Shear Strength - Problem No. 1 (Part 1 of 2) NSCP 2015

[@charliemangata950]

Sir tanong lang bakit yung radius mo ginamit mo is 10? Dba naka diameter ung 10mm?

[@adrianjustineabong3381]

Thank you po sir for this tutorial..sakto ito po topic namin ngayon..big help po yung tutorials niyo

[@jebbongcac7833]

Salamat po. Hahaha natawa aku sa given ay hindi ah memorize yan sa utak mu kaya given.

[@experimentoruser9917]

sir bakit lagi bang cross section area ng isang stirup ang Av min?

[@tabinasnicagracev.110]

Question po, pwede po ba maging negative ang Vs. If yes po ano po ibig sabihin? thanks in advance.

[@CivilEngineerMachan]

For full detail explanation regarding your question, please watch my video shear strength the basics. Thank you! 🙂

[@marianeliatadeo7967]

@@CivilEngineerMachan hello sir, inulit ulit ko nman po ung part ng vs and s kaso po wala po kayo nabanggit if ung value ng vs is negative edi ang magiging s po namin ay negative , considered smallest value po ba un like this po ang nacompute ko po na s ay, s = -369.72, Vs = -95333 N, Vs compare kay formula 0.33... = 283.931 , now my Vs < 283.931, Smax = 271 or 600, ibig sabihin po ba ang s ko po ay -369 or ididisregard po ung negative then ang mag gogovern ung Smax = 271? sana po maenlighten nyo po kami regarding this. Thank you sir.

[@ashleystaana5558]

@@marianeliatadeo7967 pag nag negative VS mo check mo siya sa ØVc and 0.5ØVc. Pag mas malaki yung 0.5ØVc mo sa Vu. No shear reinforcement needed. It means kaya na buhatin mag isa ni concrete

[@ElmerBaldesanso]

loads nahirapan kami kasi may earthgqukae laod kaming kinoconsider , paano ba kunin yung X1 at X2 para sa spacing kung may earthquake load na kasama?

[@mr.d3916]

Earthquake load sa beam? Ung diagram nyan sa actual prang Vu ng simple beam.

[@vanirianguerrero1297]

Salamat po master

[@WayMathia]

thanks po engr.

[@ham4344]

Thank you po Engr.

[@tupaymakiri4108]

Reduction factor 0.17?

[@uchiha1511]

Engineer nalilito lang ako, kapag mataas ba ang Vs, dapat ibaba yung Spacing?

[@yummytea3393]

Oo ata boss kasi daw inversely proportional ang spacing sa Vs .

[@alvinocampo6719]

Oo. Kung mataas yung value ng Vs ibig sabihin marami kang ilalagay na stirrups dun sa critical part ng beam so ipagsisiksikan mo ung maraming stirrups dun sa space na yun. Edi liliit talaga spacing mo

[@cutennanegr]

thanks engr !!!

[@ellezarcatarajajr.5565]

Thank you master engr.

[@KevinbertSSison]

Thank you po Engr.😊

[@jesnaz517]

Hindi ko po makuha yung vs. Sa total po.

[@michaelmurakami3487]

sir pano po kaya pag zero yung Vu?

[@CivilEngineerMachan]

Please watch my video shear strength the basics. Hope it will answer your query. Thank u!

[@marsthewargod2095]

NAKAKALOKA hahaha thank you

[@jofreddoria3769]

Thank you sir. footing po sana.

[@carltolentino2044]

(d/s) =no. of stirrups ba?

[@CivilEngineerMachan]

Please watch my video shear strength the basics. Hope it will answer all your questions :)

[@juliusviolante2909]

Pa request naman po pre stress Engr

[@zethversoza6629]

mahal na ata kita engineer

[@alybldg1653]

Pa request po ng Torsional Stregth nang Concrete Canopy. Thank you po!

[@rosechellledesma4721]

bat ka po galit? 🤣