR to an antenna, do you need a different antenna for each frequency?
Ideally yes for best results. Our man here is using a discone which covers a wide range of frequencies which is handy when you not sure what you feel like playing with. Best results will always be obtained using an antenna tuned to the frequency of interest. For example adsb is 1090Mhz and a discone isn’t going to much good for anything other than a plane directly overhead - but you can make a coax colinear for adsb, i’ve got 200miles reception from one.
I think you need some larger speakers on your desk
I like your thinking :)
Good job!
Hi, take care of that power converter for powering the pi. It might be very noisy. Ideally you could try a powerbank even though some are good some are also noisy.
How legal is this?
How legal is what?
depends where you live. in germany it is not legal.
@@larspregge6420 That's not saying much
libacars made by Tomasz Lemiech from Poland. Nice.
Wszystko jedno :)
Noice. I do pocsag.
You deffo need a ham licence.
What about ADS-B? Far more useful information in ADS-B
ADS-B has already been covered here. th-cam.com/video/Y5HeQEjLmwc/w-d-xo.html
"log messages will tell you everything you need to know." Said no "msdn", winapi, or developer ever. 🤣.
The ambiguity or RFC jargon in some messages is terrible. It's not able to connect, neither side agree... Oh, one of the hexadecimal values on that SIM card were encoded in decimal instead of hex by the sim software.... And this problem only appears in very specific handoff type situations under the right planetary-alignment conditions, no logs tell you why it's not working, it just can't authenticate!
Hah.
That shirt was made for jogging. Or basketball. Tech videos, not so much.
Almost formal wear in certain parts of Australia. And why worry about it? This isn't a fashion channel. :-)
Really Chris W, mate you need to get out more!!
You mean you want me to take it off?